User`s guide

2. Use the slide switch, located inside the battery compartment of the mouse,

to select the same channel as the one selected on the receiver and on the

keyboard.

3. Insert the included AAA rechargeable batteries into the compartment.

Follow the polarity signs in the battery compartment and make sure the

batteries are placed in the correct direction

4. Replace the battery compartment lid and place the mouse in the

Mouseport™ charging station.

5. Connect the included AC adapter to the Mouseport™ and plug the power

supply into an electrical outlet.

6. Make sure the green light on the Mouseport™ is on to confirm that power

is being supplied.

7. Let the mouse charge for 8 hours before first use with your computer.

Channel Slide Switch

Notes:

1. The keyboard uses two pieces of standard UM-3 (AA) 1.5V batteries, and the

mouse uses two pieces of rechargeable (AAA) batteries.

2. Battery life for the keyboard is approximately 3-4 months, depending on the

intensity of usage. Battery life for the mouse is approximately 8 hours

between charges.

3. Make sure the receiver is at least 8 inches away from the monitor and is

placed in a location relatively free of strong electromagnetic or transmission

sources. This helps to ensure optimal reception of the keyboard and mouse

signal.

4. Your computer should be off during the entire hardware installation

and channel selection process.

5. The rechargeable batteries for the mouse must be charged for 8 hours

before first use.