Operation Manual

- 14 -
When Wifi is on, the SlidePad will seek network and display a list of available Wifi networks.
Note:
If a network that you have connected to previously is found, the SlidePad will connect to it.
If you don’t see your network in the list, you can force the SlidePad to re-scan. To scan for networks, tap
the Menu key, and then touch Scan.
2. Select an available Wifi network to connect to:
In the same Wifi settings menu above, touch a network in the list.
If the network is open, the SlidePad will prompt you to confirm connection to the network. Touch Connect to
confirm.
If the network is secured (as indicated by a Lock icon), the SlidePad will prompt you to enter a password.
Touch the Wireless password box to show the on-screen keyboard and then use it to enter the password.
Touch Connect to confirm.
When you have successfully connected to a Wifi network, the Notifications bar at the top of the screen will
show a Wifi signal indicator.
Note:
To learn about how to add a Wifi network when it is not in range or when the router is set to obscure the
network name (SSID); or to configure advanced Wifi options, please refer to the manual.