Instructions / Assembly

MENDOCINO PERGOLA INSTALLATION INSTRUCTIONS

Wood Materials

 4 - 6x6x8 posts

 2 – 3x12x8 Header Beams

 11 - 2x6x8 Stringers

Hardware

 4 – SI ABU66 Post Bases

 4 – SI Wedge All 5/8” x 4 ½”

 8 – BS ¾” x 12 Machine Bolt Grade 2 Galvanized

 8 – BS ¾” Galvanized Hex Nut

 16 – BS ¾” Galvanized Malleable Washer #2

 65 – 4 ½” Headlok Screws

Tools

 level

 socket set

 screwdriver

 drill

 hammer

 ladder

PAGE 1
MENDOCINO PERGOLA INSTALLATION INSTRUCTIONS Wood Materials  4 - 6x6x8 posts  2 – 3x12x8 Header Beams  11 - 2x6x8 Stringers Hardware  4 – SI ABU66 Post Bases  4 – SI Wedge All 5/8” x 4 ½”  8 – BS ¾” x 12 Machine Bolt Grade 2 Galvanized  8 – BS ¾” Galvanized Hex Nut  16 – BS ¾” Galvanized Malleable Washer #2  65 – 4 ½” Headlok Screws Tools  level  socket set  screwdriver  drill  hammer  ladder
PAGE 2
Step 1: Select Site, Set Posts Select the site for the pergola and mark the placement of the four posts. Attach the SI ABU66 Post Bases to your concrete patio. Insert 6x6 posts into the holes. Ensure the posts are level and plumb. Attach temporary 2x4 bracing to hold in place. Secure the posts to the bases using 4 ½” Headlok Screws. Step 2: Attach Header Beams Attach the Notched Header Beams to the outside of the 6x6 Posts using the supplied hardware. The Notches should be facing inward.