MINI SYSTEM STEREO AM/FM 3 CD CHANGER WITH DUAL CASSETTE RECORDER MODEL: MX5310 BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS COMPLETELY E-1 Memorex.
WARNING: To reduce the risk of fire or electric shock, do not expose it is appliance to rain or moisture. CAUTION: Use of controls or adjustments or performance of procedures other than those specificed may result in hazardous radiation exposure. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside.
IMPORTANT SAFEGUARDS CAUTION : • • • Read all of these instructions. Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the product and in the operating instructions should be adhered to. 4.
15. OUTDOOR ANTENNA GROUNDING If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.
CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT IN CABINET OR IN ANOTHER CONFINED SPACE IN ORDER TO KEEP WELL VENTILATED CONDITION.
LOCATION OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29.
LISTENING TO THE RADIO Manual tuning 1. Press the TUNER button to select tuner mode. 2. Press the BAND SELECT button to the desired band. a) For FM Stereo reception: The unit provides FM MONO / STEREO selector (combined with Beat Cut selector). In Stereo mode, the unit will automatically switch to stereo when an FM stereo broadcast is received and stereo mark turn on in the display. b) For FM MONAURAL (MONO) reception: To receive weak (noisy) FM station, to set FM MONO / STEREO selector to MONO position.
TO INTERRUPT PLAYBACK: 1. 2. Press the PLAY / PAUSE • “ “ will appear. Press the PLAY / PAUSE button. button to resume playback from the same point. TO STOP PLAYBACK: Press the STOP button. TO REMOVE THE CDs: Whilst in the stop mode, press the OPEN / CLOSE button. • The disc tray will open. Remove the two discs. Then press the DISC SKIP button to rotate the disc tray and remove the remaining disc.
PROGRAMME PLAYBACK Use this function to programme the CD player to playback tracks in the order that you like. Up to 20 tracks can be programmed. Programme play is operated with the remote control or cabinet. 1. Press the PROG button If a disc(s) has already been loaded, the CD player will go directly to the programming mode and the “PROG” indicator will show on the system display. The disc number displayed indicates the disc that is ready to be programmed.
INSERTION AND REMOVAL OF CASSETTE – – – – Press Stop / Eject Key to open the cassette door. Put your cassette tape down the holder properly, with the exposed section Downward and the playback side facing you. Close the cassette door securely before starting. When finished press Stop / Eject Key to open the cassette door and retrieve your cassette tape. PLAYBACK – – – – – – – You can choose either TAPE A / 1 or TAPE B / 2 for playback. Press the TAPE Button. Put in your cassette tape.
CLOCK SETTING • – • • – • • Press the CLOCK set button twice. The hours start flashing. Press the TUNING Button ( or ) to adjust the hours. Press the CLOCK Set button again. The Minutes start flashing. Press the TUNING Button ( or ) to adjust the minutes. Press the CLOCK Set button or wait a few seconds and the clock will start running. TIME DISPLAY FORMAT: • – All the time information is shown in either 12h or 24h format.
SLEEP TIMER The sleep timer is a countdown timer for switching the system to standby mode after a specified time. It enables you to listen to the radio, a CD or a cassette prior to falling asleep. The sleep timer can be set from 120 to 15 minutes. • Switch on the system by pressing the STANDBY (power) button, either on the system or on the remote control. – The STANDBY indicator disappears. • Select the sound source by pressing TAPE, TUNER / BAND, AUX or CD. • Press the SLEEP button to set the sleep time.
REMOTE CONTROL TRANSMITTER CONTROL FUNCTIONS BATTERY INSTALLATION The infrared transmitter requires 3.0 volts for operation. BUTTON DESCRIPTION 1. 2. POWER button Function Mode CD TAPE TUNER (BAND) AUX 3. PROGRAM 4. DISC SKIP 5. REPEAT 6. TIMER ON / OFF 7. VOLUME + / – 8. PLAY / PAUSE 9. STOP 10. TUNING / SKIP + / – For CD 11. 12. 13. 14. 15. 16. For Tuner For Clock setting MUTE CLOCK PRESET-EQ RANDOM PRESET / REMAIN 17. SLEEP – To switch the unit to standby mode.
TROUBLESHOOTING GUIDE BEFORE REQUESTING SERVICE, PLEASE REFER TO THE FOLLOWING CHART FOR THE SYMPTOM AND POSSIBLE SOLUTION. SYMPTOMS POSSIBLE CAUSES POSSIBLE SOLUTIONS FUNCTION SELECTOR SWITCH NOT SET TO CD POSITION SET FUNCTION SELECTOR SWITCH TO CD POSITION. CD NOT INSTALLED OR INSTALLED UPSIDE DOWN. INSERT CD WITH LABEL SID E UP. DISC IS DIRTY OR SCRATCHED. WIPE DISC WITH A SOFT CLOTH OR TRY ANOTHER DISC. CD PLAYER CD PLAYER WILL NOT OPERATE CD SKIP WHILE PLAYING.
LIMITED WARRANTY AUDIO/PHONES We at MEMOREX believe you will be pleased with your new Product. Please read this Warranty carefully. Memorex warrants this product to be free from manufacturing defects including original parts and workmanship for a period of ninety (90) days from the date of original purchase in, and if used in, the United States.
MPD8845.O/M.QXD 6/25/02 11:55 AM Page 23 Memcorp, Inc. Weston, Fl Printed in Hong Kong Visit our website at www.memcorpinc.
