Installation manual

68 | Simrad MX500
Highlight the 4 Unlock this WPT softkey then press
ENT.
Press the 5 EDIT key.
If you simply want to modify the waypoint, Edit this WPT
will be displayed on the bottom left of the screen.
To Lock all Waypoints
Select the 1 WPT key until the WPT1 screen is dis-
played.
Move the cursor to the desired waypoint. 2
Press the 3 EDIT key.
Highlight the 4 More softkey and press ENT.
Highlight the 5 More softkey again and press ENT.
Highlight the 6 Lock all WPT softkey and press ENT.
Press the 7 EDIT key.
To Unlock all Waypoints
Select the 1 WPT key until the WPT1 screen is dis-
played.
Move the cursor to the desired waypoint. 2