Operating instructions

COAL BED AND LOGS INSTALLATION

With door removed, proceed as follows:

Carefully unpack the shipping boxes containing the coal bed sections and logs and remove them gently from the

foam packing.

Note: Each coal bed and log is ”lettered” on its underside.

1. Locate the 3 bags of embers and coals:

LARGE CHUNK COALS - SMALL COALS - GLOWING EMBERS

2. Place Coal Bed “A” between front burner and middle burner – to right of pilot. Front Edge of Coal Bed

“A” should sit below the Front Burner Tube. Lift Front Burner Tube Up and Slide Coal Bed under Burner

Tube.

3. Fill area between fireplace opening and front burner with GLOWING EMBERS. The embers should be

piled up to the top of the front burner.