Operator`s manual

Radio mode
20
Audio
or
E Press the l button on the keypad of
the control panel briefly.
The Enter Frequency submenu ap-
pears.
E To enter a frequency: press the number
buttons on the keypad of the control pan-
el.
Audio 20 sets the frequency entered.
+ It is not possible to enter a frequency in
the respective waveband which is outside
the frequency range. Frequencies within
the current frequency range, but outside
the current frequency step width are
rounded to the next lower allowed frequen-
cy.
You can save up to 10 FM and 10 AM sta-
tions.
+ If you select a memory preset which is al-
ready in use, it will be overwritten by the
new station.
Saving stations manually
Storing directly using the keypad
E Press and hold a number button, e.g. 4,
until a brief signal tone sounds.
The currently set station is stored.
By calling up the station memory menu
E Select Presets in the radio display.
or
E Press the 9 button when the main area
of the display is active.
Both of these will bring up the station
memory. The # dot in front of a preset
position indicates that the currently se-
lected station is stored there.
Station memory (example)
E
Selecting a memory position: Press the
9 or : button.
E Storing a station to a selected memo-
ry position: Press the 9 button until a
brief signal tone sounds.
or
E Press and hold a number button, e.g. 4, in
the radio display until a brief signal tone
sounds.
The station is stored.
Storing using Autostore
+ This function is not available for Weather
Band (WB).
This function automatically stores stations
which can be received in order of their recep-
tion quality at the moment of performing the
Storing a station