Operating instructions

Loading empty magazine trays
X
Press the V load button.
The magazine menu appears. The last tray
selected is identified by a red digit.
X
In the menu bar, select Fill Empty
Slots using the = or ; button and
press the 9 button to confirm.
You see the message: Please Insert
Disc <x>
i
Only insert a CD when Audio 20 prompts
you to do so. Only insert one CD per
magazine tray.
X
Insert a disc into the slot with the printed
side facing upwards.
You see the Please Wait... message. If
the disc has been loaded, the CD changer
switches to the next empty magazine tray.
You see the message: Please Insert
Disc <x>
X
Repeat this step until all trays are loaded.
The CD changer plays the last disc you
loaded if it has been inserted correctly and
it is a permissible type. If the loading
process is not completed, Audio 20 plays
the data carrier that was loaded first.
X
To complete loading: press the V load
button again.
or
X
Press the k button.
Ejecting a disc
Important safety note
G
WARNING
Only eject a disc when the vehicle is
stationary. Otherwise, you may be distracted
from the traffic conditions and could cause an
accident.
Ejecting discs from the CD changer
Note
i
If you eject one disc while playing another
disc, the CD changer interrupts playback.
Playback continues once the disc has been
ejected.
Ejecting a disc
:
Eject/load button (all magazine trays)
;
Disc slot
X
Press the V eject button.
The magazine menu appears. The magazine
tray with the current disc is highlighted.
:
Magazine tray contains a disc; eject
function is available
;
Magazine tray is empty; loading function
is available
X
To select a magazine tray containing a
disc: press the = or ; button and
confirm by pressing the 9 button.
or
X
Press the number of a loaded magazine tray
on the number keypad.
You see the Ejecting Disc <x>...
message.
Afterwards, you will see the following
message:
40
Audio CD and MP3 mode
Audio