User's Manual

362
Practical hints
Replacing bulbs
High beam halogen bulb
왘 Switch off the lights.
왘 Open the hood (컄 page 281).
왘 Press the clamp and remove headlamp
cover.
왘 Pull electrical connector off.
왘 Turn the locking mechanism counter-
clockwise and take out the high beam
bulb 2.
왘 Insert the new bulb in the socket so
that the base is in the recess on the
lower left.
왘 Attach the retaining springs.
왘 Insert connector into the bulb.
왘 Align headlamp cover and click into
place.
Front turn signal lamp bulb
왘 Switch off the lights.
왘 Open the hood (컄 page 281).
왘 Twist bulb socket 1 counterclockwise
and pull out.
왘 Push bulb into socket, turn counter-
clockwise and remove.
왘 Insert new bulb in socket, push in and
twist clockwise.
왘 Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
왘 Switch off the lights.
왘 Open the hood (컄 page 281).
왘 Press the clamp and remove headlamp
cover.
왘 Pull out the bulb socket 3 with the
bulb.
왘 Pull the bulb out of the bulb socket.
왘 Insert a new bulb in the socket.
왘 Reinstall the bulb socket.
왘 Align headlamp cover and click into
place.