Installation Instructions

2’ x 2’

Birch Plywood

Board

Sandpaper

Measuring Tape Pencil Ruler

SHOPPING LIST

Paint Brush

Wood Glue Stain

Clamp

Polyurethane

6-1/2” Track Saw 1-1/2” Hole Saw

Tool LIST

Create an organized space to store coffee pods as well as a

cute decoration for your kitchen with this project! Digging

through a drawer of loose K-Cups

or shing one out of a

box every morning is time consuming and frustrating, but

this coffee holder promises to leave that frustration behind.

With its easy-to-follow instructions, this is a project that

both beginner and expert DIY-ers can complete and are

sure to enjoy.

K cup

Coffee Holder

PAGE 1
K cup Coffee Holder Create an organized space to store coffee pods as well as a cute decoration for your kitchen with this project! Digging through a drawer of loose K-Cups® or fishing one out of a box every morning is time consuming and frustrating, but this coffee holder promises to leave that frustration behind. With its easy-to-follow instructions, this is a project that both beginner and expert DIY-ers can complete and are sure to enjoy.
PAGE 2
STEP 1: First Measurements & Cuts On a 2’ x 2’ board, measure and mark a 12" width before cutting the line with a track saw. Afterwards, take the cut piece and measure 14" before cutting again to create a 12" x 14" piece. STEP 2: Cutting On the base board that was cut to a 12" width, mark and measure another 3". Then set the track saw to 12° before cutting to create a 12" by 3" piece with one long, angled edge. STEP 3: Marking K-Cup® Holes On the 12" x 14" board, make a mark at 2-1/4" along the 12" side.
PAGE 3
STEP 6: Gluing Glue along the angled side of the 3" wood strip with wood glue before attaching it to the side of the 14" piece. Make sure to clamp the pieces together while waiting for the glue to dry. STEP 7: Apply Stain Next, apply stain to both of the boards, wiping away an excess before letting it dry. Once dry, apply 2-3 coats of polyurethane and let dry.
PAGE 4
FOR MORE EASY HOW-TO PROJECTS, VISIT MENARDS.