Installation manual
Simrad MX500 | 111
3 Advanced Operation
Conguration
The CFG screen includes setup and control of all of the
receiver’s primary functions. There are more than 20
separate configuration items in this screen. The display is
divided into two windows. The left hand window identifies
the primary configuration items. The right hand window
displays the current settings. Use the cursor key to select
a configuration item of interest, then press the EDIT
key to edit the actual settings. There are some settings
which can not be changed; however, these are displayed
so that you have a better understanding of exactly how
the receiver is configured. The Item list is arranged al-
phabetically based on the language chosen. This section
of the manual is arranged alphabetically for English. You
may choose to skip to only the items that interest you at
first, then read this complete section at a later time.
The conguration list is too long to show in one page of
the display. To view all of the conguration menu, scroll
through to the bottom of each list with the cursor key.
Alarms
This screen allows you to quickly see which alarms are
active and inactive. The list of available alarms is interac-
tive with the remaining screens described in this section.
Therefore, changing the state of the alarm in a screen
such as Anchor from Off to On will also cause the anchor
alarm in this screen to go from Off to On. Likewise, if you
turn the anchor alarm from On to Off in this screen the
Anchor screen will also match this one.