Feel Design User Guide Instruction manual MEDIADISK LX Series
USER GUIDE 1. SAFETY AND OTHER INSTRUCTIONS...................................................... 1 2.REMARKS..................................................................................................... 2 3. PRODUCT PERFORMANCES..................................................................... 2 4. ACCESSORIES............................................................................................ 3 5. PRODUCT USE.................................................................................
1. SAFETY AND OTHER INSTRUCTIONS Please use Mediadisk LX Series carefully and read following instructions. >>> Copyright Software, audio, video or any intellectual properties are protected by copyright and international laws. It is user’s responsibility when reproducing or distributing content(s). >>> Codec Check This product may not support some media formats. Please check available codec types. >>> Data Backup Please backup datas stored in this product in a safe place.
A National patent has been registered for this product. Any imitation will be regarded as pirate, and the author will be prosecuted. This product complies with national low-voltage electronic appliances safety standards, and acquires American FCC certificate with Standard Part 15 Class B, and European Union CE certificate with Standard EN55022 Class B, EN61000-6-3, EN61000-6-1. 2. REMARKS 1.
4.
Remote Control functions : Key POWER MUTE SETUP ZOOM MODE ANGLE SUB-T VIDEO AUDIO MENU OPTION ENTER VOL+ VOLREPEAT Slideshow DVD play Function Turns the unit on/off Turns the sound on/off Opens configuration menu Zoom on images While watching slides, this function changes the transition mode between photos. When playing music, it changes the pre-equalized modes. Rotates images. Select to view scene from different angle, if the DVD was recorded in multiple angles.
5. PRODUCT USE 5.1 Device Connection Connect the device as indicated in the pictures, switch on the power and follow these steps: 1. AV(CVBS) mode: press INPUT CHOICE key of the TV, and turn to AV INPUT MODE. If no image appears, press VIDEO key of the Media player remote control and wait for a few seconds until it turns to CVBS mode, then menu appears on TV. AV OUTPUT MODE 2. YPbPr output mode: choose YPbPr as input mode for TV.
3. HDMI output mode: press VIDEO button on remote control of media player to choose the HDMI output mode. The menu then appears on the TV. HDMI Output 4. Coaxial output mode: Connect the product to external device with coaxial input through coaxial cable. Coaxial output connection 5.2 USB Host usage After plug in an USB device, a menu listed all of storage equipment is displayed. Press KEY to choose the storage equipment. Press the ENTER KEY to enter its main menu.
5.6. Playing movies: Select MOVIE icon with the [Menu] button from remote control, and press ENTER key to enter movie browse mode. Press direction keys to select movies and ENTER key to play. How MPEG4 Subtitles function: Put subtitle file and video file in the same folder, in the file library. First press SUB-T key to choose subtitle file, than choose video file, press enter key to play. Playing a DVD: The DVD file playing mode is almost the same as the DVD player.
5.8. Using it as a Storage Device a. If your computer is using an old operation system, a driver should be installed before being used for the first time for back-ups or accessing data. b. For the first usage, put power on Mediadisk LX Series and connect it to computer by a USB cable. The installation process will be initialized on the computer. Once finished, a green arrow will appear right below on the system tray. Now it can work as a storage device. 6.
7. FAQ (FREQUENTLY ASKED QUESTIONS) Q： When connecting the new device to the system, there is no disk icon but the green icon appears. A： It may because the device is not correctly formatted, so go ahead and format it. Q: The portable hard disk works fine under Windows 2000 / Windows XP operation system, but not with Windows 98 system. A：Please check the file format. Windows 98 is only compatible with Fat32 format. Please refer to instructions regarding partitions and formatting with Windows 98.
