User guide


- 8 -
2. NETWORK BASED DATA SHARING WITH PC
 LAN Cable connection between TWX and PC 
2.1 Connection to PC
Use cross or direct cable.
2.2 HUB Connection
For hub or internet router connection, use direct cable.
Note: To be connected to TWX, computer should be equipped with a 10/100Mbps LAN card.
Whether cross or direct LAN cable can be used for this connection.
 Network-based Data Sharing with PC 
After LAN cable is connected, according to your system environment, set up windows network as
follows.
To establish network communication between TWX and your computer, two requirements should be
satisfied:
1) Folder sharing and security setup
2) Using same IP address band and Subnet Mask