Operation Instructions PP038656EAA Lift Chair ~1~
ELECTRIC LIFTING & RECLINING Operation Instructions Plug the direct current end of the cord into the AC Adapter outlet, then insert the AC adapter plug into a wall outlet for power. Press the button Press the button to recline the chair back and foot-rest. to return the chair back and foot-rest to their original position. Push the button Press the button a second time to lift the entire chair. to lower the chair and return it to the original position.
PRODUC TFEATURES Power Reclining Power Lifting IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including: Always unplug the lift chair from the power source after use, and before cleaning. Do not touch lift chair if large amounts of liquid have spilled on it. Unplug immediately. The chair should never be left unattended when plugged in.
HEALTH CAUTION If you have any concerns regarding to your health, consult your doctor before using this product. Individuals with pacemakers should not use this product. If you have pain in a muscle or joint after using for a prolonged period of time, discontinue using and consult your doctor. Persist pain could be a symptom of a more serious condition. MAINTAINANCE INSTRUCTIONS TO STORE: Place unit in its box or safety dry and cool place.
OPERATING INSTRUCTION Press the Press the button to make the sofa lifted. button to recline the sofa.
Assembly Instructions GENERAL ASSEMBLY INFORMATION GUIDE 1. 2. 3. 4. Please read the following instructions prior to assembling this product: To avoid damage, assemble this product on a non-abrasive surface such as carpet. Make sure all bolts are tightly fastened before use. For home use or light commercial use only. Please make sure you have all parts before assembly.
Parts List A B QTY 1 pc C QTY 1pc D QTY 1 pc ~7~ QTY 1 pc
Step 1 1 Place the Seat (B) on its back on a flat smooth surface. Take out the bag which holds a rectangle box. 2 Take out the transformer (C 1pc) &weir plug (D 1pc) from the rectangle carton box.
Step 2 Attach backrest (A) to main frame (B) by aligning the metal grooves on backrest to brackets on the main frame as shown. Ensure the backrest (A) slides down fully over the brackets on the main frame (A).
Step 3 1 Attach the transformer (C) to the plug on the back of seat (A). 2 Connect the transformer (C) with the wire plug (D) and insert the wire plug into a wall outlet for power.
Warnings Sit down in the chair gently. To avoid tipping over, do not throw yourself into the chair. Move the chair into the reclining position slowly, making sure that no children or pets are in close proximity. Do not allow children to play on or around the chair, particularly when it is in an open position. Close the recliner completely before getting out of it. Never sit on the footrest when it is open, even if it is a child.
How to Disassemble Please find a strong tool to prod the small piece of metal grooves, then the backrest will be pulled out. The tool is not included.
