Operating instructions

Audio system features
i
These Operating Instructions describe all
standard and optional equipment available
for your audio device at the time of going
to print. Country-specific deviations are
possible. Please note that your audio equip-
ment may not offer all the features descri-
bed.
Radio mode
Important notes
Portable electronic devices in the vehicle may
seriously impair radio reception.
Introduction
i
Information about operating Audio 20 can
be found in the "At a glance" section
(Y page 19).
The sound settings can be found in the
"Basic functions of Audio 20" section
(Y page 21).
i
Portable electronic devices in the vehicle
may seriously impair radio reception.
Switching to radio mode
Switching on using the $$ button
X
Press the $ button.
The radio display appears.
Radio mode: you will hear the last station
played on the last waveband selected.
i
Repeatedly pressing the $ button
switches between the FM, AM and WB
wavebands in that order and then calls up
satellite radio mode. Pressing the button
again takes you back to FM radio mode.
Switching modes via the audio menu
X
Select AudioAudio from the main function bar
using the controller (slide ZV and turn
cVd) and press W to confirm.
If radio mode was the last mode selected,
it will now be active.
If another audio mode is switched on, you
can now switch to radio mode in the audio
menu.
Radio display
Radio display
:
Main function bar
;
Display showing station name (if availa-
ble)
=
Frequency of the selected station
?
Display/selection window showing sta-
tion name or frequency
A
Sound settings
B
To switch between FM, AM, WB and sat-
ellite radio
C
To display radio text
D
Memory functions
E
Radio functions
F
HD Radio logo (only with HD Radio recep-
tion)
i
If the station supports radio text and infor-
mation is available, the system shows it
below the display/selection window.
60
Radio mode
Audio