Operating instructions

46 | P a g e
BEFORE YOU BEGIN
Read this entire manual before you use your new fireplace (especially the section “Safety Precautions” on page 2). Fail-
ure to follow the instructions may result in property damage, bodily injury, or even death.
Remote Control Transmitter Functions
NOTE: The Wall Receiver will “beep” once every time
a Remote Transmitter Key is pressed, signaling that
the command has been received.
Identify the four function buttons on the Remote
Transmitter:
ON/OFF KEY: This button turns the sys-
tem ON or OFF. When this button is
pressed and the system is OFF, the pilot
light will stay ON if the “Standing Pilot
Switch” is in the ON position.
THERMOSTAT KEY: This button, when
pressed after the ON/OFF KEY is pressed and the system is ON, will allow the selection of three modes:
Manual Operation, Normal Thermostat and Smart Thermostat.
Manual Mode: In this mode, the room tempera-
ture is ignored and the fireplace can be turned
ON indefinitely. The room temperature rise has no effect on
this mode. All other functions such as fan speed control,
flame height control, secondary burner On/OFF control and
Accent Light ON/OFF controls will be manually controllable.
Normal Thermostat: In this mode, the fireplace will stay
functioning until the room temperature increases 1
o
F above
the Set Point Temperature. To increase the Set Point Tem-
perature, Press the UP button until the desired temperature is
displayed in the SET POINT TEMPERATURE window. The
fan will turn on 5 minutes after fireplace startup and will turn off
12-1/2 minutes after the flames turn off, in this mode. The
flame height can be adjusted while the fireplace is function-
ing, fan speed can be adjusted after 5 minutes of startup.
Secondary burner can be turned On or Off at any time after
startup. The Accent Light can be turned on or off any time
after startup.
Smart Thermostat: In this mode, all other functions except the flame height adjustment are allowed. Manual flame height
adjustment is not allowed in this mode. The Smart Thermostat function adjusts the flame height in accordance to the dif-
ference between the set point temperature and the actual room temperature. As the room temperature gets closer to the
set point temperature, the Smart Function automatically modulates the flame down.
UP/DOWN KEY: This key is used to increase or decrease the Set Point Temperatures, Flame Height and Fan Speed and
to toggle between Accent Light ON/OFF and Secondary Burner ON/OFF.
MODE SELECTION KEY: This key is used to toggle between the various function icons : Flame Height, Fan Speed, Ac-
cent Light and Secondary Burner.
S M A R T
ON
O F F
S M A R T
M O D E
N O R M A L
T H E R M O S T A T
M A N U A L
M O D E
68
Hi
M A XM A X
Hi
O F F
76°
F F
76°
ON S M A RT
76°
F