Installation Instructions
1
2
5
6
3
4
4”
STEP 1 STEP 2
String line fence area and
mark for post location
Dig post holes and cement
posts into the ground
Run a string line along fence area. Use a measuring wheel
to determine perimeter measurements. Mark 8’ on center for
posts. If placing a gate, mark the location.
Check code and frost line considerations for depth
requirements. Drill holes with a power auger or use a post-
hole digger. Add 3 to 4 inches of gravel in each hole for
proper drainage. Allow for proper drying & curing time.
Follow concrete manufacturers instructions.
Property lines should be confirmed and marked. Find out about local regulations,
zoning restrictions or permits that may be required. Check your neighborhood
covenants or deed restrictions regarding fences. Have all utilities marked. Dial 811.
Concrete
Gravel
Stakes
String line
Horizontal
Picket Fence Installation Guide
8ft