Operating instructions

54 | P a g e
NATURAL TO LP GAS CONVERSION
Kit # HA-90-00110 for Mendota Model ML47
Caution: The electrical supply to the fireplace must be turned off prior to performing the conversion. The gas supply
must be shut off prior to disconnecting the electrical power.
ORIFICE SIZES REQUIREMENT:
A Natural Gas to LPG conversion kit #HA-90-00110 must be installed to convert the ML47 Fireplace to burn LPG.
LP Conversion Kit #HA90-00110 contains the following parts: One Motorized LP Pressure Regulator and one Cap Orific-
es drill #49.
Recommended Procedure To Convert This Fireplace To Burn LPG
This fireplace arrives from the factory ready to burn Natural Gas. If you intend to burn LPG, it is highly recommended that
you convert this fireplace and its Pressure Regulator, Pilot Orifice Slider Tab and Burner Orifice prior to placing this fire-
place in its framed cavity.
See diagrams, on this page, and follow instructions to prepare this fireplace for conversion to LPG.
Remove the Burner by removing 2 screws in front of burner that secure burner weldment to firebox floor.
Remove front bottom cover plates below glass frame.
Identify the Pilot Light Hood, Main Burner Orifice and the Valve Pressure Regulator.
This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer’s instructions
and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions
is not followed exactly, a fire, explosion or production of carbon monoxide may result causing property damage, per-
sonal injury or loss of life. The qualified service agency is responsible for the proper installation of this kit. The in-
stallation is not proper and complete until the operation of the converted appliance is checked as specified in the
owner instructions supplied with the kit.
Cet équipement de conversion sera installé par une agence qualifiée de service conformément aux instructions du
fabricant et toutes exigences et codes applicables de l'autorisés avoir la juridiction. Si l'information dans cette In-
struction n'est pas suivie exactement, un feu, explosion ou production de protoxyde de carbone peut résulter le
dommages causer de propriété, perte ou blessure personnelle de vie. L'agence qualifiée de service est esponsable
de l'installation propre de cet équipement. L'installation n'est pas propre et complète jusqu'à l'opération de l'appareil
converti est chèque suivant les critères établis dans les instructions de propriétaire provisionnées avec l'équipement.