Operation Manual

- 10 -
COMPUTER CONNECTION
Add some files: Video, Photos, Audio, Documents or applications into the SlidePad by connecting it to your
computer through the delivered USB cable.
Connection
Connect the SlidePad to a computer to transfer files.
1. Connect your SlidePad to the computer. With the included USB cable:
- Plug the small end of the cable into the USB 2.0 Hi- speed connector of the SlidePad.
- Plug the large end of the cable into an available USB 2.0 Hi-speed port on the computer.
2. When your SlidePad is connected, a USB icon will appear in the Notification bar.
Drag the Notification bar down to open the notification panel.
3. Mount the storage drive.
- Touch USB connected (Internal) to mount the SlidePad’s built-in storage, then touch Mount
when prompted to confirm. When mounted, you can copy files to/from your computer to it.
- If a memory card is installed, touch USB connected (External) to mount the card, then touch
Mount when prompted to confirm. When mounted, you can copy files to/from the computer to it.
Your SlidePad will be recognized by the computer as a Removable Storage drive. Drag and drop files
between your SlidePad and the computer.
Transfer files
To transfer files, open the explorer and drag and drop files from a device to another.
Once finished, remove the USB device safely by clicking the USB icon to stop it and then pull out the USB
cable.
Note:
Please don’t power off when SlidePad is reading and writing.