User's Manual

151
Controls in detail
Control system
After entering the vehicle, the steering
wheel and seat will move into the position
stored in memory when
앫 the driver’s door is closed
앫 you put the SmartKey in the starter
switch or press the KEYLESS-GO
start/stop button*
앫 you press the appropriate stored posi-
tion button on the memory switch
(
컄 page 117).
왘 Move the selection marker with
the æ or ç button to
the
Convenience submenu.
왘 Press button j or k repeatedly
until you see this message in the dis-
play:
Function Easy-entry feature .
The selection marker is on the current
setting.
왘 Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for the
easy-entry/ exit feature
Warning! G
You must make sure that no one can be-
come trapped or injured by the moving
steering wheel and the driver’s seat when
the easy-entry/exit feature is in operation
and the driver’s door is being opened or the
SmartKey is removed from the starter
switch.
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or personal injury.
i
To cancel seat/steering wheel move-
ment, do one of the following:
앫 Press seat adjustment switch
(
컄 page 35).
앫 Move the steering column stalk
(
컄 page 37).
앫 Press the memory button
(
컄 page 117).
off The
easy-entry/exit
feature is deactivat-
ed
Steering col. Only the steering
column is moved.
Steering col. +
seat
Both the steering
column and the
seat are moved.