J_A208.book Seite 1 Donnerstag, 31.
J_A208.book Seite 2 Donnerstag, 31.
J_A208.book Seite 3 Donnerstag, 31. Mai 2001 9:35 09 Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Further, it exemplifies your desire to own an automobile that will be as easy as possible to operate and provide years of service. Your Mercedes-Benz represents the efforts of many skilled engineers and craftsmen.
J_A208.book Seite 1 Donnerstag, 31. Mai 2001 9:35 09 Introduction Product information .......................... 7 Operator’s manual ............................. 8 Where to find it ................................ 13 Reporting Safety Defects ................ 15 Instruments and controls Instruments and controls ............... 18 Center console ..............................20 Overhead control panel ............... 21 Operation Vehicle keys ......................................24 Start lock-out ........
J_A208.book Seite 2 Donnerstag, 31. Mai 2001 9:35 09 Contents 2 Multifunction steering wheel, multifunction display .................88 Trip and main odometer and sub menu ..............................92 Audio systems ..................................93 Radio ..............................................93 CD player .......................................94 Cassette player .............................95 Telephone ..........................................96 Telephone book ............................
J_A208.book Seite 3 Donnerstag, 31. Mai 2001 9:35 09 Automatic transmission ............... 195 Parking brake .................................204 Driving instructions ......................205 Drive sensibly – save fuel .......................................205 Drinking and driving .................205 Pedals ...........................................205 Power assistance ........................206 Brakes ..........................................206 Driving off ...................................
J_A208.book Seite 4 Donnerstag, 31. Mai 2001 9:35 09 Contents 4 ENGINE FAN ...............................239 COOLANT (coolant level) ..........240 COOLANT TEMP. (coolant temperature) ................ 241 LIGHTING SYSTEM ....................242 LIGHT SENSOR ...........................243 STEER. WHEEL ADJUST. ...........243 ENGINE OIL LEVEL ...................244 ELEC. STABIL. PROG. (Electronic stability program) ......................................245 REMOVE KEY .............................
J_A208.book Seite 5 Donnerstag, 31. Mai 2001 9:35 09 Wiper blade .................................305 Light alloy wheels ......................305 Instrument cluster .....................306 Steering wheel and gear selector lever ......................306 Cup holder ...................................306 Seat belts .....................................306 Headliner .....................................306 Upholstery ...................................307 Hard plastic trim items .............
J_A208.book Seite 6 Donnerstag, 31.
J_A208.book Seite 7 Donnerstag, 31. Mai 2001 9:35 09 Product information Kindly observe the following in your own best interest: We recommend using Mercedes-Benz original parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and their special suitability for Mercedes-Benz vehicles.
J_A208.book Seite 8 Donnerstag, 31. Mai 2001 9:35 09 Introduction 8 Operator’s manual This Operator’s Manual contains a great deal of useful information. We urge you to read it carefully and familiarize yourself with the vehicle before driving. For your own safety and longer service life of the vehicle, we urge you to follow the instructions and warnings contained in this manual. Ignoring them could result in damage to the vehicle or personal injury to you or others.
J_A208.book Seite 9 Donnerstag, 31. Mai 2001 9:35 09 Important notice for California retail buyers of Mercedes-Benz automobiles Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price or lease price, if Mercedes-Benz USA, LLC and/or its authorized repair or service facilities fail to fix one ore more substantial defects or malfunctions in the vehicle that are covered by its express warranty after a reasonable number of repair attempts.
J_A208.book Seite 10 Donnerstag, 31. Mai 2001 9:35 09 Introduction 10 Roadside assistance The Mercedes-Benz Roadside Assistance Program provides factory trained technical help in the event of a breakdown. Calls to the toll-free Roadside Assistance number: 1-800-FOR-MERCedes (in the USA) 1-800-387-0100 (in Canada) will be answered by Mercedes-Benz Customer Assistance Representatives 24 hours a day, 365 days a year.
J_A208.book Seite 11 Donnerstag, 31. Mai 2001 9:35 09 Operating your vehicle outside the USA or Canada If you plan to operate your vehicle in foreign countries, please be aware that: • Service facilities or replacement parts may not be readily available, • unleaded gasoline for vehicles with catalytic converters may not be available; the use of leaded fuels will damage the catalysts, • gasoline may have a considerably lower octane rating, and improper fuel can cause engine damage.
J_A208.book Seite 12 Donnerstag, 31. Mai 2001 9:35 09 Introduction 12 We continuously strive to improve our product, and ask for your understanding that we reserve the right to make changes in design and equipment. Therefore, information, illustrations and descriptions in this Operator’s Manual might differ from your vehicle. Optional equipment is also described in this manual, including operating instructions wherever necessary.
J_A208.book Seite 13 Donnerstag, 31. Mai 2001 9:35 09 Where to find it The Operator’s Manual is divided into eight sections: • Instruments and controls: An overview of all the controls that can be operated from the driver’s seat. • Operation: Information on the vehicle’s equipment and its operation. • Driving: Important information on driving. • Instrument cluster display: Displays and indicator lamps on the instrument cluster with brief instructions.
J_A208.book Seite 14 Donnerstag, 31. Mai 2001 9:35 09 Introduction 14 Problems with your vehicle If you should experience a problem with your vehicle, particularly one that you believe may affect its safe operation, we urge you to immediately contact your authorized Mercedes-Benz Center to have the problem diagnosed and corrected if required.
J_A208.book Seite 15 Donnerstag, 31. Mai 2001 9:35 09 For the USA only: The following text is published as required of manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the “National Traffic and Motor Vehicle Safety Act of 1966”.
J_A208.book Seite 16 Donnerstag, 31.
J_A208.book Seite 17 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Instruments and controls ............... 18 Center console ..............................20 Overhead control panel ...............
J_A208.book Seite 18 Donnerstag, 31.
J_A208.book Seite 19 Donnerstag, 31. Mai 2001 9:35 09 For more detailed descriptions see Index on page 326. 13 Center air outlets, adjustable For adjustment of air outlets, refer to automatic climate control, see page 120.
J_A208.book Seite 20 Donnerstag, 31.
J_A208.book Seite 21 Donnerstag, 31. Mai 2001 9:35 09 Overhead control panel 1 Tele Aid (emergency call system), see page 182 2 Interior lighting, see page 149 1 3 Hands-free microphone for Tele Aid, telephone and voice recognition system.
J_A208.book Seite 22 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Contents – Operation Operation Vehicle keys ......................................24 Start lock-out ....................................26 General notes on the central locking system ...............26 Central locking system ...................27 Radio frequency and infrared remote control ..............................27 Opening and closing windows from outside ................. 31 Panic button ............
J_A208.book Seite 23 Donnerstag, 31. Mai 2001 9:35 09 Telephone ..........................................96 Telephone book ............................96 Redialing .......................................98 Incoming call .............................. 100 Navigation system .......................... 101 Trip computer ................................. 102 Malfunction/warning message memory ...................... 104 Individual settings ......................... 106 Setting the audio volume ..............
J_A208.book Seite 24 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 24 Vehicle keys Warning! Included with your vehicle are 2 electronic keys with integrated radio frequency and infrared remote controls plus removable mechanical key. When leaving the vehicle always remove the electronic key from the steering lock, and lock your vehicle.
J_A208.book Seite 25 Donnerstag, 31. Mai 2001 9:35 09 Electronic key When using the mechanical key (2) for lock operations, it can be removed by sliding it out of the remote control. To do so, move locking tab (3) to the right and slide the mechanical key (2) in direction of arrow (4). The remote control transmitter is located in the electronic key. 1 The infrared receivers are located in the door handles. Notes: Remove the mechanical key from the electronic key when using valet parking service.
J_A208.book Seite 26 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system Start lock-out Important! Removing the electronic key from the steering lock activates the start lock-out. The engine cannot be started. Inserting the electronic key in the steering lock deactivates the start lock-out. Note: In case the engine cannot be started (vehicle’s battery is in order), the system is not operational.
J_A208.book Seite 27 Donnerstag, 31. Mai 2001 9:35 09 Central locking system 4 Radio frequency and infrared remote control 3 The electronic key has an integrated radio frequency and infrared remote control. 2 1 Due to the extended operational range of the remote control, it could be possible to unintentionally lock or unlock the vehicle by pressing the transmit button. If one of the transmit buttons is pressed, the battery check lamp lights up briefly – indicating that the batteries are in order.
J_A208.book Seite 28 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 28 6 7 P80.30-2081-26 6 Infrared receiver in driver’s door handle P80.
J_A208.book Seite 29 Donnerstag, 31. Mai 2001 9:35 09 Locking and unlocking with remote control The presently active unlocking mode (selective or global) can only be determined by unlocking the vehicle with the remote control (see below for changing mode). Unlocking: Press transmit button Œ. All turn signal lamps blink once to indicate that the vehicle is unlocked.
J_A208.book Seite 30 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 30 Choosing global or selective mode on remote control Important! Press and hold transmit buttons ‹ and Œ simultaneously for approx. 6 seconds to reprogram the remote control. Battery check lamp will blink two times indicating the completed mode change.
J_A208.book Seite 31 Donnerstag, 31. Mai 2001 9:35 09 Opening and closing windows from outside Note: Aim transmitter eye of remote control at a door receiver. The windows begin to open after approx. 1 second.
J_A208.book Seite 32 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 32 Panic button Note: For operation in the USA only: This device complies with Part 15 of the FCC Rules.
J_A208.book Seite 33 Donnerstag, 31. Mai 2001 9:35 09 Doors 1 1 Opening – pull handle Important! 2 Unlocking driver’s door The mechanical key does not operate the central locking system or antitheft alarm system. 3 Locking driver’s door 4 Individual door from inside: When you lock the driver’s door with the mechanical key, the door lock button should move down. • Push lock button down to lock.
J_A208.book Seite 34 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system If the vehicle has previously been locked from the outside, opening a door from the inside will trigger the alarm. When opening a door while the central locking system is in the: • selective unlocking mode, only that individual door is unlocked.
J_A208.book Seite 35 Donnerstag, 31. Mai 2001 9:35 09 Central locking switch If the vehicle was previously locked with the central locking switch, while in the global remote control mode, the complete vehicle is unlocked when a door is opened from the inside. Notes: If the vehicle was previously locked with the remote control, the doors and trunk cannot be unlocked with the central locking switch.
J_A208.book Seite 36 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system Automatic central locking The central locking switch also operates the automatic central locking. With the automatic central locking system activated, the doors and trunk are locked at vehicle speeds of approx. 9 mph (15 km/h) or more. The fuel filler flap remains unlocked.
J_A208.book Seite 37 Donnerstag, 31. Mai 2001 9:35 09 Trunk When the trunk is separately locked, it remains locked when centrally unlocking the vehicle. To deny any unauthorized person access to the trunk, lock it separately with the mechanical key. Leave only the electronic key less its mechanical key with the vehicle. Notes: The mechanical key does not operate the central locking system or antitheft alarm system.
J_A208.book Seite 38 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 38 Notes: In case of a malfunction in the central locking system the trunk can be unlocked individually. To unlock and open the trunk lid, turn mechanical key to position 1, hold and push to open. If the fuel filler flap cannot be opened, see page 299.
J_A208.book Seite 39 Donnerstag, 31. Mai 2001 9:35 09 Trunk lamp If the trunk is to remain open for a long period of time, the trunk lamp can be switched off by pulling out the plunger in the switch (arrow). This prevents the vehicle battery from being discharged. When the trunk lid is closed, the switch will reset and turn on the lamp next time the lid is opened. P82.
J_A208.book Seite 40 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system Trunk lid release switch Practical hints Car care Technical data 40 A minimum height clearance of 5.9 ft. (1.8 m) is required to open the trunk lid. To open the trunk, the vehicle must be at standstill. Pull up on switch until trunk lid is open. The indicator lamp in the switch remains on with trunk lid open.
J_A208.book Seite 41 Donnerstag, 31. Mai 2001 9:35 09 Trunk lid emergency release (vehicles built prior to September 2001) Note: The emergency release button (1) only unlocks and opens the trunk while the vehicle is not in motion. Important! The emergency trunk lid release button (1) does not open the trunk lid, if the trunk has been locked using the mechanical key or if the vehicle battery is discharged or disconnected.
J_A208.book Seite 42 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 42 Trunk lid emergency release (vehicles built September 2001 and later) Important! The emergency trunk lid release button (1) does not open the trunk lid, if the vehicle battery is discharged or disconnected.
J_A208.book Seite 43 Donnerstag, 31. Mai 2001 9:35 09 Antitheft alarm system Operation: Once the alarm system has been armed, the exterior vehicle lamps will flash and an alarm will sound when someone: • opens a door, • opens the trunk, 1 • opens the hood, • attempts to raise the vehicle. The alarm will last approximately 3 minutes in form of flashing exterior lamps. At the same time an alarm will sound for 30 seconds.
J_A208.book Seite 44 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tow-away alarm Tow-away alarm Practical hints Car care Technical data 44 The alarm will last approximately 3 minutes in form of flashing exterior lamps. At the same time an alarm will sound for 30 seconds. The alarm will stay on even if the vehicle is immediately lowered.
J_A208.book Seite 45 Donnerstag, 31. Mai 2001 9:35 09 Power seats, front Warning! Warning! Do not adjust the driver’s seat while driving. Adjusting the seat while driving could cause the driver to lose control of the vehicle. When leaving the vehicle always remove the electronic key from the steering lock, and lock your vehicle. Never ride in a moving vehicle with the backrest reclined. Sitting in an excessively reclined position can be dangerous. You could slide under the seat belt in a collision.
J_A208.book Seite 46 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Instrument cluster display Driving Seats Practical hints Car care Technical data 46 safely. The position should be as far rearward as possible, consistent with ability to properly operate controls. 5 Note: 4 8 7 2 2 1 3 The slide switches are located in each door.
J_A208.book Seite 47 Donnerstag, 31. Mai 2001 9:35 09 Notes: Caution! Your vehicle is equipped with power head restraints, do not try to raise or lower them manually. Do not remove head restraints except when mounting seat covers. For removal see page 51. Whenever restraints have been removed be sure to reinstall them before driving. Only minor personal adjustments, as described below, should then be required.
J_A208.book Seite 48 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Seats Instrument cluster display Practical hints Car care Technical data 48 Memory storing and recalling Storing Three sets of seat/head restraint positions may be programmed into memory. Together with the driver’s seat position you can store the exterior rear view mirror positions.
J_A208.book Seite 49 Donnerstag, 31. Mai 2001 9:35 09 Recalling Synchronizing power seats and head restraints To recall a seat/head restraint and exterior rear view mirror position, push and hold position button “1”, “2” or “3” until seat/head restraint and exterior rear view mirror movement has stopped. The seat/head restraint and exterior rear view mirror movement stops when the position button is released.
J_A208.book Seite 50 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 50 Important! Warning! Prior to operating the vehicle, the driver should adjust the seat height for proper vision as well as fore/aft placement and backrest angle to insure adequate control, reach, operation, and comfort. The head restraint should also be adjusted for proper height.
J_A208.book Seite 51 Donnerstag, 31. Mai 2001 9:35 09 Front head restraints Warning! For your protection, drive only with properly positioned head restraints. Adjust head restraint to support the back of the head approximately at ear level. Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. Removal: Installation: Tilt the backrest rearward for easier removal of the front head restraints.
J_A208.book Seite 52 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 52 Roll bar and head restraints, rear Warning! The rear head restraints are integrated in the roll bar. Raising or lowering of the roll bar could injure rear seated occupants. The roll bar will be automatically raised in an accident or in a potentially dangerous driving situation.
J_A208.book Seite 53 Donnerstag, 31. Mai 2001 9:35 09 Switch for roll bar and head restraints, rear With the engine running and the roll bar lowered, the warning lamp in the roll bar switch will blink for approx. 15 seconds. The blinking is reminding you to raise the roll bar if the rear passenger seats are occupied. See also page 233 for roll bar warning lamp. 1 Important! The roll bar is intended to be a safety enhancement to the other features designed into the vehicle.
J_A208.book Seite 54 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 54 Backrest Notes: The automatic seat slide is provided with a safety feature. The automatic process is interrupted, if the backrest of the sliding seat is pushed against an occupant or object. The seat will slide forward, stop, and make 3 attempts sliding backward. To halt the automatic process, activate the power seat switch.
J_A208.book Seite 55 Donnerstag, 31. Mai 2001 9:35 09 Multicontour seat (optional; standard on model CLK 55 AMG) We recommend to adjust the multicontour seat in the following order: 1 Seat cushion depth Slide the switch fore or aft until your legs are supported comfortably. 2 Backrest bottom 4 3 Backrest center 1 2 4 Side bolster adjustment Adjust the side bolster to provide good lateral support.
J_A208.book Seite 56 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 56 Heated seats, front (optional, standard on model CLK 55 AMG) Press switch to turn on seat heater: 1 Normal seat heating mode. One indicator lamp in the switch lights up. 1 2 Rapid seat heating mode. Both indicator lamps in the switch light up.
J_A208.book Seite 57 Donnerstag, 31. Mai 2001 9:35 09 Notes: When in operation, the seat heater consumes a large amount of electrical power. It is not advisable to use the seat heater longer than necessary. The seat heaters may automatically switch off if too many power consumers are switched on at the same time, or if the battery charge is low. When this occurs, the indicator lamp in the switch will blink (both indicator lamps blink during rapid seat heating mode).
J_A208.book Seite 58 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Restraint systems Practical hints Car care Technical data 58 Seat belts and integrated restraint system Warning! Your vehicle is equipped with seat belts for all seats, emergency tensioning retractors for the front seat belts, dual front airbags, door mounted side impact airbags and knee bolsters for driver and front passenger.
J_A208.book Seite 59 Donnerstag, 31. Mai 2001 9:35 09 Warning! Warning! Never ride in a moving vehicle with the backrest reclined. Sitting in an excessively reclined position can be dangerous. You could slide under the seat belt in a collision. If you slide under it, the belt would apply force at the abdomen or neck. That could cause serious or even fatal injuries.
J_A208.book Seite 60 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Restraint systems Instrument cluster display Practical hints Car care Technical data 60 Fastening of seat belts Push latch plate (1) into buckle (2) until it clicks. Do not twist the belt. A twisted seat belt may cause injury. To help avoid severe or fatal injuries, the lap belt must be positioned as low as possible on your hips and not across the abdomen.
J_A208.book Seite 61 Donnerstag, 31. Mai 2001 9:35 09 Unfastening of seat belts 1 2 P91.40-2102-26 Push the release button (3) in the belt buckle (2). Allow the retractor to completely rewind the seat belt by guiding the latch plate (1). Tighten the lap portion to a snug fit by pulling shoulder portion up. The shoulder portion of the seat belt must be pulled snug and checked for snugness immediately after engaging it.
J_A208.book Seite 62 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Restraint systems Caution! For safety reasons, avoid adjusting the seat or backrest into positions which could affect the correct seat belt position. Warning! USE SEAT BELTS PROPERLY. • Seat belts can only work when used properly. Never wear seat belts in any other way than as described in this section, as that could result in serious injuries in case of an accident.
J_A208.book Seite 63 Donnerstag, 31. Mai 2001 9:35 09 • Pregnant women should also use a lapshoulder belt. The lap belt portion should be positioned as low as possible on the hips to avoid any possible pressure on the abdomen. According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions.
J_A208.book Seite 64 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Restraint systems Practical hints Car care Technical data 64 BabySmartTM airbag deactivation system TM Warning! Special BabySmart compatible child seats, designed for use with the Mercedes-Benz system and available at any authorized Mercedes-Benz Center are required for use with the BabySmartTM airbag deactivation system.
J_A208.book Seite 65 Donnerstag, 31. Mai 2001 9:35 09 Self-test BabySmartTM without special child seat installed Supplemental restraint system (SRS) Airbags are intended as a supplement to seat belts. Airbags alone cannot protect as well as airbags plus seat belts in impacts for which the airbags were designed to operate, and do not afford any protection whatsoever in crashes for which the airbags are not designed to deploy.
J_A208.book Seite 66 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Restraint systems Emergency tensioning retractor (ETR) The seat belts for the front seats are equipped with emergency tensioning retractors. These tensioning retractors are located in each belt’s inertia reel and become operationally ready with the electronic key in steering lock position 1 or 2.
J_A208.book Seite 67 Donnerstag, 31. Mai 2001 9:35 09 Airbags 2 SRS AIRBAG AIRBAG 1 1 Driver airbag 2 Front passenger airbag The driver airbag is located in the steering wheel hub. Restraint systems Instruments and controls Operation The passenger front airbag is located in the dashboard ahead of the front passenger.
J_A208.book Seite 68 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Restraint systems Practical hints Car care Technical data 68 mounted side impact airbags can provide increased protection to belted front passengers on the impacted side of the vehicle in side impacts exceeding its preset threshold. Important! 3 P91.60-2122-26 3 Side impact airbag The side impact airbags are located in the doors.
J_A208.book Seite 69 Donnerstag, 31. Mai 2001 9:35 09 Front airbags Initially, when the electronic key is turned from steering lock position 0 to positions 1 or 2, malfunctions in the crash-sensor are detected and indicated (the “SRS” indicator lamp stays on longer than 4 seconds or does not come on). The driver and front passenger front airbags are designed to activate only in certain frontal impacts exceeding a preset threshold.
J_A208.book Seite 70 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Restraint systems Practical hints Car care Technical data 70 Side impact airbags Important! The side impact airbags are designed to activate only in certain side impacts exceeding a preset threshold. Only the side impact airbag on the impacted side of the vehicle deploys.
J_A208.book Seite 71 Donnerstag, 31. Mai 2001 9:35 09 Your vehicle was originally equipped with airbags which are designed to activate in certain impacts exceeding a preset threshold to reduce the potential and severity of injury. It is important to your safety and that of your passengers that you replace deployed airbags and repair any malfunctioning airbags to ensure the vehicle will continue to provide crash protection for occupants.
J_A208.book Seite 72 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Restraint systems • Sit properly belted in an upright position with your back against the backrest. • Adjust the driver seat as far as possible rearward, still permitting proper operation of vehicle controls. The distance from the center of the driver’s breastbone to the center of the airbag cover on the steering wheel must be at least ten inches (25 cm) or more.
J_A208.book Seite 73 Donnerstag, 31. Mai 2001 9:35 09 Safety guidelines for the seat belt, emergency tensioning retractor and airbag Warning! Accident research shows that the safest place for children in an automobile is in the rear seat. Should you choose to place a child 12 years old or under in the front passenger seat of your vehicle, you must properly use a BabySmartTM child restraint which will turn off the passenger side front airbag.
J_A208.book Seite 74 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Restraint systems • No modifications of any kind may be made to any components or wiring of the “SRS”. This includes changing or removing any component or part of the “SRS”, the installation of additional trim material, badges etc.
J_A208.book Seite 75 Donnerstag, 31. Mai 2001 9:35 09 Infant and child restraint systems Important! We recommend all infants and children be properly restrained at all times while the vehicle is in motion. All lap-shoulder belts except the driver’s seat belt have special seat belt retractors for secure fastening of child restraints. The use of infant or child restraints is required by law in all 50 states and all Canadian provinces.
J_A208.book Seite 76 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Restraint systems Warning! Children 12 years old and under must never ride in the front seat, except in a Mercedes-Benz authorized BabySmartTM compatible child seat, which operates with the BabySmartTM system installed in the vehicle to deactivate the passenger front airbag when it is properly installed. Otherwise they will be struck by the airbag when it inflates in a crash.
J_A208.book Seite 77 Donnerstag, 31. Mai 2001 9:35 09 Adjusting telescoping steering column Unlocking: Pull handle (1) out to its stop. The indicator lamp, located in the instrument cluster, comes on. Adjusting: To lengthen or shorten the steering column, pull out or push in steering wheel. Locking: Push handle (1) in until it engages. The indicator lamp, located in the instrument cluster, goes out.
J_A208.book Seite 78 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Rear view mirrors Practical hints Car care Technical data 78 Inside rear view mirror Note: Manually adjust the inside mirror. The automatic antiglare function does not react, if incoming light is not aimed directly at sensors in the inside rear view mirror. The automatic antiglare function will not react for example, if the wind screen is installed.
J_A208.book Seite 79 Donnerstag, 31. Mai 2001 9:35 09 Exterior rear view mirrors With the electronic key in steering lock position 2, the driver’s side mirror reflection brightness responds to changes in light sensitivity. With gear selector lever in position “R”, or with the interior lamp switched on, the driver’s side mirror brightness does not respond to changes in light sensitivity. Warning! Exercise care when using the passenger-side mirror.
J_A208.book Seite 80 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Rear view mirrors Practical hints Car care Technical data 80 Warning! Important! In the case of an accident liquid electrolyte may escape the mirror housing when the mirror glass breaks. Electrolyte drops coming into contact with the vehicle paint finish can only be completely removed while in their liquid state, by applying plenty of water.
J_A208.book Seite 81 Donnerstag, 31. Mai 2001 9:35 09 Parking position One passenger-side mirror position can be stored in memory. To do so: The passenger-side exterior mirror can be adjusted and programmed to assist the driver during parking maneuvers (e.g. to observe the curb or other objects close to the vehicle). 1. Turn electronic key to steering lock position 2. The vehicle must be stationary.
J_A208.book Seite 82 Donnerstag, 31.
J_A208.book Seite 83 Donnerstag, 31. Mai 2001 9:35 09 1 Push buttons V and W for intensity of instrument lamps, see page 85 8 Speedometer 9 Trip odometer, see page 87 2 Push button J for resetting trip odometer, see page 87, or to acknowledge a malfunction or warning message, see page 104.
J_A208.book Seite 84 Donnerstag, 31.
J_A208.book Seite 85 Donnerstag, 31. Mai 2001 9:35 09 Instrument lamps Activating instrument cluster display The instrument cluster is activated by: • Opening the door. • Pressing button J, V or W on the instrument cluster. • Turning the electronic key in steering lock to position 1 or 2. • Switching on the exterior lamps. Display illumination The display for temperature, odometer, multifunction indicator, FSS indicator and clock is illuminated briefly when opening the driver’s door.
J_A208.book Seite 86 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Instrument cluster Practical hints Car care Technical data 86 Coolant temperature gauge (3) Outside temperature indicator (5) During severe operating conditions and stop-and-go city traffic, the coolant temperature may rise close to the red marking. The temperature sensor is located in the front bumper area.
J_A208.book Seite 87 Donnerstag, 31. Mai 2001 9:35 09 Trip odometer (9) Tachometer (13) To reset to “0” miles/km: The red marking on tachometer denotes excessive engine speed. Activate the instrument cluster if it is not already activated by pressing the J button on the instrument cluster. Avoid this engine speed, as it may result in serious engine damage that is not covered by the Mercedes-Benz Limited Warranty.
J_A208.book Seite 88 Donnerstag, 31.
J_A208.book Seite 89 Donnerstag, 31. Mai 2001 9:35 09 Press the è or ÿ button repeatedly until the required system is displayed. Depending on your vehicle’s equipment, you may use the buttons on the multifunction steering wheel to call up, control and set the following systems in the multifunction display: Pressing the è button advances the display to the next system. Pressing the ÿ button returns the display to the previous system.
J_A208.book Seite 90 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Instrument cluster display Driving Multifunction steering wheel, multifunction display Practical hints Car care Technical data 90 Turn the electronic key in steering look to position 1 or 2.
J_A208.book Seite 91 Donnerstag, 31. Mai 2001 9:35 09 Press the è or ÿ button repeatedly until the required system is displayed. Note: The displays in the multifunction display can be set to German, English, French, Italian or Spanish language. See the “TEXT” individual setting on page 106 for instructions on changing the language setting. Pressing the è button advances the display to the next system. Pressing the ÿ button returns the display to the previous system.
J_A208.book Seite 92 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Trip and main odometer and sub menu Practical hints Car care Technical data 92 1 Trip and main odometer See page 87 for instructions on resetting the trip odometer. 2 Vehicle speed 3 FSS (Flexible service system), see page 109. 4 Engine oil level indicator, see page 112.
J_A208.book Seite 93 Donnerstag, 31. Mai 2001 9:35 09 Audio systems 1 Audio system is switched off. Radio 2 The radio is switched on. 3 Wave band setting and memory location number, where appropriate. 4 Station frequency. 5 This only appears when “MEMORY” rather than “FREQUENCY” has been selected in the individual setting menu “STATION SEARCH USING”. See page 106. The radio must be switched on. Press the è or ÿ button repeatedly until display (2) appears.
J_A208.book Seite 94 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display CD player (optional) Practical hints Car care Technical data 94 1 Audio system is switched off. 2 The CD player is switched on. 3 The number of the CD currently playing is displayed if you are using a CD changer. 4 Track number. The radio must be switched on. The CD player must be switched on.
J_A208.book Seite 95 Donnerstag, 31. Mai 2001 9:35 09 Cassette player 1 Audio system is switched off. 2 The cassette player is switched on. 3 Side being played. The radio must be switched on. The cassette player must be switched on. Press the è or ÿ button repeatedly until display (2) appears. Pressing the j button fast forwards on to the next track. Pressing the k button rewinds the cassette to the beginning of the current track. Pressing the è or ÿ button displays the next or previous system.
J_A208.book Seite 96 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Practical hints Car care Technical data 96 Telephone 1 The telephone is switched off. Telephone book 2 The vehicle is currently outside the transmitter or receiver range. 3 The telephone is ready for use. 4 Name selected from the telephone book. 5 Number for the name selected. Dialing commences. 6 Dialing is completed.
J_A208.book Seite 97 Donnerstag, 31. Mai 2001 9:35 09 Press the í button when the name you require appears in the display (4). The telephone number (5) is dialed. The telephone must be switched on. Press the è or ÿ button repeatedly until the display (3) appears. Refer to the separate telephone instruction manual. The name will be displayed when dialing is completed. Display (6) remains for the duration of the call.
J_A208.book Seite 98 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Redialing Practical hints Car care Technical data 98 1 The telephone is ready for use. 2 Number or name stored in the redial memory. 3 Number in the redial memory – redialing has commenced.
J_A208.book Seite 99 Donnerstag, 31. Mai 2001 9:35 09 Press the í button when the required number or name appears in the display (2). The telephone number (3) is dialed. The telephone must be switched on. Press the è or ÿ button repeatedly until the display (1) appears. Once dialing is completed the name (4) is displayed if the name is stored in the telephone book; failing that the number dialed will remain displayed. The display remains for the duration of the call.
J_A208.book Seite 100 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Incoming call Practical hints Car care Technical data 100 1 “CALL” — you are being called Press the í button to answer the call. Press the ì button to hang up or if you do not wish to answer the incoming call. The telephone must be switched on.
J_A208.book Seite 101 Donnerstag, 31. Mai 2001 9:35 09 Navigation system (optional) 1 The navigation system is switched off. 2 The navigation system is switched on but no destination has been specified. 3 The navigation system is switched on and destination guidance is active. Press the è or ÿ button repeatedly until the required system is displayed. See the separate COMAND (Cockpit Management and Data System) operator’s manual for notes on the navigation system.
J_A208.book Seite 102 Donnerstag, 31.
J_A208.book Seite 103 Donnerstag, 31. Mai 2001 9:35 09 Press the button è or ÿ repeatedly until the display (1) appears. To reset the “AFTER START” (1) or “AFTER RESET” (2) odometer memory at any time: Press the j or k button until the display for trip odometer memory “AFTER START” (1) and “AFTER RESET” (2), or the display (3) for estimated driving range remaining and fuel tank contents appears.
J_A208.book Seite 104 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Malfunction/warning message memory Practical hints Car care Technical data 104 1 There are no messages stored in the system 2 Number of messages stored in the system Press the è or ÿ button repeatedly until the malfunction message memory (1 or 2) is displayed. Press the j or k button if display (2) appears.
J_A208.book Seite 105 Donnerstag, 31. Mai 2001 9:35 09 Important! Specific malfunctions can be recalled by pressing button J. Each malfunction or warning message must be acknowledged by pressing button J. Once all messages are cancelled, the odometer display should reappear. Malfunction and warning messages are only indicated for certain systems and displayed to a low level of detail.
J_A208.book Seite 106 Donnerstag, 31.
J_A208.book Seite 107 Donnerstag, 31.
J_A208.book Seite 108 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Press the è or ÿ button repeatedly until the individual setting preliminary display (1) appear. Press the j or k button until the required setting menu (2 to 8) is displayed. Pressing the æ or ç button sets the time in setting menus (2, 3) and controls the selection marker in setting menus (4 to 8).
J_A208.book Seite 109 Donnerstag, 31. Mai 2001 9:35 09 Flexible service system (FSS) (service indicator) 60 100 80 40 80 120 140 The message is displayed for approx. 10 seconds when turning the electronic key in steering lock to position 2, or while driving when reaching the service warning threshold.
J_A208.book Seite 110 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Flexible service system The service indicator disappears automatically after 30 seconds or if button J on the instrument cluster is pressed. Calling up service indicator manually: Turn the electronic key in steering lock to position 1 or 2. Call up the trip odometer and main odometer, by pressing button è or ÿ on the multifunction steering wheel until the display appears.
J_A208.book Seite 111 Donnerstag, 31. Mai 2001 9:35 09 Following a completed A or B service the Mercedes-Benz Center sets the counter mileage to 10 000 miles (Canada: 15 000 km). The multifunction display will show the question: “DO YOU WANT TO RESET SERVICE INTERVAL? – CONFIRM BY PRESSING R” The counter can also be set by any individual. To do so: Press button J on the instrument cluster again for approximately 4 seconds, and hold until a signal sounds.
J_A208.book Seite 112 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Engine oil level indicator Engine oil level indicator Practical hints Car care Technical data 112 Turn the electronic key in steering lock to position 2. To call up the trip odometer and main odometer, press button è or ÿ on the multifunction steering wheel until the display appears. See page 92.
J_A208.book Seite 113 Donnerstag, 31. Mai 2001 9:35 09 Perform the engine oil level check with the dipstick, if it cannot be completed via the multifunction display. See page 256. One of the following messages will subsequently appear on the indicator: “ENGINE OIL LEVEL – O.K.” No oil needs to be added. In this case we recommend that you have the system checked at a Mercedes-Benz Center. “ENGINE OIL LEVEL – ADD 1.0 QUART” (Canada: 1.0 L) Note: “ENGINE OIL LEVEL – ADD 1.5 QUART” (Canada: 1.
J_A208.book Seite 114 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Exterior lamp switch Exterior lamp switch Practical hints Car care Technical data 114 B Parking lamps plus low beam or high beam headlamps (combination switch pushed forward) ˆ Standing lamps, right (turn left one stop) ‚ Standing lamps, left (turn left two stops) … Front fog lamps (pull out one stop) with parking lamps and/or low beam headlamps on.
J_A208.book Seite 115 Donnerstag, 31. Mai 2001 9:35 09 Notes: Daytime running lamps (Canada only) With the electronic key removed and the driver’s door open, a warning sounds and the message “SWITCH OFF LIGHTS” in the multifunction indicator appears if the vehicle’s exterior lamps (except standing lamps) are not switched off.
J_A208.book Seite 116 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Headlamp cleaning system Practical hints Car care Technical data 116 Headlamp cleaning system (optional, standard on model CLK 55 AMG) The switch is located in the center console. The headlamp washer can be activated with the electronic key in steering lock position 2. Briefly press symbol side of switch. P82.
J_A208.book Seite 117 Donnerstag, 31. Mai 2001 9:35 09 Combination switch 3 High beam flasher (high beam available independent of exterior lamp switch position) 4 Turn signals, right 5 Turn signals, left 4 4 To signal minor directional changes, such as changing lanes on a highway, move combination switch to the point of resistance only and hold it there. 2 To operate the turn signals continuously, move the combination switch past the point of resistance (up or down).
J_A208.book Seite 118 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Instrument cluster display Driving Combination switch Practical hints Car care Technical data 118 7 Windshield wiper 7 0 Wiper off I Intermittent wiping (optional rain sensor: One initial wipe, pauses between wipes are automatically controlled by a rain sensor monitoring the wetness of the windshield.) Notes: 6 P54.
J_A208.book Seite 119 Donnerstag, 31. Mai 2001 9:35 09 Hazard warning flasher switch Vehicles without rain sensor: If the vehicle is standing still, the wiper will switch back to setting I, intermittent wiping. Windshield wiper smears If the windshield wiper smears the windshield, even during rain, activate the washer system as often as necessary. The fluid in the washer reservoir should be mixed in the correct ratio, see page 259.
J_A208.book Seite 120 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Instrument cluster display Driving Automatic climate control Practical hints Technical data Car care 120 Automatic climate control 3 3 4 1 2 65 DOLBY-STERE O z Mercedes-Ben * * P83.
J_A208.book Seite 121 Donnerstag, 31. Mai 2001 9:35 09 1 Air volume control for center air outlets, turn wheel up to open. The system will not heat or cool any quicker by setting a higher or lower temperature. 2 Air volume control for side air outlet. The automatic climate control removes considerable moisture from the air during operation in the cooling mode. It is normal for water to drip on the ground through ducts in the underbody. To open air outlets: Turn wheel to position i.
J_A208.book Seite 122 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Automatic climate control Practical hints Car care Technical data 122 P Defrost Display and controls O Air recirculation F Rear window defroster b Air distribution, manual S Economy mode ï Air volume, manual T Residual engine heat utilization 0 MAX Basic setting - automatic mode Press left and right U button for automatic mode.
J_A208.book Seite 123 Donnerstag, 31. Mai 2001 9:35 09 Economy Defrosting The function of this setting corresponds to the automatic mode. However, because the air conditioning compressor will not engage (fuel savings), it is not possible to air condition in this setting. Turn wheels (2) to position i to open left and right side air outlets (4). Adjust side air outlets upward. Press P button. Maximum heated and automatically controlled amount of air is directed to the windshield and side windows.
J_A208.book Seite 124 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Automatic climate control Rear window defroster Practical hints Car care Technical data 124 Air distribution To select, press F button. T To cancel, press F button again. Press b button for each side repeatedly until the requested symbol is displayed. Notes: Press U button to return to automatic mode.
J_A208.book Seite 125 Donnerstag, 31. Mai 2001 9:35 09 Air recirculation Residual engine heat utilization This mode can be selected to temporarily reduce the entry of annoying odors or dust into the vehicle’s interior. With the engine switched off, it is possible to continue heating the interior for a short while. Air volume and distribution are controlled automatically. Outside air is not supplied to the vehicle’s interior. To select, press O button. To select: To cancel, press O button again.
J_A208.book Seite 126 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Automatic climate control Practical hints Car care Technical data 126 Dust filter Important! Nearly all dust particles and pollen are filtered out before outside air enters the passenger compartment through the air distribution system. This vehicle is equipped with an air conditioner system that uses R–134a (HFC: hydrofluorocarbon) as a refrigerant.
J_A208.book Seite 127 Donnerstag, 31. Mai 2001 9:35 09 Operating safety Audio and telephone, operation These instructions are intended to help you become acquainted with your Mercedes-Benz vehicle radio. They contain useful tips and a detailed description of the user functions. Warning! Any alternations made to electronic components can cause malfunctions. The radio, cassette deck, CD changer1 and telephone1 are interconnected.
J_A208.book Seite 128 Donnerstag, 31.
J_A208.book Seite 129 Donnerstag, 31. Mai 2001 9:35 09 10 Soft keys for radio band selection, see page 133 tone controls, see page 131 scan, see page 134 Tape eject, see page 136 Tape track select, see page 136 Dolby, see page 138 CD Random/repeat, see page 142 11 Tape mode selector, see page 135 Anti-theft system If the power supply to the radio has been interrupted, “CODE” will appear on the display when it is next switched on.
J_A208.book Seite 130 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 130 Entering the code number Button and soft key operation Switch on the radio. “CODE” will appear on the display. Using the buttons on the alpha-numeric keypad, enter the five digit code. Confirm by pressing the “OK” key.
J_A208.book Seite 131 Donnerstag, 31. Mai 2001 9:35 09 Audio functions Operation The AUD key is used to select the BASS, TREBLE and BALANCE functions. Settings for bass and treble are stored separately for the cassette and CD modes. Tone level settings are identified by the vertical bars. The center (flat) setting is shown by one longer bar in the center of the display. Switching on and off Press the control knob .
J_A208.book Seite 132 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 132 Fader1 Centering all audio functions Press the AUD key repeatedly until “FADER” appears on the display. Press the “R” key to move the sound to the rear speakers or the “F” key to move the sound to the front speakers. Push and hold down the “AUD” key.
J_A208.book Seite 133 Donnerstag, 31. Mai 2001 9:35 09 Radio mode Manual tuning Press either the or button. Step-by-step tuning in ascending or descending order of frequency will take place. Selecting radio mode Press button. Selecting the band The first three tuning steps will take place without muting. The radio will then be muted and high-speed tuning will take place until the button is released.
J_A208.book Seite 134 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 134 Scan tuning Storing stations Press the SC key. Each strong receivable station on the band selected will be tuned in for 8 seconds. The first scan will tune only the stations with a high signal strength. The second scan will tune every receivable station.
J_A208.book Seite 135 Donnerstag, 31. Mai 2001 9:35 09 Cassette mode Note: Do not press directly on the radio display face. Note: Return the display panel to its normal position by folding it back up and pressing gently on the display frame to lock in place. Vehicles equipped with the COMAND system do not come with a factory installed cassette mechanism.
J_A208.book Seite 136 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 136 The radio will switch to cassette mode. Track 1 will be played and “SIDE 1” displayed. Track 1 is the side of the cassette which is facing upwards. The cassette deck will automatically detect the type of tape and switch the equalization automatically.
J_A208.book Seite 137 Donnerstag, 31. Mai 2001 9:35 09 Fast forward/reverse Track search forwards/backwards Press the button. “FORWARD” will appear on the display and fast forward will start. Press the button. “SEEK FWD” will be shown on the display and the track search will run the tape forwards to the start of the next track. Press the button. “REWIND” will appear on the display and fast reverse will start. Press the button.
J_A208.book Seite 138 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 138 Dolby NR1 (noise reduction system) Scanning Press the “SC” key. Each track on the cassette will be played for 8 seconds in ascending order. Note: The beginning of a track can only be located if there is a break of at least 4 seconds between tracks. Scan will be interrupted if the , buttons or the “SC” key is pressed.
J_A208.book Seite 139 Donnerstag, 31. Mai 2001 9:35 09 CD mode Only use CDs, which bear the label shown and that conform to the compact disc digital audio standard (IEC 60908). General notes on CD mode Should excessive temperatures occur while in CD mode, “TEMP HIGH” will appear in the display and muting will take place. The unit will then switch back to radio mode until the temperature has decreased to a safe operating level.
J_A208.book Seite 140 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 140 Loading/emptying the CD magazine CD changer installed Slide the changer door to the right and press the eject button . The magazine will be ejected. Remove the magazine. Pull out the CD tray until its stop is reached and place the CDs in the recess of the tray, label side up.
J_A208.book Seite 141 Donnerstag, 31. Mai 2001 9:35 09 Fast forward/reverse If there is no CD in the selected magazine slot, “NO CD” and the corresponding slot number will be displayed (e.g.“NO CD3”). After the last track on a CD has been played, the next CD will automatically be selected and played. button. The next track on the CD will be Press the button. If the track has been playing for more than 10 seconds, it will revert to the start of that track.
J_A208.book Seite 142 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 142 Random play/repeat function Direct track selection The tracks of the current CD are played in random order when the random feature (RDM) is selected. Press the RDM key to switch on, and press RDM again to switch off. Tracks can be selected directly using the buttons on the alpha-numeric keypad.
J_A208.book Seite 143 Donnerstag, 31. Mai 2001 9:35 09 Entering telephone number and starting dialing process Telephone operation Various functions of the Mercedes-Benz integrated cellular telephone1 can be performed and displayed via the car radio. Further instructions for operating the car telephone can be found in the operation guide for the cellular telephone1. Enter the desired telephone number using the alphanumeric keypad. The number can have up to 32 digits, but only 13 of these can be displayed.
J_A208.book Seite 144 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Audio system Switching between name search and number search Press ABC key - Name search Press NUM key - Number search Practical hints Car care Technical data 144 Placing a call When a number or a name has been selected using the method described above, press the SND key. Searching and selecting phone book entries by name Press the ABC key.
J_A208.book Seite 145 Donnerstag, 31. Mai 2001 9:35 09 Accepting incoming call in telephone mode Component malfunctions With an incoming call, the ringing tone will be heard and the message “CALL” appears in the display. Press the SND key to answer the call. The radio, CD changer1, and Mercedes-Benz integrated cellular telephone1 are part of a fiberoptic networked system. Failure of one of the components can lead to malfunctions of the other components.
J_A208.book Seite 146 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Interior equipment Power windows Practical hints Car care Technical data 146 Turn electronic key in steering lock to position 1 or 2. Press switch in to resistance point: k to open j to close Release switch when window is in desired position. Warning! When closing the windows, be sure that there is no danger of anyone being harmed by the closing procedure.
J_A208.book Seite 147 Donnerstag, 31. Mai 2001 9:35 09 Express opening and closing of door windows Notes: Press switch k or j past resistance point and release — window opens or closes completely. The power windows can also be opened and closed with the infrared remote control while locking the vehicle doors or trunk, see page 31. To interrupt procedure, briefly press k or j. If the express closing function of the door windows is interrupted, press and hold the switch j to close the window completely.
J_A208.book Seite 148 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Interior equipment Power windows – operated with soft top switch Practical hints Car care Technical data 148 When leaving the vehicle, always remove the electronic key from the steering lock, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment can cause serious personal injury.
J_A208.book Seite 149 Donnerstag, 31. Mai 2001 9:35 09 Interior lighting 1 Automatic interior lighting Press once and the automatic interior lighting is activated. 2 3 Interior lamps are switched on, and off (soft fade) delayed, when unlocking or locking the vehicle, or when opening or closing a door. However, there will be no (soft fade) delay when the electronic key is in steering lock position 2. 4 1 Press again and interior lamps remain switched off, even when centrally unlocking or opening a door.
J_A208.book Seite 150 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Interior equipment Practical hints Car care Technical data 150 Sun visors Illuminated vanity mirrors Swing sun visors down to protect against sun glare. With the visor engaged in its inner mounting, the lamp is switched on by opening the cover.
J_A208.book Seite 151 Donnerstag, 31. Mai 2001 9:35 09 Interior Glove box Warning! To help avoid personal injury during a collision or sudden maneuver, exercise care when stowing things. Put luggage or cargo in the trunk if possible. Do not pile luggage or cargo higher than the seat backs. Do not place anything on the shelf below the rear window. 1 2 3 Luggage nets cannot secure hard or heavy objects. Storage compartments, armrest and cup holder P68.00-2067-26 Warning! Keep compartment lids closed.
J_A208.book Seite 152 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Interior equipment Storage compartments in center console Practical hints Car care Technical data 152 To open compartment in armrest: Press button (4) and lift lid. To open compartment under armrest: Press button (5) and lift lid. To close: Lower lid until it engages in lock. To open cover: Touch top of cover (6) slightly. The cover opens automatically.
J_A208.book Seite 153 Donnerstag, 31. Mai 2001 9:35 09 Cup holder in center console Notes: The right claw is adjustable to accommodate most container sizes. An additional second (smaller size) container can be placed in the cup holder. Spilling liquids (e.g. soda or coffee) could restrict the movement of the claw. Refer to page 306 for cleaning the cup holder. Caution! Keep cup holder closed while traveling. Place only containers that fit into the cup holder to prevent spills.
J_A208.book Seite 154 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Interior equipment Ashtray Practical hints Car care Technical data 154 Prior to removing the ashtray insert, move the gear selector lever to position “N”. Warning! Remove front ashtray only with vehicle standing still. With the gear selector lever in position “N”, turn off the engine and set the parking brake.
J_A208.book Seite 155 Donnerstag, 31. Mai 2001 9:35 09 Lighter Turn electronic key in steering lock to position 1 or 2. Push in lighter (1); it will pop out automatically when hot. Warning! Never touch the heating element or sides of the lighter, they are extremely hot, hold at knob only. When leaving the vehicle always remove the electronic key from the steering lock. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle.
J_A208.book Seite 156 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Interior equipment Cargo tie down rings Practical hints Car care Technical data 156 Parcel net in front passenger footwell A small convenience parcel net is located in the front passenger footwell. It is for small and light items, such as road maps, mail, etc.. Warning! Do not place heavy or fragile objects, or objects having sharp edges, in the parcel net.
J_A208.book Seite 157 Donnerstag, 31. Mai 2001 9:35 09 Telephone, general Note: Warning! See separate instruction manual for instructions on how to operate the telephone. A driver’s attention to the road must always be his/ her primary focus when driving. For your safety and the safety of others, we recommend that you pull over to a safe location and stop before placing or taking a telephone call.
J_A208.book Seite 158 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Garage door opener Instrument cluster display Practical hints Car care Technical data 158 Garage door opener The built-in remote control is capable of operating up to three separately controlled objects. Warning! When programming a garage door opener, the door moves up or down.
J_A208.book Seite 159 Donnerstag, 31. Mai 2001 9:35 09 For operation in the USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 3. Using both hands, simultaneously push the handheld transmitter button and the desired integrated remote control button. Do not release the buttons until completing step 4. (1) This device may not cause harmful interference, and 4.
J_A208.book Seite 160 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Garage door opener Rolling code programming: To train a garage door opener (or other rolling code devices) with the rolling code feature, follow these instructions after completing the “Programming” portion of this text. (A second person may make the following training procedures quicker and easier.) 1. Locate training button on the garage door opener motor head unit.
J_A208.book Seite 161 Donnerstag, 31. Mai 2001 9:35 09 Erasing the remote control memory: Operation of remote control: 1. Turn electronic key in steering lock to position 1 or 2. 1. Turn electronic key in steering lock to position 1 or 2. 2. Select and press the appropriate button to activate the remote controlled device. The integrated remote control transmitter continues to send the signal as long as the button is pressed – up to 20 seconds. 2.
J_A208.book Seite 162 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Soft top Practical hints Car care Technical data 162 Soft top 1 A minimum height clearance of 6 /2 ft. (2 m) is required to lower or raise the soft top. The raising or lowering procedure can only be started with the luggage cover (page 250) and trunk lid closed. The raising or lowering procedure is immediately interrupted by releasing the soft top switch.
J_A208.book Seite 163 Donnerstag, 31. Mai 2001 9:35 09 Warning! Never lock or unlock the soft top while driving. Doing so could cause the driver to lose control of the vehicle. 1 Driving with an unlocked soft top may cause personal injury to you or your passenger, or personal injury or property damage to others. 2 1 Before operating the soft top switch make sure that no persons due to inattention are injured by the moving parts (roll bar, soft top frame and soft top compartment cover). P65.
J_A208.book Seite 164 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Soft top Practical hints Car care Technical data 164 2 1 P77.30-2080-26 P77.30-2070-26 Lowering Soft Top 1. Engage parking brake. 2. Close luggage cover and trunk lid. For notes on the luggage cover, see page 250. 3. Turn electronic key in steering lock to position 2. 4. Press lock button (1) and fold down locking handle (2). 5.
J_A208.book Seite 165 Donnerstag, 31. Mai 2001 9:35 09 6. Lift symbol side of the soft top switch and hold: • The roll bar lowers (when in the upper position). • The soft top compartment cover and rear window section of the soft top unlocks. • The rear window section of the soft top raises. • The soft top compartment cover opens. • The soft top lowers into its storage compartment. • The soft top compartment cover closes and locks.
J_A208.book Seite 166 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Soft top Practical hints Car care Technical data 166 Warning! To prevent possible accidents, drive the vehicle only with the soft top either completely closed and locked, or fully lowered into its storage compartment. Note: For safety reasons, the soft top cannot be lowered while driving. Raising Soft Top 1. Engage parking brake. 2. Close luggage cover and trunk lid.
J_A208.book Seite 167 Donnerstag, 31. Mai 2001 9:35 09 2 1 P77.30-2070-26 If the soft top switch is held or is released and pressed again within approximately 2 seconds, the side windows will close. If the roll bar was previously in the upright position, it will return to that position. 5. Press lock button (1) and fold down locking handle (2). 6. Turn locking handle 90° clockwise and pull soft top frame carefully down until it meets the windshield header attachment points.
J_A208.book Seite 168 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Soft top Practical hints Car care Technical data 168 Note: For safety reasons, the soft top cannot be raised while driving. Warning! The soft top is not fully closed and locked: • if the indicator lamp in the soft top switch does not got out (electronic key in steering lock position 2). • if the indicator lamp blinks, and a signal sounds for 10 seconds when starting to drive.
J_A208.book Seite 169 Donnerstag, 31. Mai 2001 9:35 09 If the indicator lamp in the soft top switch blinks slowly while activating the switch, Have the system checked at your authorized Mercedes-Benz Center as soon as possible. • the battery voltage may be insufficient – start engine and let it run while activating switch, Notes: If the roll bar was raised automatically, the process of raising or lowering the soft top will take somewhat longer, as the roll bar must first be lowered.
J_A208.book Seite 170 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Wind screen Practical hints Car care Technical data 170 Wind screen (optional) Installation 2 1. Remove wind screen from its storage bag, located in the trunk, secured with hook and loop fasteners, and unfold. 2. Pull folded end sections in direction of arrow (1) and unfold in direction of arrow (2). 1 P65.
J_A208.book Seite 171 Donnerstag, 31. Mai 2001 9:35 09 6 3. Insert end section in right opening (3) on quarter panel first. Then push left end section toward vehicle center (arrow 4) until it meets the left opening. Insert end section in left opening (5). 3 Push down on wind screen (6) until it locks in place. 4 Warning! Check for secure locking by pulling up on the wind screen. 5 P65.00-2039-26 Important! The open end of the hooks must point toward the vehicle’s front.
J_A208.book Seite 172 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Wind screen Practical hints Car care Technical data 172 Removal Push left and right side buttons and remove wind screen upward. Warning! To prevent personal injury, remove wind screen if rear seats are to be occupied by passengers. Note: P65.00-2009-26 Do not insert foreign objects in openings for the wind screen.
J_A208.book Seite 173 Donnerstag, 31. Mai 2001 9:35 09 Storing Place wind screen in its storage bag, and close the bag. Place bag in trunk, and secure it with the provided hook and loop fasteners. 1 2 When the wind screen is not in use, it should be stored in the closed storage bag, to prevent possible damage to the wind screen or luggage/cargo. P65.00-2011-26 Pull end sections in direction of arrow (1) and fold in direction of arrow (2).
J_A208.book Seite 174 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Instrument cluster display Driving Wind screen Practical hints Car care Technical data 174 Roller Blind (horizontal) To open blind: 1. Pull out blind on tab (arrow 1) towards vehicles rear. Insert guide rod of blind in right rear seat belt outlet (arrow 2). 2 2. Insert other end of rod in left rear seat belt outlet as shown with arrow (3). 1 3 Important! Do not place anything on the roller blind.
J_A208.book Seite 175 Donnerstag, 31. Mai 2001 9:35 09 Roller Blind (vertical) To open blind: 1. Fold driver and front passenger seat backrests forward. 2. Pull out on tab, located below rear bench, towards vehicle’s front, then pull up and engage blind at wind screen. To retract blind: 1. Fold driver and front passenger seat backrests forward. 2. Hold blind at tab, disengage and guide its retraction. P65.
J_A208.book Seite 176 Donnerstag, 31.
J_A208.book Seite 177 Donnerstag, 31. Mai 2001 9:35 09 Driving Control and operation of radio transmitters ..................... 178 The first 1 000 miles (1 500 km) ................................. 179 Maintenance ................................... 179 Catalytic converter ........................ 180 Emission control ............................ 181 Tele Aid ........................................... 182 Steering lock ................................... 192 Starting and turning off the engine .........
J_A208.book Seite 178 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Control and operation of radio transmitters Practical hints Car care Technical data 178 Control and operation of radio transmitters COMAND, radio and telephone Telephones and two-way radio Warning! Warning! Please do not forget that your primary responsibility is to drive the vehicle.
J_A208.book Seite 179 Donnerstag, 31. Mai 2001 9:35 09 The first 1 000 miles (1 500 km) Maintenance The more cautiously you treat your vehicle during the break-in period, the more satisfied you will be with its performance later on. Therefore, drive your vehicle during the first 1 000 miles (1 500 km) at moderate vehicle and engine speeds.
J_A208.book Seite 180 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Catalytic converter Practical hints Car care Technical data 180 Catalytic converter Caution! Your Mercedes-Benz is equipped with monolithic type catalytic converters, an important element in conjunction with the oxygen sensors to achieve substantial control of the pollutants in the exhaust emissions.
J_A208.book Seite 181 Donnerstag, 31. Mai 2001 9:35 09 Emission control Warning! Certain systems of the engine serve to keep the toxic components of the exhaust gases within permissible limits required by law. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide, and inhaling it can cause unconsciousness and lead to death. These systems, of course, will function properly only when maintained strictly according to factory specifications.
J_A208.book Seite 182 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 182 Tele Aid (optional for Canada) Important! The initial activation of the Tele Aid system may only be performed by completing the subscriber agreement and placing an acquaintance call using the “SOS” button. Failure to complete either of these steps will result in a system that is not activated.
J_A208.book Seite 183 Donnerstag, 31. Mai 2001 9:35 09 Important! Once the emergency call is in progress, the indicator lamp in the “SOS” button will begin to flash. The message “EMERGENCY CALL – CONNECTING CALL” appears in the multifunction display. When the connection is established, the message “EMERGENCY CALL – CALL CONNECTED” appears in the multifunction display.
J_A208.book Seite 184 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 184 The Tele Aid system is available if: • it has been activated and is operational. Activation requires a subscription for monitoring services and cellular air time, • the relevant cellular phone network and GPS signals are available and pass the information on to the response center.
J_A208.book Seite 185 Donnerstag, 31. Mai 2001 9:35 09 Initiating an emergency call manually Warning! If you feel at any way in jeopardy when in the vehicle (e.g. smoke or fire in the vehicle, vehicle in a dangerous road location), please do not wait for voice contact after you have pressed the emergency button. Carefully leave the vehicle and move to a safe location.
J_A208.book Seite 186 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 186 Roadside Assistance button • Located below the center armrest cover is the Roadside Assistance button •. Pressing and holding the button (for longer than 2 seconds) will initiate a call to a Mercedes-Benz Roadside Assistance dispatcher. The button will flash while the call is in progress.
J_A208.book Seite 187 Donnerstag, 31. Mai 2001 9:35 09 A voice connection between the Customer Assistance Center representative and the occupants of the vehicle will be established. When a voice connection is established the audio system mutes and the message “TELE AID – INFO CALL ACTIVE” appears in the multifunction display. Information regarding the operation of your vehicle, the nearest Mercedes-Benz Center or Mercedes-Benz USA products and services is available to you.
J_A208.book Seite 188 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 188 Tele Aid system could not initiate an Information call (e.g. the relevant cellular phone network is not available). The message “INFO – CALL FAILED” appears in the multifunction display. Information calls can be terminated using the ì button on the multifunction steering wheel.
J_A208.book Seite 189 Donnerstag, 31. Mai 2001 9:35 09 Important! When a Tele Aid call has been initiated, the audio system or the COMAND system audio (only vehicles with COMAND) is muted and the selected mode (radio, tape or CD) pauses. The optional cellular phone (if installed) switches off. If you must use this phone, the vehicle must be parked. Disconnect the coiled cord and place the call. The navigation system (if engaged) will continue to run.
J_A208.book Seite 190 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 190 Remote door unlock Notes: In the case you have your vehicle locked unintentionally (e.g. key inside vehicle), and the reserve key is not handy, contact the Mercedes-Benz Response Center at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in Canada).
J_A208.book Seite 191 Donnerstag, 31. Mai 2001 9:35 09 Stolen vehicle tracking services Once information is available, the message “NEW INFO RECEIVED - READ LATER WHEN STOPPED?” will appear. Select “Yes”. With the vehicle stopped in a safe location press SVC, then select “View Info Service of mm.dd.yyyy hh.mm”. Messages will be retained for 30 minutes once the ignition is switched off. In the event your vehicle was stolen, report the incident to the police who will issue a numbered incident report.
J_A208.book Seite 192 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Steering lock Practical hints Car care Technical data 192 1 Steering is unlocked. Steering lock (If necessary, move steering wheel slightly to allow the electronic key to be turned clockwise to position 1.) Most electrical consumers can be operated. For detailed information see respective subjects. 2 Driving position. Gear selector lever is unlocked.
J_A208.book Seite 193 Donnerstag, 31. Mai 2001 9:35 09 Important! Notes: If the electronic key is left in the steering lock position 0 for an extended period of time, it can no longer be turned in the lock. In this case, remove electronic key from steering lock and reinsert. A warning sounds when the driver’s door is opened while the electronic key is in steering lock position 1 or 0. If the electronic key cannot be turned in the steering lock, the vehicle battery may not be sufficiently charged.
J_A208.book Seite 194 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Starting and turning off the engine Practical hints Car care Technical data 194 Starting and turning off the engine Important! Before starting Due to the installed starter non-repeat feature, the electronic key must be turned completely to the left before attempting to start the engine again.
J_A208.book Seite 195 Donnerstag, 31. Mai 2001 9:35 09 Automatic transmission The automatic transmission selects individual gears automatically, dependent upon • Selector lever position • Program mode selector • Accelerator position • Vehicle speed The gear shifting process is continuously adapted, dependent on the driving style, the driving situation and the road characteristics.
J_A208.book Seite 196 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Automatic transmission Practical hints Car care Technical data 196 Driving Important! The selector lever is automatically locked while in position “P”. To move the selector lever out of position “P”, the service brake pedal must be firmly depressed before the shift lock will release.
J_A208.book Seite 197 Donnerstag, 31. Mai 2001 9:35 09 Stopping Rocking a vehicle free in this manner may cause the ABS or traction system malfunction indicator lamp to come on. Turn off and restart the engine to clear the malfunction indication. For brief stops, e.g. at traffic lights, leave the transmission in gear and hold vehicle with the service brake. For longer stops with the engine idling, shift into “N” or “P” and hold the vehicle with the service brake.
J_A208.book Seite 198 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Automatic transmission Selector lever position 10 Practical hints Car care Technical data 198 Park position The park position is to be used when parking the vehicle. Engage only with the vehicle stopped. The park position is not intended to serve as a brake when the vehicle is parked.
J_A208.book Seite 199 Donnerstag, 31. Mai 2001 9:35 09 Gear selection for special circumstances Dependent on the program mode selector switch position “S” or “W” the maximum speed in the reverse gear is different. However, it is not possible to change the program mode while in reverse. The transmission gear ranges for special circumstances can be selected by pressing the selector lever to the right or the left with the selector lever in position “D”.
J_A208.book Seite 200 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Automatic transmission Press and hold selector lever in the æ direction: The transmission will shift from the current gear directly to gear range “D”. Warning! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle’s ABS will not prevent this type of loss of control.
J_A208.book Seite 201 Donnerstag, 31. Mai 2001 9:35 09 Upshift through 2nd gear only. For driving in mountainous regions or under extreme operating conditions. This gear selection will allow use of the engine’s braking power when descending steep grades. Gear ranges: Upshift through 4th gear only. Suitable for performance driving. Upshift through 3rd gear only. Suitable for moderately steep hills.
J_A208.book Seite 202 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Automatic transmission Practical hints Car care Technical data 202 Program mode selector switch Accelerator Operation: Fast on = depressing the accelerator pedal quickly (not into kickdown position) while driving continuously, rather than depressing the accelerator pedal in the usual manner, will cause the automatic transmission to shift down into a lower gear.
J_A208.book Seite 203 Donnerstag, 31. Mai 2001 9:35 09 Caution! In this mode only the 2nd gear or reverse gear can be activated. Never change the program mode when the selector lever is out of position “P”. It could result in a change of driving characteristics for which you may not be prepared. To engage 2nd gear or reverse: 1. Stop the vehicle. 2. Move selector lever to position “P”. Important! 3. Turn off the engine.
J_A208.book Seite 204 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Parking brake Parking brake Driving Instrument cluster display Practical hints Car care Technical data 204 To engage, firmly depress parking brake pedal. When the electronic key is in steering lock position 2, the brake warning lamp in the instrument cluster should come on brightly. To release the parking brake, pull handle on instrument panel. The brake warning lamp in the instrument cluster should go out.
J_A208.book Seite 205 Donnerstag, 31. Mai 2001 9:35 09 Driving instructions Drinking and driving Drive sensibly – save fuel Warning! Fuel consumption, to a great extent, depends on driving habits and operating conditions. Drinking or taking drugs and driving can be a very dangerous combination. Even a small amount of alcohol or drugs can affect your reflexes, perceptions and judgement.
J_A208.book Seite 206 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Driving instructions Power assistance Warning! When the engine is not running, the brake and steering systems are without power assistance. Under these circumstances, a much greater effort is necessary to stop or steer the vehicle.
J_A208.book Seite 207 Donnerstag, 31. Mai 2001 9:35 09 Driving off All checks and service work on the brake system should be carried out by an authorized Mercedes-Benz Center. Apply the service brakes to test them briefly after driving off. Perform this procedure only when the road is clear of other traffic. Install only brake pads and brake fluid recommended by Mercedes-Benz. Warm up the engine smoothly. Do not place full load on the engine until the operating temperature has been reached.
J_A208.book Seite 208 Donnerstag, 31.
J_A208.book Seite 209 Donnerstag, 31. Mai 2001 9:35 09 Specified tire pressures must be maintained. This applies particularly if the tires are subjected to high loads (e.g. high speeds, heavy loads, high ambient temperatures). Warning! Do not drive with a flat tire. A flat tire affects the ability to steer or brake the vehicle. You may lose control of the vehicle. Continued driving with a flat tire or driving at high speed with a flat tire will cause excessive heat build-up and possibly a fire.
J_A208.book Seite 210 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Driving instructions Practical hints Car care Technical data 210 Tire traction Tire speed rating The safe speed on a wet, snow covered or icy road is always lower than on a dry road. CLK 320: Your vehicle is factory equipped with “H”-rated tires, which have a speed rating of 130 mph (210 km/h).
J_A208.book Seite 211 Donnerstag, 31. Mai 2001 9:35 09 Exceeding the maximum speed for which tires are rated can lead to sudden tire failure causing loss of vehicle control and resulting in personal injury and possible death. Winter driving instructions Snow chains When the vehicle is in danger of skidding, move selector lever to position “N”. Try to keep the vehicle under control by corrective steering action.
J_A208.book Seite 212 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Driving instructions If the vehicle is parked after being driven on salt treated roads, the braking efficiency should be tested as soon as possible after driving is resumed while observing the safety rules in the previous paragraph. Warning! If the vehicle becomes stuck in snow, make sure that snow is kept clear of the exhaust pipe and from around the vehicle with engine running.
J_A208.book Seite 213 Donnerstag, 31. Mai 2001 9:35 09 Passenger compartment In winter operation, the maximum effectiveness of the antilock brake system (ABS) or of the electronic stability program (ESP) can only be achieved with M+S rated radial-ply tires and/or snow chains recommended by Mercedes-Benz. Snow chains maximize performance. Warning! Always fasten items being carried as securely as possible. For driving instructions with snow chains, see page 211.
J_A208.book Seite 214 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Instrument cluster display Driving Driving systems Practical hints Car care Technical data 214 Cruise control 1 Accelerate and set: Lift lever briefly to set speed. Hold lever up to accelerate. 1 2 Decelerate and set: Depress lever briefly to set speed. Hold lever down to decelerate. 3 Normally the vehicle is accelerated to the desired speed with the accelerator.
J_A208.book Seite 215 Donnerstag, 31. Mai 2001 9:35 09 Important! 3 Canceling Moving gear selector lever to position “N” switches the cruise control off. To cancel the cruise control, briefly push lever to position 3. When you step on the brake pedal or the vehicle speed drops below approx. 25 mph (40 km/h), for example when driving upgrade, the cruise control will be canceled. Warning! Only use the cruise control if the traffic and weather conditions make it advisable to travel at a steady speed.
J_A208.book Seite 216 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Driving systems Notes: If the engine does not brake the vehicle sufficiently while driving on a downgrade, the speed you set on the cruise control may be exceeded. In this case the automatic transmission shifts down (max. to 3rd gear) to maintain the set cruise control speed by using the engine’s braking power.
J_A208.book Seite 217 Donnerstag, 31. Mai 2001 9:35 09 Applying the brakes very quickly results in maximum BAS assistance. If the charging voltage falls below 10 volts, the malfunction indicator lamp comes on and the BAS is switched off. When the voltage is above this value again, the malfunction indicator lamp should go out and the BAS is operational. To receive the benefit of the system you must apply continuous full braking power during the stopping sequence. Do not reduce brake pedal pressure.
J_A208.book Seite 218 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Driving systems Antilock brake system (ABS) Warning! Do not pump the brake pedal, rather use firm, steady brake pedal pressure. Pumping the brake pedal defeats the purpose for ABS and significantly reduces braking effectiveness. Important! The ABS improves steering control of the vehicle during hard braking maneuvers.
J_A208.book Seite 219 Donnerstag, 31. Mai 2001 9:35 09 ABS control If the ABS malfunction indicator lamp stays illuminated, have the system checked at your authorized Mercedes-Benz Center as soon as possible. The ABS malfunction indicator lamp - in the instrument cluster comes on with the electronic key in steering lock position 2 and should go out with the engine running.
J_A208.book Seite 220 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Driving systems Electronic stability program (ESP) Warning! ESP cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded. The ESP cannot prevent accidents, including those resulting from excessive speed in turns, or aquaplaning. Only a safe, attentive, and skillful driver can prevent accidents.
J_A208.book Seite 221 Donnerstag, 31. Mai 2001 9:35 09 Driving the vehicle with varied size tires will cause the wheels to rotate at different speeds, therefore the ESP may activate (yellow ESP warning lamp in speedometer dial comes on). For this reason, all wheels, including the spare wheel, must have the same tire outside diameter. Notes: The malfunction indicator lamp ¿ for the ESP is combined with that of the BAS.
J_A208.book Seite 222 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Driving systems Practical hints Car care Technical data 222 ESP control switch To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand or gravel, switch off ESP by pressing the upper half of the ESP switch. The ESP warning lamp v, located in the speedometer dial, is continuously illuminated.
J_A208.book Seite 223 Donnerstag, 31. Mai 2001 9:35 09 Note: Important! Avoid spinning of one drive wheel. This may cause serious damage to the drive train which is not covered by the Mercedes-Benz Limited Warranty. If the ESP warning lamp flashes: • during take-off, apply as little throttle as possible, • while driving, ease up on the accelerator. Warning! ESP should not be switched off during normal driving other than in circumstances described above.
J_A208.book Seite 224 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display What you should know at the gas station What you should know at the gas station Practical hints Car care Technical data 224 Open flap by pushing near front (arrow). Turn fuel cap to the left and hold on to it until possible pressure in tank has been released, then remove cap. Failure to remove slowly could result in personal injury.
J_A208.book Seite 225 Donnerstag, 31. Mai 2001 9:35 09 • Engine oil • Air conditioner Engine oil level check, see page 112 and page 256. R-134a refrigerant and special PAG lubricant, see page 318. Fill quantity between upper and lower dipstick marking level: 2.1 US qt (2.0 l). • Bulbs Recommended engine oils, see Approved Service Products sheet. High and low beams: H7 (55 W), low beam: Xenon (optional) fog lamps: H1 (55 W), turn signal lamps, front 1156 NA (26.
J_A208.book Seite 226 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Check regularly and before a long trip Check regularly and before a long trip Instrument cluster display Practical hints Car care Technical data 226 1 Engine oil level See “Engine oil level, checking” on page 112 and page 256. 2 Coolant level See “Coolant level” on page 257. 3 Brake fluid See “Brake fluid” on page 320.
J_A208.book Seite 227 Donnerstag, 31. Mai 2001 9:35 09 Instrument cluster display Malfunction and indicator lamps in the instrument cluster ....................228 On-board diagnostic system Check engine malfunction indicator lamp .............................228 Brake warning lamp ..................229 Supplemental restraint system (SRS) indicator lamp ....230 Fuel reserve and fuel cap placement warning ....................230 Electronic stability program (ESP) — warning lamp ...............
J_A208.book Seite 228 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Malfunction and indicator lamps Malfunction and indicator lamps in the instrument cluster General information: If a bulb in the instrument cluster fails to light up during the bulb self-check when turning the electronic key in steering lock to position 2, have it checked and replaced if necessary.
J_A208.book Seite 229 Donnerstag, 31. Mai 2001 9:35 09 Brake warning lamp BRAKE Warning! Driving with the brake warning lamp illuminated can result in an accident. Have your brake system checked immediately if the brake warning lamp stays on. Don’t add brake fluid before checking the brake system. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. You can be seriously burned.
J_A208.book Seite 230 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Malfunction and indicator lamps Supplemental restraint system (SRS) indicator lamp The operational readiness of the airbag system is verified by the indicator lamp “SRS” in the instrument cluster when turning the electronic key in steering lock to position 1 or 2.
J_A208.book Seite 231 Donnerstag, 31. Mai 2001 9:35 09 Electronic stability program (ESP) — warning lamp ABS malfunction indicator lamp The yellow ESP warning lamp in the speedometer dial comes on with the electronic key in steering lock position 2. It should go out with engine running. The ABS malfunction indicator lamp in the instrument cluster comes on with the electronic key in steering lock position 2 and should go out with the engine running.
J_A208.book Seite 232 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Malfunction and indicator lamps Telescoping steering column – indicator lamp The indicator lamp in the instrument cluster comes on with the electronic key in steering lock position 2 and should go out with the engine running. If the indicator lamp does not go out after starting the engine, the adjustable steering column is not properly locked.
J_A208.book Seite 233 Donnerstag, 31. Mai 2001 9:35 09 Warning! Roll bar warning lamp The BabySmartTM airbag deactivation system will ONLY work with a special child seat designed to operate with it. It will not work with child seats which are not BabySmartTM compatible. The roll bar warning lamp is located in the roll bar switch in the center console. Roll bar switch see page 52.
J_A208.book Seite 234 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Malfunction and warning messages in the multifunction display Practical hints Car care Technical data 234 Notes: Malfunction and warning messages for the following systems will be displayed immediately in the multifunction display. Certain malfunction and warning messages are accompanied by an audible signal.
J_A208.book Seite 235 Donnerstag, 31. Mai 2001 9:35 09 DISPLAY DEFECTIVE (engine control unit) DISPLAY DEFECTIVE (several systems) Line 1 Line 2 Line 1 Line 2 DISPLAY DEFECTIVE VISIT WORKSHOP! DISPLAY DEFECTIVE VISIT WORKSHOP! This message is displayed to indicate that the information being relayed by the engine control unit is no longer complete. The coolant temperature gauge, tachometer, or the cruise control may have failed.
J_A208.book Seite 236 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 236 BATTERY/ALTERNATOR This message indicates a malfunction which must be repaired immediately. It may indicate that the poly-V-belt has broken. Should this condition occur, the poly-V-belt must be replaced before continuing to operate the vehicle.
J_A208.book Seite 237 Donnerstag, 31. Mai 2001 9:35 09 ABS-SYSTEM BRAKE ASSIST P54.30-2938-21 Line 1 Line 2 Line 1 Line 2 ABS-SYSTEM VISIT WORKSHOP! BRAKE ASSIST VISIT WORKSHOP! DISPLAY DEFECTIVE VISIT WORKSHOP! A malfunction has been detected in the system. The brake system functions in the usual manner, but without antilock assistance. A malfunction has been detected in the system. The brake system functions in the usual manner, but without BAS.
J_A208.book Seite 238 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 238 BRAKE LINING WEAR BRAKE FLUID Line 1 Line 2 Line 1 Line 2 BRAKE LINING WEAR VISIT WORKSHOP! BRAKE FLUID VISIT WORKSHOP! When this message appears during braking, it indicates that the brake pads are worn down.
J_A208.book Seite 239 Donnerstag, 31. Mai 2001 9:35 09 PARKING BRAKE ENGINE FAN Line 1 Line 2 Line 1 Line 2 PARKING BRAKE RELEASE BRAKE! ENGINE FAN VISIT WORKSHOP!1 Parking brake, see page 204. Malfunction and warning messages Instruments and controls Operation 1 The cooling fan for the coolant is faulty. Observe coolant temperature gauge while driving, see page 86.
J_A208.book Seite 240 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 240 COOLANT (coolant level) The low engine coolant level warning should not be ignored. Extended driving with the symbol displayed may cause serious engine damage not covered by the Mercedes-Benz Limited Warranty.
J_A208.book Seite 241 Donnerstag, 31. Mai 2001 9:35 09 COOLANT TEMP. (coolant temperature) During severe operating conditions and stop-and-go city traffic, the coolant temperature may rise close to the red marking. The engine should not be operated with the coolant temperature in the red zone. Doing so may cause serious engine damage which is not covered by the Mercedes-Benz Limited Warranty. Warning! Line 1 Line 2 COOLANT TEMP.
J_A208.book Seite 242 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 242 LIGHTING SYSTEM When the message appears after starting the engine, or if it comes on while driving, this indicates a failure in the parking lamp, taillamp, stop lamp, or low beam headlamp. See page 280 for instructions on replacing bulbs.
J_A208.book Seite 243 Donnerstag, 31. Mai 2001 9:35 09 LIGHT SENSOR STEER. WHEEL ADJUST. With the electronic key removed and the driver’s door open, a warning sounds and the message “SWITCH OFF LIGHTS!” appears in the multifunction indicator if the vehicle’s exterior lamps (except standing lamps) are not switched off. Malfunction and warning messages Instruments and controls Operation Line 1 Line 2 STEER. WHEEL ADJUST. For locking the adjustable telescoping steering column, see page 77.
J_A208.book Seite 244 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 244 ENGINE OIL LEVEL 3 There is a risk of damaging the engine or catalytic converter. The engine oil level must be checked immediately. See Engine oil level indicator on page 112. 4 The engine oil level has dropped to a critical level. Check the engine oil level immediately.
J_A208.book Seite 245 Donnerstag, 31. Mai 2001 9:35 09 REMOVE KEY ELEC. STABIL. PROG. (Electronic stability program) P54.30-3573-21 Line 1 Line 2 Line 1 DISPLAY DEFECTIVE VISIT WORKSHOP! ELEC. STABIL. PROG. VISIT WORKSHOP!1, 2, 3 Line 2 REMOVE KEY! This message plus an audible alarm indicate that the electronic key is in steering lock position 0 or 1, and the driver’s door is open. 1 A malfunction has been detected in the system. Pressing the accelerator pedal will require greater effort.
J_A208.book Seite 246 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Malfunction and warning messages Instrument cluster display Practical hints Car care Technical data 246 WASHER FLUID When this message appears while the engine is running, the level of the reservoir has dropped to approx. 1/3 of the total volume.
J_A208.book Seite 247 Donnerstag, 31. Mai 2001 9:35 09 TELE AID Line 1 Line 2 TELE AID VISIT WORKSHOP!1 1 When this message appears, a malfunction has been detected in the Tele Aid system. In some cases it may not be possible to initiate an Emergency, Roadside Assistance or Information call. See page 182 for notes on the Tele Aid. If a malfunction is indicated as outlined above, have the system checked at the nearest Mercedes-Benz Center as soon as possible.
J_A208.book Seite 248 Donnerstag, 31.
J_A208.book Seite 249 Donnerstag, 31. Mai 2001 9:35 09 Practical hints First aid kit .....................................250 Shelf below rear window ..............250 Stowing things in the vehicle ..................................250 Luggage cover .................................250 Fuses ................................................252 Hood .................................................254 Checking engine oil level .............256 Automatic transmission fluid level ..............................
J_A208.book Seite 250 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display First aid kit First aid kit Practical hints Car care Technical data 250 Luggage cover The first aid kit is stored in the left trunk well. Shelf below rear window Warning! The shelf below the rear window should not be used to carry objects. This will avoid such objects from being thrown about and injuring vehicle occupants during an accident or sudden maneuver.
J_A208.book Seite 251 Donnerstag, 31. Mai 2001 9:35 09 Important! To prevent damage to soft top or luggage/cargo when lowering the roof: • load trunk only to the height of the luggage cover, • do not permit luggage/cargo to raise the closed luggage cover, • do not load anything on top of the luggage cover, • do not operate the luggage cover with the soft top lowered. Doing so will result in damage to the luggage cover or the soft top. P65.
J_A208.book Seite 252 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Fuses Practical hints Technical data Car care 252 Fuses Fuse box in engine compartment Before replacing a blown fuse, determine the cause of the short circuit. Spare fuses are supplied inside the main fuse box (1). Observe amperage and color of fuse. A special fuse puller is supplied with the vehicle tools. 1 Always use a new fuse for replacement.
J_A208.book Seite 253 Donnerstag, 31. Mai 2001 9:35 09 Auxiliary fuse box below the trunk floor Auxiliary fuse box in the dashboard 2 P 2 Auxiliary fuse box below the trunk floor. 3 Auxiliary fuse box to left of exterior lamp switch. To gain access, lift trunk floor. Fuses Instruments and controls To gain access, open door, pry off cover (3) and remove.
J_A208.book Seite 254 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Engine compartment Hood Warning! To help prevent personal injury, stay clear of moving parts when the hood is open and the engine is running. Be sure the hood is properly closed before driving. When closing hood, use extreme caution not to catch hands or fingers.
J_A208.book Seite 255 Donnerstag, 31. Mai 2001 9:35 09 3 3 1 2 P88.40-2017-26 P88.40-2025-26 Pull handle (2) to its stop out of radiator grill and open hood (do not pull up on handle). To open: To unlock the hood, pull release lever (1) under the driver’s side of the instrument panel. At the same time a handle will extend out of the radiator grill (it may be necessary to lift the hood up slightly). To close: Lower hood and let it drop into lock from a height of approx. 1 ft.
J_A208.book Seite 256 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Instrument cluster display Driving Engine compartment Practical hints Car care Technical data 256 Mercedes-Benz Mercedes-Benz Checking engine oil level (CLK 320 shown) Wipe oil dipstick clean prior to checking the engine oil level. Fully insert dipstick in tube, and remove after three seconds to obtain accurate reading. Oil level must be between the lower (min) and upper (max) mark of the dipstick.
J_A208.book Seite 257 Donnerstag, 31. Mai 2001 9:35 09 Coolant level Automatic transmission fluid level The transmission has a permanent fill of automatic transmission fluid. Regular automatic transmission fluid level checks and changes are not required. For this reason the dipstick is omitted. If you notice fluid leaks or gear shifting malfunctions, have your authorized Mercedes-Benz Center check the transmission fluid level. P20.
J_A208.book Seite 258 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Engine compartment Adding coolant If coolant has to be added, a 50/50 mixture of water and MB anticorrosion/antifreeze should be added. The drain plugs for the cooling system are located on the right side of the engine block and at the bottom of the radiator. Anticorrosion/antifreeze mixture, see page 323.
J_A208.book Seite 259 Donnerstag, 31. Mai 2001 9:35 09 Windshield washer/headlamp cleaning system Warning! Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/antifreeze on hot engine parts, because it may burn. You can be seriously burned. Windshield and headlamp washer fluid mixing ratio 1 For temperatures above freezing: MB Windshield Washer Concentrate “S” and water. 1 part “S” to 100 parts water (40 ml “S” to 1 gallon water). P82.
J_A208.book Seite 260 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Spare wheel, vehicle jack Spare wheel, vehicle tools, storage compartment Practical hints Car care Technical data 260 Lift trunk floor and engage handle in grip molding of luggage cover. To remove spare tire: Turn luggage bowl counterclockwise and remove. To store spare tire: Place spare tire in wheel well and secure it with luggage bowl.
J_A208.book Seite 261 Donnerstag, 31. Mai 2001 9:35 09 Vehicle jack Warning! The jack is designed exclusively for jacking up the vehicle at the jack tubes built into either side of the vehicle. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change. Never get beneath the vehicle while it is supported by the jack. Keep hands and feet away from the area under the lifted vehicle. Always firmly set parking brake and block wheels before raising vehicle with jack.
J_A208.book Seite 262 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Wheels Replace rims or tires with the same designation, manufacturer and type as shown on the original part. See your authorized Mercedes-Benz Center for further information. See your authorized Mercedes-Benz Center for information on tested and recommended rims and tires for summer and winter operation.
J_A208.book Seite 263 Donnerstag, 31. Mai 2001 9:35 09 Rotating wheels Notes: CLK 430, CLK 55 AMG: Wheel rotation applies only when winter tires are mounted on all four wheels. Thoroughly clean the inner side of the wheels any time you rotate the wheels or wash the vehicle underside. The wheels can be rotated according to the degree of tire wear while retaining the same direction of travel. The use of retread tires is not recommended.
J_A208.book Seite 264 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Spare wheel Spare wheel CLK 320 (except Sport Package) Important! The spare wheel rim is mounted with a full size tire of the same type as on the vehicle, and is fully functional. However, that spare wheel rim is weight optimized and has a limited service life of 12 000 miles (20 000 km) use before a standard wheel rim must replace it.
J_A208.book Seite 265 Donnerstag, 31. Mai 2001 9:35 09 If the arrow on tire side wall does not point in direction of vehicle forward movement when using the spare wheel, observe the following restriction: For rim and tire specifications, refer to “Technical Data” (page 314). Warning! • Drive to the nearest tire repair facility as soon as possible. The spare wheel rim is for temporary use only.
J_A208.book Seite 266 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Changing wheels Practical hints Car care Technical data 266 Move vehicle to a level area which is a safe distance from the roadway. Warning! The jack is designed exclusively for jacking up the vehicle at the jack tubes built into either side of the vehicle. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change.
J_A208.book Seite 267 Donnerstag, 31. Mai 2001 9:35 09 P40.10-2479-26 4. Using the wrench, loosen but do not yet remove the wheel bolts. 5. Remove the protective cover from the jack support tube opening by inserting the screwdriver (supplied in the tool kit) in the opening and prying it out. The tube openings are located directly behind the front wheel housings and in front of the rear wheel housings.
J_A208.book Seite 268 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Practical hints Car care Technical data 268 1 P40.10-2481-26 6. Insert jack arm fully into the tube hole up to the stop. Place jack on firm ground. Position the jack so that it is always vertical (plumb-line) as seen from the side (see arrow), even if the vehicle is parked on an incline. 7. Jack up the vehicle until the wheel is clear of the ground.
J_A208.book Seite 269 Donnerstag, 31. Mai 2001 9:35 09 4 3 5 2 P40.10-2484-26 P40.10-2483-26 10. Clean contact surfaces of wheel and wheel hub. Install wheel on wheel hub. Insert wheel bolts and tighten them slightly. Lower vehicle. Remove jack and insert jack tube cover. 11. Using the wrench, tighten the five bolts evenly, following the sequence illustrated, until all bolts are tight. Observe a tightening torque of 80 ft.lb. (110 Nm).
J_A208.book Seite 270 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Practical hints Car care Technical data 270 Warning! Warning! Always replace wheel bolts that are damaged or rusted. Never apply oil or grease to wheel bolts. The spare wheel rim is for temporary use only. Use for over a total of 12 000 miles (20 000 km) (aggregate of all uses) may cause wheel rim failure leading to an accident and possible injuries.
J_A208.book Seite 271 Donnerstag, 31. Mai 2001 9:35 09 Tire inflation pressure Tire pressures listed for light loads are minimum values offering high driving comfort. Increased inflation pressures for heavy loads produce favorable handling characteristics with lighter loads and are perfectly permissible. The ride of the vehicle, however, will become somewhat harder.
J_A208.book Seite 272 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Battery Practical hints Car care Technical data 272 If a tire constantly loses air, it should be inspected for damage. Battery The spare tire should be checked periodically for condition and inflation. Spare tire will age and become worn over time even if never used, and thus should be inspected and replaced when necessary. Warning! Warning! Do not overinflate tires.
J_A208.book Seite 273 Donnerstag, 31. Mai 2001 9:35 09 Therefore, we strongly recommend that you have the battery charge checked frequently, and corrected if necessary, especially if you use the vehicle less than approximately 200 miles (300 km) per month, mostly for short distance trips, or if it is not used for long periods of time.
J_A208.book Seite 274 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Jump starting Jump starting Warning! Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries while connecting or jump starting, you might get injured. Battery fluid contains sulfuric acid. Do not allow this fluid to come in contact with eyes, skin or clothing.
J_A208.book Seite 275 Donnerstag, 31. Mai 2001 9:35 09 Important! Proceed as follows: 5. Start engine of the vehicle with the charged battery and run at high idle. Make sure the cables are not on or near pulleys, fans, or other parts that move when the engine is started. Allow the discharged battery to charge for a few minutes. Start engine of the disabled vehicle in the usual manner. 1. Position the vehicle with the charged battery so that the jumper cables will reach, but never let the vehicles touch.
J_A208.book Seite 276 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Towing Practical hints Car care Technical data 276 Towing the vehicle Warning! Prior to towing the vehicle with all wheels on the ground, make certain that the electronic key is in steering lock position 2. The maximum towing speed and distance with the vehicle on the ground is 30 mph (50 km/h) and 30 miles (50 km).
J_A208.book Seite 277 Donnerstag, 31. Mai 2001 9:35 09 P88.20-2027-26 P88.20-2026-26 The rear towing eye is located at the right, below the bumper. The front towing eye is located on the passenger side behind a cover in the bumper panel. CLK 320 with Sport Package, CLK 430, CLK 55 AMG: CLK 320 (except Sport Package): Cover installation: Engage left and right end of grille and press in securely. Cover removal: Hold left and right end of grille and pull out.
J_A208.book Seite 278 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Towing Practical hints Car care Technical data 278 We recommend that the vehicle be transported using flat bed equipment. This method is preferable to other types of towing. The vehicle may be towed with all wheels on the ground and the selector lever in position “N” for distances up to 30 miles (50 km) and at a speed not to exceed 30 mph (50 km/h).
J_A208.book Seite 279 Donnerstag, 31. Mai 2001 9:35 09 Transmission selector lever, manually unlocking To do so, insert a pin (1), e.g. ball point pen, into the covered opening below the position “D” of the shift pattern. While pushing the pin down, move selector lever from position “P”. After removal of the pin from the opening, the cover will not close fully. Only after moving the selector lever to positions “D+” and “D–” does the cover return to its closed position.
J_A208.book Seite 280 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Exterior lamps Practical hints Car care Technical data 280 Exterior lamps Notes: Headlamp adjustment To prevent a possible electrical short circuit, switch off lamp prior to replacing a bulb. Correct headlamp adjustment is extremely important. Check and readjust headlamps at regular intervals and when a bulb has been replaced. For adjusting headlamp aim see page 285.
J_A208.book Seite 281 Donnerstag, 31. Mai 2001 9:35 09 Headlamp assembly (Halogen) Headlamp assembly (Xenon) (optional, standard on model CLK 55 AMG) 4 4 1 6 5 1 5 7 7 2 2 3 3 P82.10-2394-26 P82.
J_A208.book Seite 282 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Exterior lamps Practical hints Car care Technical data 282 Bulbs for low or high beam H7 (55 W) Turn signal lamp 1156 NA (26.9/5 W/32/4 cp bulb) Open hood. Open hood. Rotate cover (2 or 3) counterclockwise and remove. Pull off electrical connector (5 or 6). Unhook clamping ring and remove bulb. Twist bulb socket (4) counterclockwise and pull out.
J_A208.book Seite 283 Donnerstag, 31. Mai 2001 9:35 09 Taillamp assemblies 4 1 3 5 2 P82.10-2083-26 P82.10-2080-26 4 Driver’s side: Rear fog lamp (21 W/32 cp bulb) Open trunk lid. Swing cover aside (bulbs 1, 2 and 3). 5 Backup lamp (21 W/32 cp bulb) 1 Turn signal lamp (21 W/24 cp bulb) Twist bulb socket counterclockwise and pull out. Push bulb into socket, turn counterclockwise and remove.
J_A208.book Seite 284 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Exterior lamps Side marker lamp, front (5 W/4 cp bulb) Practical hints Car care Technical data 284 Carefully slide lamp towards front (arrow), and remove back and first. Twist bulb socket counterclockwise and pull out. Push bulb socket, turn counterclockwise and remove. Insert new bulb in socket, push in and twist clockwise. Reinstall bulb socket, push in and twist clockwise.
J_A208.book Seite 285 Donnerstag, 31. Mai 2001 9:35 09 High mounted stop lamp, Additional turn signals on the exterior mirror Adjusting headlamp aim Correct headlamp adjustment is extremely important. To check and readjust a headlamp, follow steps 1 through 5. The high mounted stop lamp (3rd brake lamp), and the additional turn signals on the exterior mirrors are equipped with LEDs. Please note: Have the system checked at an authorized Mercedes-Benz Center if a fault or defect occurs.
J_A208.book Seite 286 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Exterior lamps Practical hints Technical data Car care 286 10 N82.10-2396-26 2. (Low beams on): Using a carpenter’s level, align and mark a vertical centerline (8) on the test screen using the vertex of the angle formed in each beam image. As a check, the distance between centerlines should be 49 1/4 inches (1250 mm).
J_A208.book Seite 287 Donnerstag, 31. Mai 2001 9:35 09 5. Vertical headlamp aim (low beams on): Turn adjusting screw (1) (counterclockwise to adjust headlamp downward, clockwise upward) until the headlamps illuminate the test screen as shown. The vertex of the angle formed in each beam image should align with the vertical and horizontal centerlines (8 and 9). The left and right headlamps must be adjusted individually.
J_A208.book Seite 288 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Electronic key Practical hints Car care Technical data 288 Changing batteries in the electronic key 2 1 3 4 P80.20-2201-26 P80.35-2029-26 1 Transmit buttons Changing batteries 2 Lamp for battery check and function control Move locking tab (3) in direction of right arrow and remove mechanical key (4, left arrow).
J_A208.book Seite 289 Donnerstag, 31. Mai 2001 9:35 09 7 8 5 4 6 P80.35-2025-26 P80.35-2027-26 Insert mechanical key (4) in side opening (5) to open latch. Press briefly (do not use mechanical key as lever) to release battery compartment. Change batteries (7), inserting new ones under contact spring (8) with plus (+) side facing up. Return battery compartment into housing until locked in place and slide mechanical key back into electronic key. Remove mechanical key from side opening.
J_A208.book Seite 290 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Electronic key Practical hints Car care Technical data 290 Important! Synchronizing remote control Batteries contain materials that can harm the environment if disposed of improperly. Recycling of batteries is the preferred method of disposal. For disposal, please follow manufacturer’s recommendation on battery package.
J_A208.book Seite 291 Donnerstag, 31. Mai 2001 9:35 09 Raising soft top manually Important! In case of malfunction, the power soft top can also be raised manually. This procedure should be performed with great care by two persons. Ensure that the trunk lid is closed while raising the soft top manually. Otherwise there is the possibility of contact between the trunk lid and the soft top compartment cover. We recommend to take off your watch or other jewelry to prevent personal injury.
J_A208.book Seite 292 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Emergency operation of soft top Practical hints Technical data Car care 292 1 P65.10-2009-26 5. Unlock soft top storage compartment: Open trunk lid with mechanical key and lift protection cover. Using screwdriver (supplied in vehicle tool kit), turn screw two turns counterclockwise. Close trunk lid.
J_A208.book Seite 293 Donnerstag, 31. Mai 2001 9:35 09 2 4 3 P77.30-2034-26 P77.30-2029-26 7. Open soft top compartment cover (2) and place in upright position. 8. Move soft top toward windshield header (arrow). Warning! Place hands from below on upper section of soft top (3) and pull hard to move soft top (4) out of its storage compartment. Emergency operation of soft top Instruments and controls Operation Do not place your hands in areas marked X. Serious personal injury may occur.
J_A208.book Seite 294 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Instrument cluster display Driving Emergency operation of soft top Practical hints Car care Technical data 294 6 5 4 2 1 P77.30-2030-26 P77.30-2033-26 9. Do not place soft top frame (5) onto windshield header. 10. Place rear window section of soft top (6) in its vertical position. 11. Close soft top compartment cover (2) by placing hands near edges (arrows).
J_A208.book Seite 295 Donnerstag, 31. Mai 2001 9:35 09 6 P77.30-2032-26 15. Insert hex-socket wrench (7) to lock the soft top bow. 13. Lower rear window section of soft top (6). Press soft top bow down onto soft top compartment cover. 14. Open trunk lid with mechanical key and carefully guide luggage cover (page 250) into its storage compartment. Emergency operation of soft top Instruments and controls Operation Insert and turn wrench in direction of arrow (8) to lock soft top bow.
J_A208.book Seite 296 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Emergency operation of soft top Practical hints Car care Technical data 296 10 9 P65.10-2009-26 16. Using screwdriver (supplied in vehicle tool kit), turn screw clockwise to the stop. 17. Close trunk lid. Important! Do not place mechanical key inside trunk, since trunk is locked again when closing the lid. 18. Press lock button (9) and fold down locking handle (10).
J_A208.book Seite 297 Donnerstag, 31. Mai 2001 9:35 09 19. Turn locking handle 90° clockwise and pull soft top frame carefully down until it meets the windshield header attachment points. Turn locking handle counterclockwise to the stop to lock the soft top. Fold locking handle up until lock button engages. Note: Have the soft top operation checked at your authorized Mercedes-Benz Center as soon as possible.
J_A208.book Seite 298 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Emergency operation of soft top Antenna Practical hints Car care Technical data 298 Do not use tools (e.g. pliers) for the antenna mast removal. To remove: Unscrew antenna counterclockwise (1). To install: Carefully position antenna mast on threaded socket and turn clockwise (2) until hand tight.
J_A208.book Seite 299 Donnerstag, 31. Mai 2001 9:35 09 Replacing wiper blade insert Manual release for fuel filler flap For safety reasons, remove electronic key from steering lock before replacing the wiper blade, otherwise the motor can suddenly turn on and cause injury. Notes: Do not open engine hood with wiper arm folded forward. Do not allow the wiper arm to contact the windshield glass without a wiper blade inserted. The glass may be scratched or broken.
J_A208.book Seite 300 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Replacing wiper blade insert Practical hints Car care Technical data 300 1 2 3 P82.30-0333-26 Removal: Installation: Fold wiper arm forward. Press safety tab down (1), push wiper blade downward (2) and remove. Slide (direction of arrow) wiper blade insert into retainer claws until tabs are engaged. Place wiper blade on firm support.
J_A208.book Seite 301 Donnerstag, 31. Mai 2001 9:35 09 Vehicle care Cleaning and care of the vehicle .............................302 Power washer ..............................303 Paintwork, painted body components .................................303 Engine cleaning ..........................304 Tar stains .....................................304 Vehicle washing .........................304 Ornamental moldings ................304 Headlamps, taillamps, turn signal lenses ......................
J_A208.book Seite 302 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Cleaning and care of the vehicle Cleaning and care of the vehicle Warning! Many cleaning products can be hazardous. Some are poisonous, others are flammable. Always follow the instructions on the particular container. Always open your vehicle’s doors or windows when cleaning the inside. Never use fluids or solvents that are not designed for cleaning your vehicle.
J_A208.book Seite 303 Donnerstag, 31. Mai 2001 9:35 09 Paintwork, painted body components Scratches, corrosive deposits, corrosion or damage due to negligent or incorrect care cannot always be removed or repaired with the car-care products recommended here. In such cases it is best to seek aid at your authorized Mercedes-Benz Center.
J_A208.book Seite 304 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Cleaning and care of the vehicle Practical hints Car care Technical data 304 Engine cleaning Vehicle washing Prior to cleaning the engine compartment make sure to protect electrical components and connectors from the intrusion of water and cleaning agents. Do not use hot water or wash your vehicle in direct sunlight.
J_A208.book Seite 305 Donnerstag, 31. Mai 2001 9:35 09 Headlamps, taillamps, turn signal lenses Wiper blade Use a mild car wash detergent, such as Mercedes-Benz approved Car Shampoo, with plenty of water. Clean the wiper blade rubber with a clean cloth and detergent solution. To prevent scratches, never apply strong force and use only a soft, non-scratchy cloth when cleaning the lenses. Do not attempt to wipe dirty lenses with a dry cloth or sponge.
J_A208.book Seite 306 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Cleaning and care of the vehicle Practical hints Car care Technical data 306 Instrument cluster Seat belts Use a gentle dishwashing detergent or mild detergent for delicate fabrics as a washing solution. Wipe with a cloth moistened in lukewarm solution. Do not use scouring agents. The webbing must not be treated with chemical cleaning agents.
J_A208.book Seite 307 Donnerstag, 31. Mai 2001 9:35 09 Upholstery Hard plastic trim items Using aftermarket seat covers or wearing clothing that have the tendency to give off coloring (e.g. when wet etc.) may cause the upholstery to become permanently discolored. By lining the seats with a proper intermediate cover, contact-discoloration will be prevented. Pour Mercedes-Benz approved Interior Care onto soft lint-free cloth and apply with light pressure.
J_A208.book Seite 308 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Cleaning and care of the vehicle Practical hints Car care Technical data 308 Soft top Notes: Clean soft top with soft top raised and locked. Lower the soft top into the storage compartment only if the soft top is completely dry. If the soft top is kept in the storage compartment for a lengthy period, raise it and air out with the windows open about every 4 months.
J_A208.book Seite 309 Donnerstag, 31. Mai 2001 9:35 09 Technical data Spare parts service ........................ 310 Warranty coverage ......................... 310 Identification labels ....................... 311 Layout of poly-V-belt drive ............ 312 Technical data ................................ 313 Fuels, coolants, lubricants etc. – capacities ................................... 318 Engine oils ......................................
J_A208.book Seite 310 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Technical data Practical hints Car care Technical data 310 Spare parts service Warranty coverage All authorized Mercedes-Benz Centers maintain a stock of original spare parts required for maintenance and repair work. In addition, strategically located parts distribution centers provide quick and reliable parts service.
J_A208.book Seite 311 Donnerstag, 31. Mai 2001 9:35 09 Identification labels XX XX XX XX X 1 2 1 Certification label 2 Vehicle Identification Number (VIN) When ordering spare parts, please specify vehicle identification and engine numbers.
J_A208.book Seite 312 Donnerstag, 31.
J_A208.book Seite 313 Donnerstag, 31. Mai 2001 9:35 09 Technical data Model CLK 320 (208 465)1 CLK 430 (208 470)1 CLK 55 AMG (208 474)1 Engine 112 113 113 Mode of operation 4-stroke engine, gasoline injection 4-stroke engine, gasoline injection 4-stroke engine, gasoline injection No. of cylinders 6 8 8 Bore 3.54 in (89.90 mm) 3.54 in (89.90 mm) 3.82 in (97.00 mm) Stroke 3.31 in (84.00 mm) 3.31 in (84.00 mm) 3 3.60 in (92.00 mm) 3 Total piston displacement 195.2 cu.in.
J_A208.book Seite 314 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Technical data Practical hints Car care Technical data 314 Rims – Tires (except Sport Package) Rims – Tires (Sport Package) Model CLK 320 Model CLK 320 Rims (light alloy) Wheel offset 7 J x 16 H 2 1.46 in (37 mm) All season tires: Radial-ply tires Rims front axle (AMG light alloy) Wheel offset 71/2 J x 17 H 2 1.
J_A208.book Seite 315 Donnerstag, 31. Mai 2001 9:35 09 Model CLK 430 CLK 55 AMG Rims front axle (AMG light alloy) Wheel offset: 71/2 J x 17 H 2 1.46 in (37 mm) 71/2 J x 17 H 2 1.46 in (37 mm) Rims rear axle (AMG light alloy) Wheel offset: 81/2 J x 17 H 2 1.18 in (30 mm) 81/2 J x 17 H 2 1.
J_A208.book Seite 316 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Technical data Practical hints Car care Technical data 316 Rims – Winter tires Model CLK 430 CLK 55 AMG Rim (light alloy) Wheel offset 7 J x 16 H 2 1.46 in (37 mm) 71/2 J x 17 H 2 1.
J_A208.book Seite 317 Donnerstag, 31. Mai 2001 9:35 09 Weights (see certification tag) Trunk load max. 220 lb (100 kg) Main dimensions Model CLK 320 CLK 55 AMG Overall vehicle length 180.2 in (4577 mm) 179.8 in (4567 mm) 179.8 in (4567 mm) Overall vehicle width 67.8 in (1722 mm) 67.8 in (1722 mm) 67.8 in (1722 mm) Overall height 54.3 in (1380 mm) 54.3 in (1380 mm) 54.6 in (1386 mm) Wheel base 105.9 in (2690 mm) 105.9 in (2690 mm) 105.9 in (2690 mm) Track, front 59.3 in (1505 mm) 59.
J_A208.book Seite 318 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Fuels, coolants, lubricants etc. - capacities Practical hints Car care Technical data 318 Fuels, coolants, lubricants etc. – capacities Vehicle components and their respective lubricants must match. Therefore use only brands tested and recommended by us. Please refer to the Factory Approved Service Products pamphlet, or inquire at your Mercedes-Benz Center.
J_A208.book Seite 319 Donnerstag, 31. Mai 2001 9:35 09 Fuels, coolants, lubricants etc. Model Capacity Windshield washer system (MB Windshield washer concentrate “S” 1) approx. 7.4 US qt (7.0 l) Fuel tank including a reserve of (Premium unleaded gasoline: Posted Octane 91 (Avg. of 96 RON/86 MON)) approx. 16.4 US gal (62.0 l) approx. 2.1 US gal (8.
J_A208.book Seite 320 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Fuels, coolants, lubricants etc. Practical hints Car care Technical data 320 Engine oils Air conditioner refrigerant Engine oils are specifically tested for their suitability in our engines. Therefore, use only engine oils recommended by Mercedes-Benz. Information on recommended brands is available at your authorized Mercedes-Benz Center.
J_A208.book Seite 321 Donnerstag, 31. Mai 2001 9:35 09 Premium unleaded gasoline Fuel requirements Caution! Use only Premium unleaded meeting ASTM standard D 439: To maintain the engine’s durability and performance, premium unleaded gasoline must be used. If premium unleaded is not available and low octane fuel is used, follow these precautions: The octane number (posted at the pump) must be 91 min. It is an average of both the Research (R) octane number and the Motor (M) octane number: [(R+M)/2].
J_A208.book Seite 322 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Fuels, coolants, lubricants etc. Practical hints Car care Technical data 322 Gasoline additives Coolants A major concern among engine manufacturers is carbon build up caused by gasoline. Mercedes-Benz recommends the use of only quality gasoline containing additives that prevent the build up of carbon deposits.
J_A208.book Seite 323 Donnerstag, 31. Mai 2001 9:35 09 Before the start of the winter season (or once a year in the hot southern regions), you should have the anticorrosion/antifreeze concentration checked. The coolant is also regularly checked each time you bring your vehicle to your authorized Mercedes-Benz Center for service. the engine temperature will increase due to the lower heat transfer capability of the solution. Therefore, do not use more than this amount of anticorrosion/antifreeze.
J_A208.book Seite 324 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Consumer information Practical hints Car care Technical data 324 Consumer information This has been prepared as required of all manufactures of passenger cars under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the “National Traffic and Motor Vehicle Safety Act of 1966”.
J_A208.book Seite 325 Donnerstag, 31. Mai 2001 9:35 09 Temperature The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
J_A208.book Seite 326 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 326 Index A ABS (Antilock brake system) ....................................... 218 Malfunction indicator lamp ..................................... 231 ABS-SYSTEM - malfunction and warning messages ............................................237 Adjusting headlamp aim ...............................................
J_A208.book Seite 327 Donnerstag, 31. Mai 2001 9:35 09 BATTERY/ALTERNATOR malfunction and warning messages ..................... 236 Block heater .................................................................... 213 BRAKE ASSIST - malfunction and warning messages ............................................ 237 Brake assist system (BAS) ............................................ 216 Malfunction indicator lamp .....................................231 Brake fluid ........................................
J_A208.book Seite 328 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 328 CD changer See Audio system ...................................................... 140 Cellular telephone ......................................................... 157 Center console .................................................................. 20 Central locking switch ....................................................
J_A208.book Seite 329 Donnerstag, 31. Mai 2001 9:35 09 Emission control label ................................................... 312 Engine compartment .................................................... 254 ENGINE FAN - malfunction and warning messages ................................................... 239 Engine malfunction CHECK ENGINE malfunction indicator lamp ...... 228 Engine oil additives ...................................................... 320 Engine oil consumption ..........................
J_A208.book Seite 330 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 330 Exterior lamp malfunction and warning message ..............................................242 Exterior lamp switch ......................................................114 Exterior lamps ................................................................280 Adjusting headlamp aim ..........................................
J_A208.book Seite 331 Donnerstag, 31. Mai 2001 9:35 09 H Indicator lamps ............................................................84 Instrument lamps .............................................................85 Instruments and controls ............................................... 18 Interior General notes ............................................................. 151 Interior lighting ..............................................................149 Hazard warning flasher switch .............
J_A208.book Seite 332 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 332 Replacing bulbs .........................................................280 Side marker lamp, front ...........................................284 Standing lamps ..................................................114, 282 Taillamp assemblies .........................................114, 283 Turn signal lamps ..................
J_A208.book Seite 333 Donnerstag, 31. Mai 2001 9:35 09 P Mirror, exterior, rear view .............................................. 79 Mirror, inside, rear view .................................................78 Multicontour seat ............................................................55 Multifunction display ......................................................88 Engine oil level indicator ...........................................92 FSS (Flexible service system) ..................................
J_A208.book Seite 334 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 334 Rear view mirrors Exterior .........................................................................79 Inside ............................................................................ 78 Rear window defroster .................................................. 124 Remote control ..............................................
J_A208.book Seite 335 Donnerstag, 31. Mai 2001 9:35 09 Setting the audio volume .............................................. 108 Shelf below rear window ..............................................250 Side marker lamp ..........................................................284 Snow chains .................................................................... 211 Soft top ............................................................................ 162 Emergency operation ................................
J_A208.book Seite 336 Donnerstag, 31. Mai 2001 9:35 09 Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 336 TELE AID - malfunction and warning messages ............................................247 Telephone ..........................................................................96 General notes ............................................................. 157 Incoming call .......................................................
J_A208.book Seite 337 Donnerstag, 31. Mai 2001 9:35 09 W Where to find it ................................................................ 13 Wind screen ....................................................................170 Windows See Power windows ...................................................146 Windshield washer/headlamp cleaning system Refilling ..................................................................... 259 Winter driving .............................................................
J_A208.book Seite 338 Donnerstag, 31.
J_A208.book Seite 339 Donnerstag, 31.
J_A208.book Seite 340 Donnerstag, 31.
J_A208.book Seite 341 Donnerstag, 31. Mai 2001 9:35 09 Service and Literature Your authorized Mercedes-Benz Center has trained technicians and original Mercedes-Benz parts to service your vehicle properly. For expert advice and quality service, see your authorized Mercedes-Benz Center. If your are interested in obtaining service literature for your vehicle, please contact your authorized Mercedes-Benz Center. We consider this the best way for you to obtain accurate information for your vehicle.
J_A208.book Seite 342 Donnerstag, 31. Mai 2001 9:35 09 Order No. 6515 1244 13 Part No.
Please observe the following: BOOKSPINE for Operator’s Manual 5 /8 in (1.6 cm) 208 A 3.5 in (8.