Operating instructions

24 | P a g e
BACKUP DC POWER INLET PORT INSTALLATION
Under normal conditions when AC power is available, this appliance is designed to operate on 110 VAC power. During
power outages, it is designed to operate using 6 V DC backup power. This appliance is supplied with a DC power inlet
harness, a single gang outlet box and two single cover plates. In addition, a 4 X AA size battery pack and a connector
harness is also supplied.
INSTALLATION: It is important that you install the supplied harness, outlet box and cover plate on the left side of this ap-
pliance. The DC Power Inlet harness is 6 feet long, allowing installation of the single gang box up to 4 feet to the left of
this appliance. Install the single gang box at a maximum height of 18” to the center of the box or match the mounting
height of this single gang box with the height of other AC outlets that are installed in the same room as this appliance.
WARNING: DO NOT STAPLE the 6’ DC Power Inlet Harness to the wall studs.
COVER PLATES: Two cover plates are supplied and are White and Beige in color. If the home décor requires a different
color other than the two supplied colors, obtain one from a local hardware store. Make certain that the cover you obtain is
exactly the same dimensions as the ones supplied with this fireplace.
DECAL INSTALLATION: A notification decal (label) is supplied with this fireplace that aids in identifying the DC Power
Inlet. Attach this label to cover plate once installation is complete and verified.
INSTRUCT HOMEOWNER: Demonstrate to the
homeowner how to attach the backup DC power
pack during power outages. Instruct homeowner
to retain the DC battery pack and the connecting
harness in a safe and secure place for use dur-
ing power outages.
ATTACH DECAL
TO COVER PLATE.
DEMONSTRATE TO HOMEOWNER
HOW TO CONNECT BACKUP
BATTERY PACK TO DC POWER INLET.