Operator`s manual

98
Controls in detail
Seats
Installing rear seat head restraints
왘 Insert head restraint and push it down
to the stop.
왘 Push release button 1 and adjust
head restraint to the desired position
(
컄 page 37).
Stowing rear center head restraint
1 Rear center head restraint
2 Bar
3 Clip
왘 Remove rear center head restraint
(
컄 page 97).
왘 If necessary, remove cargo floor plates,
see “Removing cargo floor plates”
(
컄 page 165).
왘 Slide rear seats forward, see “Adjusting
rear seat fore and aft” (
컄 page 100).
왘 Fold rear seat backrests down, see
“Folding down the backrest”
(
컄 page 100).
왘 From cargo compartment, attach rear
center head restraint 1 to underside
of rear center seat.
Make sure front side of head
restraint 1 is facing upward.
왘 Press bar 2 on both sides into
clips 3.
Heated seats*
Both switches for the front seats are loca-
ted in the center console.
1 Normal heating
2 Rapid heating
왘 Start the engine.
Switching on seat heating
왘 Press upper switch position 1.
A red indicator lamp on the switch
lights up.