User manual


- 5 -
HDMI Cable Connection (Optional)
- Connect DNX and your TV using an HDMI Video/Audio cable.
- Select 'HDMI' as video input on your TV.
Press the 'TV-OUT' button on DNX Remote Control until image appears.
You can select display resolution (1080P, 1080i, 720P, 480P) in the AV setting.
Digital Audio - Cable Connection
2.6.1 Connection to a 5.1 CH receiver
If you use the DNX with a multi-channel decoder/amplifier with optical/coaxial input
If there is no sound after connection the optical cable, you have to change the A/V setup
into Digital via the SETUP menu.
LAN CONNECTION
Direct connection
Connect a LAN cable directly to the LAN ports of the DNX and a PC.
LAN cable should be cross cable type.