Material Safety Data Sheet

Page 3/7
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/13/2015 Reviewed on 10/13/2015
Trade name:
Super Finish 3500
(Contd. of page 2)
41.2.6
·
Specific end use(s)
No further relevant information available.
8 Exposure controls/personal protection
·
Additional information about design of technical systems:
No further data; see item 7.
·
Control parameters
·
Components with limit values that require monitoring at the workplace:
1344-28-1 aluminium oxide
PEL Long-term value: 15*; 15** mg/m³
*Total dust; ** Respirable fraction
REL Long-term value: 10* 5** mg/m³
*Total dust **Respirable fraction
TLV Long-term value: 1* mg/m³
as Al; *as respirable fraction
8042-47-5 White mineral oil (petroleum)
TWA Long-term value: 5 mg/m³
·
Additional information:
The lists that were valid during the creation were used as basis.
·
Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
·
Breathing equipment:
Not necessary if room is well-ventilated.
·
Protection of hands:
Protective gloves are recommended.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
·
Eye protection:
Safety glasses
·
Body protection:
Protective work clothing
*
9 Physical and chemical properties
·
Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Viscous
Color:
Grey
·
Odor:
Characteristic
·
Odour threshold:
Not determined.
·
pH-value at 20 °C (68 °F):
> 7
(Contd. on page 4)
US