Feel Design User Guide MEDIADISK NRX Series
USER GUIDE 1. SAFETY AND OTHER INSTRUCTIONS 1 2. REMOTE CONTROL 2 3. NETWORK BASED DATA SHARING WITH PC 4 4. MENU INTERFACE 8 5. BROWSER MENU 9 6. RECORDING FUNCTION 12 7. FILE COPY MENU 14 8. SETUP MENU 15 9. SPECIFICATIONS 19 10.
Mediadisk NRX Series is a Home Media Center, with a built-in 3.5“ HDD, can record and play media files (movies, audios and photos) through TV and when connected to PC, can also copy and play shared files via network. SAFETY AND OTHER INSTRUCTIONS Please use NRX carefully and read following instructions. >>> Copyright Software, audio, video or any intellectual properties are protected by copyright and international laws. It is user’s responsibility when reproducing or distributing content(s).
REMOTE CONTROL Function Buttons POWER on or off. Display media file information. In video and photo mode, press to view time, title or chapter. Select audio track. View Guide menu. Activate subtitles. Enter Timer Menu. Mute audio output. Record or resume when paused. Press repeatedly to set length: 30mins / 60mins / 90mins / 120mins / 180mins / 240mins / Off. Decrease volume. Increase volume. Press to confirm. Navigation buttons Change settings. Select option bar.
Button Function Function Button Jump to a specific point. Skip to next title. SLOW button: play in slow motion. Available levels: 3/4, 1/2, 1/4, 1/8, 1/16x Browse music, photo and movie files. Pause live TV and resume program Return to previous list in menu mode. from the point you left. Program is recorded in available space. Time Shift mode remains active until you press “Play” button. Begin playback. Press to repeat title. Zoom levels: Stop playback.
NETWORK BASED DATA SHARING WITH PC Network-based Data Sharing with PC After LAN cable is connected, according to your system environment, set up windows network as follows. To establish network communication between NRX and your computer, two requirements should be satisfied: 1) Folder sharing and security setup 2) Using same IP address band and Subnet Mask Data sharing Setup for Windows XP 1. Select folder you want to share and select “Sharing and security” with right mouse button. 2.
3. If folder is shared, you will see a hand mark on folder icon. Ex: My Movie 4. Go to “Control Panel –Administrative Tools –Computer Management –Local Users and Group” and among displayed items, double–click “Guest” item. WARNING! • Permission setting is only required for Windows XP Pro users. If you are an XP home user, go directly to step “6”. • If you cannot see “Administrative Tools”, click on “Switch to Classic view” on left corner.
5. After checking “User cannot change password” and “Password never expires”, keep the other checkboxes unchecked. 6. Go to “Control Panel—Network Connections”. Select “Local Area Connections”. Select “Properties” using right mouse button. WARNING ! • If you cannot see any “Network connections”, click on “Switch to Classic View” on the upper left corner • If there are more than two “Local Area Connections”, select the LAN card connected to NRX. 7.
WARNING! If your PC already has “Obtain IP address automatically” checked and IP automatically assigned from an Internet router or DHCP server, you may not need this setup. If you want a manual IP setup, please obtain an available IP address and subnet mask from the router manufacturer or network administrator. If “Internet Connection Firewall” option is checked, cancel this option. For Windows Service Pack 2 in “Window Firewall” Section click on “Settings”. After selecting off, click on “ok”. 8.
MENU INTERFACE After a few seconds, the system will show guide menu. Selecting Browser It’s an explorer: browse movie, photo, and music files stored in USB, HDD, Network and Card Reader. Video In Select the input source to be recorded. Selecting Timer Rec Create, edit and delete recording schedule and view all schedule status and history. File Copy File Manager: Copy files with USB, HDD, Network and Card Reader from a media to another. Selecting Setup Change settings.
BROWSER MENU Browse and play music, photo and movie files stored in NRX or external USB device, card reader, Network or Playlist. Browsing All Select All in menu. Select folder(s) containing all files (Music ,Photo and Movie). Select file you want to view and it will be displayed. File Edit Menu Select file or folder, and display Edit.
Return Select to go to main screen. Rename To rename file: 1. Select Rename from menu bar. 2. Name entry screen appears. Delete 3. Use navigation arrows to select letters and numbers. Select CAPS to toggle between uppercase and lowercase letters. 4. Once you have entered new name, select OK to confirm all changes. If you want to cancel changing name, press Return To delete title: 1. Select Delete from menu. 2. Confirm and delete file. 3. A confirmation message appears. 4.
Browse Music Select folder containing your audio files. A thumbnail strip will appear at the screen bottom, with song information. NRX supports Mp3, WMA, AAC, OGG format. Browse Photos Select folder containing photo files. Select photo you want to view and it will be displayed full screen. Note: 1. When photo is displayed in full screen mode, slide show starts automatically. 2. While listening to MP3 files, you can browse photos at the same time.
RECORDING FUNCTION Video in Select to record directly from AV in. System will create “My Recordings” folder at HDD or USB device. Your recorded file will be saved at this folder. File name will be named according to system time. Timer REC Plan recording schedules, view status and history. Create a New Schedule Select Edit from menu. Select Add a New Schedule and confirm. Adjust settings according to: Source Video / YCbCr Start Time Enter recording date and time.
Edit Schedules Select schedule you want to edit from list. Modify schedule as described in “Create a New Schedule” on previous page. Delete Schedules Select the schedule you want to delete and confirm one, all or cancel. View Schedule Status Schedule list is displayed. Enable Timer according to your needs: by User or stand by. View Recording History View complete history of all recordings set.
FILE COPY MENU Copy files from Hard Disk, NET, USB or Card Reader from a media to another. Select File Copy from Guide menu or select COPY on remote control. Step 1. Select Source Device Select device your want to copy in Source sector. Step 2. Select Destination Device Select Destination device in right part. Step 3. Select copy files or folders At Source sector, select files or folders you want to copy. A mention will be displayed aside name side. Step 4.
SETUP MENU Configure video, record and system settings. Photo Settings Slide Show Timing Set slide show time. Select OFF or interval you require.
HDMI Settings Change your TV-set to HDMI output to be displayed on your TV screen. Record Settings Quality Select to set default recording quality setting. The highest quality is HQ and requires more storage space. Other settings reduce recording quality and require less storage space. Permanent Timeshift Select to set Permanent Timeshift on or off. REC Device Choose device (hard drive or USB) to be recorded. Timeshift Device Choose device (hard drive or USB) to be used for Timeshift.
System Settings Select System from menu. Menu Language Choose OSD (On Screen Display) language. Text encoding Choose the text encoding language. Time Select to set system time. Enter Manual setup Enter system menu: select field and adjust settings.
HDD format Warning: Make sure you made a backup of your datas before formatting as it will erase all datas. Partitionning Step 1: Adjust Fat32, NTFS partition and capacity according to your needs. Step 2: Press “Format” to start. Select cancel to return to previous page. Restore default Select to restore factory default. WARNING: Your personal settings will be cancelled.
SPECIFICATIONS CONTENT FORMAT SUPPORTED: Video: AVI / MPG / MPEG / MP4 / DAT / VOB Photos: JPEG / JPG Maximum pictures recognizable: 9999 files Audio: MP3 / WAV / WMA / ACC / OGG Maximum files recognizable: 9999 files Compression rate: between 32 kbps and 320 kbps RECORDABLE MEDIA SUPPORTED: Built in HDD Built in USB VIDEO RECORDING MODE Mode HQ SP LP EP SLP DVD 1hr 2hrs 3hrs 4hrs 6hrs 320 GB HDD 64hrs 128hrs 192hrs 256hrs 384hrs 500 GB HDD 100hrs 200hrs 300hrs 400hrs 600hrs 750 GBHDD 150hrs 300hrs 450h
CONNECTIONS Video Input RCA Connector (yellow) x 1 Audio L/R Input RCA Connector (white/red) x 1 IEEE 1394 Input Mini Jack x 1 USB USB Port x 1 HDD Atapi port x 1 Video Output RCA Connector (yellow) x 1 Audio L/R RCA Connector (white/red) x 1 Video Input RCA Connector (yellow) x 1 Audio L/R RCA Connector (white/red) x 1 S-Video Input 4-pin Component / Progressive YPbPr GENERAL Power Supply AC 100~240V - 50~60Hz Power Approx.
TROUBLESHOOTING For detailed troubleshooting information, please visit www.memup.com and consult FAQ 1. When power is on, nothing appears or screen is shaking: Video output mode is not properly set, press [TV SYSTEM] on remote control to change output mode until it is properly set. 2. While playing movie file, subtitle is not shown. Make sure movie file name matches to subtitle file name. 3. While playing movie, there is no audio output. In SETUP menu, check if audio output mode is properly set.
