Operator`s manual

228
Controls in detail
Audio system
Muting a call
It is possible to mute a call; the caller is
then no longer able to hear you.
앫 Mute on
왘 Press MUT soft key.
왘 MIC MUTE will appear in the display.
앫 Mute off
왘 Press MUT soft key again.
Terminating a call
왘 Press t button.
The current call is terminated and the
muted audio source becomes active
again.
Accepting a second incoming call
If you receive another call during an
already active call, you can accept the
second call and switch between the two.
앫 Accepting a second call
왘 Place new call by entering
telephone number manually.
You are connected to the second
caller; the first caller is kept on hold.
앫 Switching between calls
왘 Press s button.
This switches between the calls.
The non-active call is kept on hold.
앫 Terminating a call
왘 Press t button.
The current call is terminated. The
connection to the caller previously
kept on hold is also interrupted;
however, reconnection is indicated
by an acoustic signal.
i
You will be notified of the second call
acoustically, but you will not see this in
the display.