User`s guide

5.1.2 Enable Display Label

This command displays or hides the OSD (On Screen Display). When the

OSD is enabled, each time you press any one of the multimedia buttons,

its function name (button label) will show on the right-bottom corner on the

screen. This function is enabled by default.

5.1.3 Enable Taskbar Icon

This command displays or hides the taskbar software icon. When the

function is enabled, you can see a software icon on the Windows

taskbar, its function name (button label) will show in the right-bottom

corner of the screen. If you want to re-activate it, you can select Start

=> Programs => Configure to launch it. This function is enabled by

default.

5.1.4 Enable Auto Play

This command activates the auto play function. When the function is

enabled, the Microsoft Media Player will appear after you press the "Play"

multimedia key. Winamp users may use the multimedia keys to control the

Winamp Player after the key is programmed and the AutoPlay function is

disabled.

5.2 To Display the "Configure Button" Dialogue Box

Each button has the ability to work in

any of the following manners. Simply

select what type of configuration you

like by selecting the appropriate circle

and follow the steps below.

5.2.1 Label

In the Label box, type the name of the

application that the button will launch,

or any name you associate with the

function of the button. This label will

appear on screen each time you press

the button.

5.2.2 Functions

You can see a list of the pre-defined functions or change the function of any

button.