Operator`s manual

Using the telephone
42
Telephone
If the caller’s name and number are among
the entries in the audio system’s phone book
and the caller has not withheld this informa-
tion, it will appear on the display.
If the caller withholds this information, you
will see:
E To accept: Press the 9 button (Ac-
cept is selected).
or
E Press the 6 button on Audio 20 con-
trol unit or on the steering wheel.
E To reject: Press the = button to se-
lect
Reject, and press the 9 button to
confirm.
or
E Press the ~ button on Audio 20 con-
trol unit or on the steering wheel.
Once you have accepted the call, you can
conduct your telephone call using the hands-
free system. The call volume can be adjusted
(
e page 14).
For more information, see the "Functions
during a single call connection" section
(e page 44).
+ You can also accept a call as described
above, even if the Audio 20 display is
showing one of the other operating modes.
The display switches to the telephone dis-
play after you accept the call. After the call
has been ended, the Audio 20 display
shows the previously selected mode again.
E Press the % function button to call up
the telephone mode.
When the cell phone is ready for opera-
tion, the display will look similar like this:
Initiating an outgoing call
Entering the phone number using the
keypad on the control unit
E To enter digits, select the required digits
in sequence.
E To delete individual digits: Press the
j button briefly.
E To delete an entire number: Press and
hold the j button until all digits have
been deleted.
or
E Press the ~ button on Audio 20 con-
trol unit or on the steering wheel.
E To make a call: Press the 6 button
on Audio 20 control unit or on the steer-
ing wheel.
Entering a telephone number using the
Telephone main menu
In addition to the actual menu bar, the tele-
phone main menu features a second bar con-
taining numbers, the number menu.
When the bar is active (highlighted), you can
select elements.
Making calls