User guide

- 13 -
Some of the parameters set will be displayed in SETTING LIST.
Press [RETURN] on remote control, you’ll see the IP address of the communication. The green scale on
right side shows the signal strength.
Go to BROWSER into the NET, you’ll see MY_SHORTCUTS, MY_NEIGHBORS and another folder that
indicates the success of wireless network settings.
Set the product name in wireless network as wireless SSID. Set the IP address host, as long as the IP
addresses do not conflict with the USB wireless adapter IP addresses.
Save Settings and test. If successful, the information network interface will be shown, you can see the
automatic access to the parameters.
Into the main interface of "NETWORK", select MY_SHORTCUTS or MY_NEIGHBORS. The operation is
same as the wired network settings. Please refer to the Wired Lan Setup for more details.