Operating instructions

19 | P a g e
Grace Front Only: The Grace Front’s inner edges start outside the convection air gaps around the viewing glass frame.
This Front is mounted using steel spacers and screws on the outer sides of the convection air gap on the sides of the
viewing glass frame. The bracket attached to the Grace Frame allows you to pull the Grace outward in incremental steps
up to 2”, maximum. The Grace Front can be mounted close to the steel face of this fireplace if the Outer Guides are used
and are applicable in the installation plan. Else, if Final Finishing material is desired behind the Grace Front, use the Inner
Guides and adjust the rough framing depth and the Outer Adjustable Framing Brackets. With Final Finishing Material
mounted behind the Grace by using the inner guides, the Grace can be mounted only as close as the Final Finishing Ma-
terial thickness allows.
The Grace Decorative Front comes standard with an integrated Glass Safety Barrier Screen.
Grace Front with a Traditions Front or Willowbrook Front combination:
A Traditions or Willowbrook Front can be mounted along with a Grace Front. First determine the desired depth perspec-
tive. Do you want the Grace Front Face close to the Traditions Face or Willowbrook Face? Do you want the Final Finish-
ing Material behind the Grace Front or do you wish to use the Outside Guides which hold the Final Finishing Material
outside the outer perimeter of the Grace Front?
GRACE WITH
TRADITIONS
GRACE
ONLY