Installation Instructions

FOR MORE EASY HOW-TO PROJECTS, VISIT MENARDS.COM
®
Measure the length of the Hickory Drawer Pull handles with
a tape measurer. On each end of the main board, make a
mark where each end of the draw handles will be drilled in.
Careful not to damage the paint, pre-drill holes where the
drawer handles will be attached with a 3/16” drill bit.
STEP 14: pre-drill
Using a screw driver and screws, attach both of the drawer
handles so that the handles are facing upward.
STEP 15: screw on handles
STEP 13: Mark for Drilling