OWNER’S MANUAL SMC3
INSTALLATION ........................................................................................................ 3-4 WIRING CONNECTION.............................................................................................. 5 OPERATION ............................................................................................................... 6 LOCATION OF THE KEYS ........................................................................................ 6 KEY FUNCTION ...........................
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION 4
CONNECTION 5
OPERATION. LOCATION OF KEYS 1. 2. 3. 4. 5. button button Play/pause button Seek up button button 6. CAM button 7. button 8. VOL button 9.Power/SRC button 10.
KEY FUNCTIONS Key functions KEYS ACTIO N RADIO USB AUX BT MUSIC STANDBY PWR/ Short Source change Source change Source change Source change Power on SRC Long Power off Power off Power off Power off / Camera Camera source source Camera source Camera source / / / / / / Setting menu Setting menu Setting men Setting menu / back / back / back / back Long Exit menu Exit menu Exit menu Exit menu / Short Night/Day Night/Day Night/Day Night/Day / Long Dimmer(H/L)
OPERATION Basic Operation Turn on/off the unit Press /SRC button to turn on the unit. When the unit is on. Press and hold it for 2 seconds to turn off the unit. Mute on/off When the unit is on. Press ►II button to mute the sound. Press it again to resume the sound. Setting menu Press button into the setting menu.
OPERATION previous source. In this way speaker keeps previous source sound. Reset function In the setting menu, select RESET item to restore all the data to the factory setting. Radio Operation Press SRC button then rotate VOL knob to select FM/AM source. Shortly press / button to receive the desired radio station. Press and hold / button for manual tuning the frequency. Auto Store: Press ►II button for 2 seconds to auto store stations to the presets. Manually store station: Receiving a desired station.
OPERATION WB (Weather Band) Operation Press SRC button then rotate VOL knob to select WB source. Select station: Press ★ button into the presets, rotate VOL knob to select the desired preset, then press VOL knob. Press / button to select next/previous station. USB Operation When an USB driver is inserted to the unit, the unit will play the MP3/WMA file automatically. If an USB drive is already inserted in the unit. Press SRC button then rotate VOL knob to select USB source.
SPECIFICATION GENERAL Power Supply Requirements Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 kHz) Maximum Output Power Current Drain RADIO Frequency Coverage IF Sensitivity Stereo Separation : DC 12 Volts, Negative Ground : 140(W) x 130 (D) x 85(H) : ±10 dB : ±10 dB : 4 x 40 watts : 15 Ampere (max.) FM 87.5 to 107.9 MHz 10.7 MHz 4μV(S/N=30dB) >25dB AM 530 to 1710 KHz 450 KHz 36dBuV TROUBLE SHOOTING Before going through the checklist, check wiring connection.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
