Installation Instructions

14
2" (5,1 cm)
PARTS REQUIRED:
3/8 x 46-1/8 x 72"
(1 x 117,2 x 182,9 cm)
46-1/8"
(117,2 cm)
1-1/2"
(3,8 cm)
3/4"
(1,9 cm)
3/4"
(1,9 cm)
x2
x90
SIDE WALL PANELS
BEGIN HERE
6" (15,1 cm)
12" (30,2 cm)
For squareness maintain 3/4" and 1-1/2"
measurement along stud.
Fig. A
Fig. B
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
Use RK as gauge block.
Flush
2 Nails
Place the 46-1/8 x 72" panel onto wall frame with primed side up as shown.
Ensure a 3/4" measurement along the wall stud and locate the panel to 1-1/2" above side
wall frame. Secure panel with two 2" nails in the corners (Fig. A).
5
4
3
Nail the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Ensure your wall frame is square by installing one panel and squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-
side until you have a 3/4" measurement on the wall stud. Secure corner with two 2" nails (Fig. B).
Primed Side
UP
2 x 3 x 13" (5,1 x 7,6 x 33 cm)
x1
RK
TEMPORARY SPACER