Operating instructions

FLUE VENTING REQUIREMENTS

NOTE: FOR LP GAS & HIGH ALTITUDE, SEE PG. 13

MAX

Figure 6: DXV42 Vertical & Horizontal Flex Vent Requirements when using Natural Gas

NOTE

: ONE 12” SECTION OF VERTICAL PIPE AND ONE 90

ELBOW CAN BE USED IF NO HORIZONTAL VENT

SECTIONS GREATER THAN 7” ARE USED.

ALL OTHER INSTALLATIONS MUST FALL WITHIN

ABOVE SHADED AREA.

NOTE: THE SHORTEST HORIZONTAL RUN OF 7”/6” ARE ACHIEVED USING EITHER THE 6” DURAVENT PIPE

OR THE AMERIVENT 7” PIPE. EITHER CAN BE USED AS THE MAXIMUM HORIZONTAL RUN.

NOTE: FOR LP GAS & HIGH ALTITUDE INSTALLATIONS, SEE PG. 13