Operator`s manual

Audio CD and MP3 mode
24
Audio
E Press a number key (1-6).
The CD changer switches to the selected
magazine tray. You see the
Please
Wait...
message.
When the magazine tray is ready, you see
the
Please Insert Disc <x> message.
+ Only insert a CD when Audio 20 prompts
you to do so. Never insert more than one
CD at a time into each magazine tray.
E Insert a disc into the slot with the printed
side facing upwards.
The CD changer loads the disc into the
selected magazine tray. You see the mes-
sage:
Loading Disc <x>... .
+ The loading process depends on the disc
type and may take a while. If no disc is in-
serted for approximately 20 seconds, the
display returns to the Magazine menu.
The CD changer plays the first disc you load-
ed if it has been inserted correctly and if it is
a permissible type.
E To exit the menu: press the V load
button again.
or
E Press the % button.
Filling empty magazine trays
E
Press the V load button.
The Magazine menu appears. The last
tray selected is identified by a red digit.
E Select Fill Empty Slots .
You see the
Please Insert Disc <x>
message.
+ Only insert a CD when Audio 20 prompts
you to do so. Never insert more than one
CD at a time into each magazine tray.
E Insert a disc into the slot with the printed
side facing upwards.
You see the
Please wait... message.
When the disc has been loaded, the CD
changer selects the next empty tray. You
see the
Please Insert Disc <x> mes-
sage.
E Repeat this step until all trays are loaded.
The CD changer plays the last disc you
loaded if it has been inserted correctly
and if it is a permissible type. If the load-
ing process is not completed, Audio 20
plays the disc that was loaded first.
E To complete loading: press the V
load button again.
or
E Press the % button.
: Magazine tray contains a disc; eject
function is available
; Empty magazine tray; load function
is available