Installation Instructions

DOOR TRIM
PARTS REQUIRED:
2" (5,1 cm)
x10
x1
OO
2 x 3 x 69" (5,1 x 7,6 x 175,3 cm)
x2
3/8 x 1-3/4 x 71" (1 x 4,4 x 180,3 cm)
42
Remove temporary support
after wall is installed.
6
7
8
Place OO 1" (2,5 cm) from side opposite of hinge. Center between  oor and over-
door header. Secure using  ve 2" (5,1 cm) screws from outside of door (Fig. B).
Place batten  ush to front of studs and center between  oor and over-door
header (Fig. C,D). Secure using  ve 3/4" (1,9 cm) screws.
Reinforce door with 3/4" (1,9 cm) screws.
3/4" (1,9 cm)
x24
OUTSIDE
OF SHED
2" (5,1 cm)
x5
2"
(5,1 cm)
x10
3/4"
(1,9 cm)
x5
3/4"
(1,9 cm)
x5
3/4"
(1,9 cm)
x5
3/4"
(1,9 cm)
x5
OO
OO
Batten
Batten
BattenBatten
Flush
Flush
Center OO,
2 x 3 x 69"
between Á oor
and
over-door
header.
Center battens
between Á oor
and
over-door
header.
HINGE SIDE
Inside of Door
Reinforce door with
3/4" screws from inside.
1" (2,5 cm)
Approx.
3/4"
(1,9 cm)
Fig. A
Fig. B Fig. DFig. C
5
Remove temporary support (Fig. A).