Owners Manual

Activating/deactivating PRE-SAFE
®
Brake
PRE-SAFE
®
Brake is only available in vehicles
with DISTRONIC PLUS.
X
Press = or
; on the steering wheel
to select the DriveAssist menu.
X
Press the 9 or : button to select
PRE-SAFE Brake.
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
When PRE-SAFE
®
Brake is activated, the
multifunction
display shows the Ä
symbol
as long as the HOLD function is not activated
(Y page 196).
Vehicles with Parking Guidance: if
PARKTRONIC is activated and you are driving
at a speed under 22 mph (35km/h) the j
symbol for Parking Guidance is displayed
instead of the Ä symbol (Y page 205)
If the PRE-SAFE Brake: Sensors
Deactivated message appears, the radar
sensor system is deactivated.
X
Switch on the radar sensor system
(Y page 241).
For more information on PRE-SAFE
®
Brake,
see (Y page 72).
Activating/deactivating ATTENTION
ASSIST
X
Press = or ; on the steering wheel
to select the DriveAssist menu.
X
Press 9 or : to select Attention
Assist.
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
When ATTENTION ASSIST is activated, the
À symbol appears in the multifunction
display when the ignition is on.
For further information about ATTENTION
ASSIST, see (Y page 210).
Activating/deactivating Blind Spot
Assist
X
Press = or ; on the steering wheel
to select the DriveAssist menu.
X
Press the 9 or : button to select
Blind Spot Asst..
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
If the Blind Spot Assist Sensors
Deactivated or Act. Blind Spot Asst.
Sensors Deactivated message appears,
the radar sensor system is deactivated.
X
Switch on the radar sensor system
(Y page 241).
For further information about Blind Spot
Assist, see (Y page 214).
For further information about Active Blind
Spot Assist, see (Y page 218).
Activating/deactivating Lane Keeping
Assist
X
Press = or ; on the steering wheel
to select the DriveAssist menu.
X
Press the 9 or : button to select
Lane Keep. Asst.
X
Press the a button.
The current selection is displayed.
X
Press a to confirm.
When Lane Keeping Assist or Active Lane
Keeping
Assist is activated,
the à symbol
appears in the multifunction display when the
ignition is on.
For further information about Active Lane
Keeping Assist, see (Y page 221).
Menus and submenus
237
On-board computer and displays
Z