URC 4880 VIDEO EXPERT PLUS WITH LEARNING Universal Remote Control 4-DEVICE User’s Guide
TABLE OF CONTENTS INTRODUCTION Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features And Functions . . . . . . . . . . . . . . . . . . . . . . 4 The One For All® 4-Device Video Expert Plus With Learning remote control is our latest-generation universal remote control, designed specifically for controlling video components. Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURES AND FUNCTIONS Use the illustration below to locate One For All 4-Device Video Expert Plus With Learning remote control features and then study the Key Charts (on the next two pages) to learn how they function. Key Charts Use SET for all programming sequences. The LED (red light) blinks to show that the remote control is working and is sending signals. Use M.POWER to set up and turn on (or off) all TV,VCR, and DVD components with a single key.Also see page 25.
FEATURES AND FUNCTIONS INSTALLING BATTERIES Key Charts (Continued) Press PIP once to view or turn off the picture-in-picture feature. Press SWAP once to exchange the PIP with the main TV picture. ❶ Use MOVE to the picture-in-picture position on the TV screen. Press SLEEP once to enable (or disable) a selected component’s sleep timer (if available). Use DISPLAY to view a selected component’s information on the TV. Use the keypad (0 ~ 9) to directly select channels (e.g., 09 or 31).
PROGRAMMING TV CONTROL NOTE: If you own a TV/VCR combination, skip this section and perform “Programming TV/VCR Combo Control” on page 16. Locate the brand name of your TV in the Setup Codes For TVs section below, and write it in the following space. TV Brand: __________________________________ The brands are listed in alphabetical order with the most popular codes listed first. To program TV control: 1. Turn on the TV. 2. On the remote control, press TV once.
PROGRAMMING TV CONTROL Setup Codes for TVs (Continued): KEC KTV Kaypani Kenwood LG LXI Luxman MGA MTC Magnavox Marantz Matsushita Megatron Memorex Midland Mitsubishi Motorola Multitech NAD NEC NTC Nikko Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland Prism Proscan Proton Pulsar Quasar RCA Radio Shack Realistic Runco SSS Sampo Samsung Samsux 0180 0180, 0030, 0039 0052 0030, 0019 0056 0047, 0054, 0154, 0156, 0178 0056 0150, 0030, 0178, 0019 0060, 0030, 0019, 0056 0054, 0030
PROGRAMMING VCR CONTROL NOTE: If you own a TV/VCR combination, skip this section and perform “Programming TV/VCR Combo Control” on page 16. Locate the brand name of your VCR in the Setup Codes For VCRs section below, and write it in the following space. VCR Brand: __________________________________ The brands are listed in alphabetical order with the most popular codes listed first.
continued on next page...
PROGRAMMING TV/VCR COMBO CONTROL 6. Write your TV/VCR Combo code in the boxes below for future reference. Locate the brand name of your TV/VCR Combo in the Setup Codes For TV/VCR Combos section on the next page, and write it in the following space. TV/VCR Combo Brand: ________________________ The brands are listed in alphabetical order with popular codes listed first.
PROGRAMMING CABLE CONVERTER OR SATELLITE RECEIVER CONTROL Locate the brand name of your Cable Converter or Satellite Receiver in the Setup Codes For Cable Converters or Setup Codes For Satellite Receivers section starting below, and write it in the appropriate space. Cable Converter Brand: ________________________ or Satellite Receiver Brand:________________________ The brands are listed in alphabetical order with the most popular codes listed first.
continued on next page...
PROGRAMMING DVD PLAYER CONTROL (Continued) Setup Codes for DVD Players: Denon GE Harman/Kardon JVC Kenwood Magnavox Marantz Mitsubishi Onkyo Optimus Panasonic Philips Pioneer Proscan RCA Samsung Sharp Sherwood Sony Technics Theta Digital Toshiba Yamaha Zenith 0490, 0634 0522 0582 0558, 0623 0534 0503 0539 0521 0503, 0627 0571 0490, 0632 0503, 0539 0525, 0571, 0632 0522 0522 0573 0630 0633 0533 0490 0571 0503 0490, 0545 0503, 0591 SEARCHING FOR YOUR CODE If your video component does not respond to the One
CHECKING THE CODES PROGRAMMING THE MASTER POWER KEY FOR ALL ON/OFF If you have set up the One For All 4-Device Video Expert Plus With Learning remote control using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV: With the One For All 4-Device Video Expert Plus With Learning, you can program the M.
RE-ASSIGNING DEVICE KEYS CHANGING VOLUME LOCK The One For All 4-Device Video Expert Plus With Learning remote control can be set up to control a second TV or VCR, or any combination of four video components. For example, to have the unit control a TV, a Cable Converter, and two VCRs, you will need to re-assign the unused DVD key to operate the second VCR as follows: The One For All 4-Device Video Expert Plus With Learning remote control is preset to control the volume of a component through your TV. 1.
CHANGING VOLUME LOCK (Continued) USING KEYMOVER To change Volume Lock back to the TV mode: 1. On the remote control, press and hold SET until the LED blinks twice, then release SET. The One For All 4-Device Video Expert Plus With Learning remote control includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode)to another (i,e, destination mode). 2. Enter 9 - 9 - 3 and then press TV once. The LED will blink twice.
USING LEARNING KEYS Use the learning keys (L1, L2, L3, L4) to add functions that are unique to your home entertainment components (e.g., Tracking Up or Down for a VCR). NOTE: Please have your original remote controls handy before programming learning. Be sure to press each key within 10 seconds of the previous entry. If not, the remote control will exit the programming mode. 9. To test a new feature, press the component key (e.g., TV) that was learned once. Then press the L key (e.g.
USING THE VIDEO CONFIGURATION MODE step 9. The One For All 4-Device Video Expert Plus With Learning remote control includes a powerful Video Configuration feature that allows you to combine the most used functions of your Audio/Video equipment into one V.CONFIG mode. The features you can combine are organized into five groups and can be defined by specific modes as follows: 4. Select a key from Component Group 1 (i.e., VCR or DVD) and press it once. Press PLAY to assign Function Group 1 (i.e.
USING THE VIDEO CONFIGURATION MODE An Example Video Configuration (Continued) 5. 6. Press TV once and then press VOL+. The LED will blink twice. Press CBL/SAT once and then press CH+. The LED will blink twice. TROUBLESHOOTING PROBLEM: SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 7). PROBLEM: Press CBL/SAT once and then press MENU. The LED will blink twice. 8. Press TV once and then press PIP. The LED will blink twice. 9.
ADDITIONAL INFORMATION The One For All 4-Device Video Expert Plus With Learning remote control does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your remote control. ©2000 by Universal Electronics Inc.
