E-class Operator’s Manual
E 320 E 430 E 55 AMG
Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Further, it exemplifies your desire to own an automobile that will be as easy as possible to operate and provide years of service. Your Mercedes-Benz represents the efforts of many skilled engineers and craftsmen.
Introduction Product information .......................... 7 Operator’s manual ............................. 8 Where to find it ................................ 13 Reporting Safety Defects ................ 15 Instruments and controls Instruments and controls ............... 18 Center console ..............................20 Overhead control panel ............... 21 Operation Vehicle keys ...................................... 24 Start lock-out ....................................
Contents 2 Audio systems ..................................97 Radio ..............................................97 CD player .......................................98 Cassette player .............................99 Telephone ........................................ 100 Telephone book .......................... 100 Redialing ..................................... 102 Incoming call .............................. 104 Navigation system .......................... 105 Trip computer ............................
Shelf below rear window .............. 170 Garage door opener ....................... 171 Driving Control and operation of radio transmitters ................ 176 The first 1 000 miles (1 500 km) ................................. 177 Maintenance ................................... 177 Tele Aid ........................................... 178 Catalytic converter ........................ 188 Emission control ............................ 189 Steering lock ...................................
Contents 4 AIRBAG OFF indicator lamp .............................238 Malfunction and warning messages in the multifunction display ...............239 DISPLAY DEFECTIVE ................240 BATTERY / ALTERNATOR ......... 241 ABS-SYSTEM ...............................242 BRAKE ASSIST ...........................242 BRAKE LINING WEAR ..............243 BRAKE FLUID .............................243 PARKING BRAKE .......................244 ENGINE FAN ...............................244 COOLANT (coolant level) ....
Vehicle care Cleaning and care of the vehicle .............................300 Power washer ..............................301 Tar stains .....................................301 Paintwork, painted body components .................................301 Engine cleaning ..........................302 Vehicle washing .........................302 Ornamental moldings ................302 Headlamps, taillamps, turn signal lenses ......................302 Cleaning the parktronic system sensors .........................
Product information Kindly observe the following in your own best interest: We recommend using Mercedes-Benz original parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and their special suitability for Mercedes-Benz vehicles.
Introduction 8 Operator’s manual This Operator’s Manual contains a great deal of useful information. We urge you to read it carefully and familiarize yourself with the vehicle before driving. For your own safety and longer service life of the vehicle, we urge you to follow the instructions and warnings contained in this manual. Ignoring them could result in damage to the vehicle or personal injury to you or others.
Important notice for California retail buyers of Mercedes-Benz automobiles Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price, if Mercedes-Benz USA, LLC or its authorized Mercedes-Benz Center fails to conform the vehicle to its express warranties after a reasonable number of repair attempts during the period of one year or 12 000 miles from original delivery of the vehicle.
Introduction 10 Roadside assistance The Mercedes-Benz Roadside Assistance Program provides factory trained technical help in the event of a breakdown. Calls to the toll-free Roadside Assistance number: 1-800-FOR-MERCedes (in the USA) 1-800-387-0100 (in Canada) will be answered by Mercedes-Benz Client Assistance Representatives 24 hours a day, 365 days a year. For additional information refer to the Mercedes-Benz Roadside Assistance Program brochure in your glove box.
Operating your vehicle outside the USA or Canada If you plan to operate your vehicle in foreign countries, please be aware that: • Service facilities or replacement parts may not be readily available, • unleaded gasoline for vehicles with catalytic converters may not be available; the use of leaded fuels will damage the catalysts, • gasoline may have a considerably lower octane rating, and improper fuel can cause engine damage.
Introduction 12 We continuously strive to improve our product, and ask for your understanding that we reserve the right to make changes in design and equipment. Therefore, information, illustrations and descriptions in this Operator’s Manual might differ from your vehicle. Optional equipment is also described in this manual, including operating instructions wherever necessary.
Where to find it The Operator’s Manual is divided into eight sections: • Instruments and controls: An overview of all the controls that can be operated from the driver’s seat. • Operation: Information on the vehicle’s equipment and its operation. • Driving: Important information on driving. • Instrument cluster display: Displays and indicator lamps on the instrument cluster with brief instructions. • Practical hints: Assistance and instructions in the event of an emergency.
Introduction 14 Problems with your vehicle If you should experience a problem with your vehicle, particularly one that you believe may affect its safe operation, we urge you to immediately contact your authorized Mercedes-Benz Center to have the problem diagnosed and corrected if required.
For the USA only: The following text is published as required of manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the “National Traffic and Motor Vehicle Safety Act of 1966”. Reporting Safety Defects If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Mercedes-Benz USA, LLC.
Instruments and controls Instruments and controls ............... 18 Center console ..............................20 Overhead control panel ...............
Instruments and controls Operation Driving Instrument cluster display Instruments and controls Practical hints Car care Technical data 18 Instruments and controls 2 9 4 10 13 3 14 16 17 18 5 14 15 20 21 22 23 19 12 8 24 11 6 25 7 26 P68.
1 Parking assist warning indicators, see page 226 15 Air volume control for center air outlets 2 Side defroster outlet 16 Left front seat heater switch, see page 55 Left front seat ventilation switch, see page 58 3 Side air outlet, adjustable 17 Headlamp washer switch, see page 121 4 Air volume control for side air outlet 18 Rear seat head restraints switch, see page 53 5 Exterior lamp switch, see page 119 19 Hazard warning flasher switch, see page 125 6 Parking brake release, see page 202 20 Cen
Instruments and controls Operation Driving Instrument cluster display Instruments and controls Practical hints Car care Technical data 20 Center console 1 Ashtray with lighter, see page 166 2 ESP control switch, see page 220 3 Power window switches, front doors, see page 154 4 Power window safety switch, rear doors, see page 154 5 Airbag Off indicator lamp, see page 238 1 6 Power window switches, rear doors, see page 154 7 Parktronic system deactivation switch, see page 228 2 8 Trunk lid releas
Overhead control panel 1 Interior lighting, see page 159 2 Sliding/pop-up roof, see page 156 3 Rear view mirror, see page 82 4 Garage door opener, see page 171 5 Tele Aid (emergency call system), see page 178 6 Hands free microphone for Tele Aid, telephone and voice recognition system 5 6 Instruments and controls Instruments and controls Operation 21 Driving Instrument cluster display Practical hints Car care Technical data Index
Instruments and controls Operation Driving Contents - Operation Operation Vehicle keys ...................................... 24 Start lock-out ....................................27 General notes on the central locking system ...............28 Central locking system ................... 29 Radio frequency and infrared remote control ...............29 Opening the trunk ....................... 32 Opening and closing windows and sliding/pop-up roof from outside .......................... 33 Panic button ..
Malfunction message memory ...................................... 108 Individual settings ..........................110 Setting the audio volume ...............113 Flexible service system (FSS) .............................................114 Engine oil level indicator ...............117 Engine oil consumption .................118 Exterior lamp switch ......................119 Night security illumination .........120 Headlamp cleaning system .......... 121 Combination switch ......................
Instruments and controls Operation Driving Instrument cluster display Practical hints Car care Technical data 24 Vehicle keys Warning! Included with your vehicle are: When leaving the vehicle always remove the electronic key from the steering lock, and lock your vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause serious personal injury.
Electronic main key When using the mechanical key (2) for lock operations, it can be removed by sliding it out of the remote control. To do so, move locking tab (3) to the right and slide the mechanical key (2) in direction of arrow (4). The remote control transmitter is located in the electronic main key. 1 The infrared receivers are located in the front door handles. Note: 3 Remove the mechanical key from the electronic main key when using valet parking service.
Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 26 Electronic reserve key The electronic reserve key (1) works only in the steering lock. There are no batteries inside the electronic reserve key. The mechanical key (2) works only in the driver’s door, trunk (tailgate), and storage compartment locks. 1 To use the mechanical key (2), remove it from its electronic reserve key (1). Note: P80.
Obtaining replacement keys Start lock-out Your vehicle is equipped with a theft deterrent locking system requiring a special key manufacturing process. For security reasons, replacement keys can only be obtained from your authorized Mercedes-Benz Center. Important! Removing the electronic key from the steering lock activates the start lock-out. The engine cannot be started. Inserting the electronic key in the steering lock deactivates the start lock-out.
Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 28 General notes on the central locking system Important! If the electronic key is inserted in the steering lock, the vehicle cannot be locked or unlocked with the remote control. When unlocking the driver’s door with the mechanical key, the exterior lamps will flash and the alarm will sound.
Central locking system 4 Radio frequency and infrared remote control 3 The electronic main key has an integrated radio frequency and infrared remote control. 2 1 Due to the extended operational range of the remote control, it could be possible to unintentionally lock or unlock the vehicle by pressing the transmit button. If one of the transmit buttons is pressed, the battery check lamp lights up briefly – indicating that the batteries are in order. See page 291 for checking batteries. 5 P80.
Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 30 6 7 P80.30-2137-26 6 Infrared receiver in driver’s door handle P80.
Locking and unlocking with remote control If within 40 seconds of unlocking with the remote control, neither door nor trunk is opened, the electronic key is not inserted in the steering lock, or the central locking switch is not activated, the vehicle will automatically lock. Unlocking: Press transmit button Œ. All turn signal lamps blink once to indicate that the vehicle is unlocked. The remote control can be programmed for two kinds of unlocking modes (see below): Locking: Press transmit button ‹ once.
Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 32 Choosing global or selective mode on remote control Opening the trunk Press and hold transmit buttons ‹ and Œ simultaneously for five seconds to reprogram the remote control. Battery check lamp will blink two times indicating the completed mode change. The trunk lid will swing open automatically. You should always make sure there is sufficient clearance.
Opening and closing windows and sliding /pop-up roof from outside (summer opening/convenience feature) Ensure that all side windows and the sliding/pop-up roof are properly closed before leaving the vehicle. Aim transmitter eye of remote control at a door receiver. Warning! Summer opening: Never operate the windows or sliding/pop-up roof if there is the possibility of anyone being harmed by the opening or closing procedure. Continue to press transmit button Πafter unlocking the vehicle.
Instruments and controls Operation Driving Instrument cluster display Central locking system Practical hints Car care Technical data 34 Panic button Note: For operation in the USA only: This device complies with Part 15, Subpart C, Section 209 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and 1 (2) this device must accept any interference received, including interference that may cause undesired operation.
Doors 4 2 3 1 P72.10-2240-26 1 Opening – pull handle 5 Front door from inside: Pull handle to unlock. 2 Unlocking driver’s door 3 Locking driver’s door When you lock the driver’s door with the mechanical key, the door lock button should move down. 4 Individual door from inside: Push lock button down to lock. Each individual door must be locked with the respective door lock button – the driver’s door can only be locked when it is closed.
Instruments and controls Operation Driving Instrument cluster display Central locking system If the vehicle has previously been locked from the outside, opening a door from the inside will trigger the alarm. When opening a door while the central locking system is in the: • selective unlocking mode, only that individual door is unlocked. The remaining doors, the trunk and fuel filler flap remain locked. • global unlocking mode, all doors, the trunk and fuel filler flap are unlocked.
Central locking switch If the vehicle was previously locked with the central locking switch, while in the global remote control mode, the complete vehicle is unlocked when a front door is opened from the inside. Notes: If the vehicle was previously locked with the remote control, the doors and trunk cannot be unlocked with the central locking switch. The fuel filler flap cannot be locked or unlocked with the central locking switch.
Instruments and controls Operation Driving Instrument cluster display Central locking system Automatic central locking The central locking switch also operates the automatic central locking. With the automatic central locking system activated, the doors and trunk are locked at vehicle speeds of approximately 9 mph (15 km/ h) or more. The fuel filler flap remains unlocked. To activate: With electronic key in steering lock position 2 hold upper portion of switch (1) for a minimum of 5 seconds.
Trunk Important! When the trunk is separately locked, it remains locked when centrally unlocking the vehicle. Do not place mechanical key inside trunk, since trunk is locked again when the lid is closed if the vehicle has been previously centrally locked. To deny any unauthorized person access to the trunk, lock it separately with the mechanical key. Leave only the electronic main key less its mechanical key with the vehicle.
Instruments and controls Operation Driving Instrument cluster display Central locking system 0 Neutral position – push to open (arrow) 1 Unlocking 2 Separate locking of trunk – remove mechanical key in this position. Practical hints Car care Technical data 40 Lower trunk lid using handle (3) or recessed grip (4) and close it with grip molding (5). Please remember to keep your fingers out of the space between the lid and the vehicle.
Trunk lid release switch The trunk lid will swing open automatically. You should always make sure there is sufficient clearance. A minimum height clearance of 5.9 ft. (1.8 m) is required to open the trunk lid. To open the trunk, the vehicle must be at standstill. Pull up on switch until trunk lid is open. The indicator lamp in the switch remains on with trunk lid open. Notes: The trunk can also be opened by using the remote control. Press Š button.
Instruments and controls Operation Driving Instrument cluster display Central locking system Trunk lid emergency release Practical hints Car care Technical data 42 Note: The emergency release button (1) only unlocks and opens the trunk while the vehicle is standing. Important! The emergency trunk lid release button (1) does not open the trunk lid, if: • the vehicle battery is discharged or disconnected, • the trunk lid was previously locked separately with the mechanical key, see page 39.
Antitheft alarm system The antitheft alarm is automatically armed or disarmed with the remote control by locking or unlocking the vehicle. The antitheft alarm is armed within approximately 10 seconds after locking the vehicle. A blinking lamp (1) indicates that the alarm is armed.
Instruments and controls Operation Driving Instrument cluster display Antitheft alarm system The alarm will last approximately 3 minutes in form of flashing exterior lamps. At the same time an alarm will sound for 30 seconds. The alarm will stay on even if the activating element (a door, for example) is immediately closed. If the alarm stays on for more than 20 seconds, an emergency call is initiated automatically. See Tele Aid on page 178.
Tow-away alarm The alarm will last approximately 3 minutes in form of flashing exterior lamps. At the same time an alarm will sound for 30 seconds. The alarm will stay on even if the vehicle is immediately lowered. To cancel the alarm, insert the electronic key in the steering lock or press button Œ or ‹ on the electronic main key. If the alarm stays on for more than 20 seconds, an emergency call is initiated automatically. See Tele Aid on page 178.
Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 46 Power seats front Warning! Do not adjust the driver’s seat while driving. Adjusting the seat while driving could cause the driver to lose control of the vehicle. Never ride in a moving vehicle with the backrest reclined. Sitting in an excessively reclined position can be dangerous. You could slide under the seat belt in a collision.
allows you to reach the accelerator/brake pedal safely. The position should be as far rearward as possible, consistent with ability to properly operate controls. 5 3 Seat cushion tilt Press the switch in the direction of the arrow until your legs are lightly supported. 4 1 3 2 4 Backrest tilt Press the switch in the direction of the arrow until your arms are slightly angled when holding the steering wheel. 2 P54.
Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 48 Synchronizing Head Restraints Caution! If the power supply was interrupted (battery disconnected or empty), the head restraints are no longer adjusted automatically. Do not remove head restraints except when mounting seat covers. For removal refer to Front seat head restraints, see page 52. Whenever restraints have been removed be sure to reinstall them before driving.
Memory function Storing positions into memory Three sets of seat/head restraint/steering wheel and exterior rear view mirror positions may be programmed into memory. After the seat/head restraint /steering wheel and exterior rear view mirrors are positioned, push memory button (6), release, and within 3 seconds push position button “1”.
Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 50 Recalling positions from memory Important! To recall a seat/head restraint /steering wheel and exterior rear view mirror position, push and hold position button “1”, “2” or “3” until seat/ head restraint/ steering wheel and exterior rear view mirror movement has stopped.
Warning! According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. Infants and small children must ride in the back seats and be seated in an appropriate infant or child restraint system, which is properly secured with the vehicle’s seat belt, fully in accordance with the child seat manufacturer’s instructions.
Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 52 Front seat head restraints Installation: Push button (1) of the power adjustable head restraint up for approximately 5 seconds. 1 Insert the head restraint and push it down to the stop. Adjust head restraint to the desired position. For positioning of head restraints, see page 46 and 53. Warning! For your protection, drive only with properly positioned head restraints. P82.
Rear seat head restraints P91.16-2018-26 Folding head restraints backward (with engine running): Angle of head restraints: The head restraint angle can be adjusted manually. Press symbol-side of rocker switch to release the head restraints. The head restraints will then fold backward for increased visibility. Important! For safety reasons, always drive with the rear head restraints in the upright position when the rear seats are occupied. Keep area around head restraints clear of articles (e.g.
Instruments and controls Operation Instrument cluster display Driving Seats Practical hints Car care Technical data 54 Multicontour seat (optional) Some models may be equipped with multicontour seats. These seats have movable seat cushions, and inflatable air cushions built into the backrest to provide additional lumbar and side support.
Seat heater Notes: The seat heaters can be switched on with the electronic key in steering lock positions 1 or 2. When in operation, the seat heater consumes a large amount of electrical power. It is not advisable to use the seat heater longer than necessary. The seat heaters may automatically switch off if too many power consumers are switched on at the same time, or if the battery charge is low.
Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 56 Vehicles without seat ventilation Press switch to turn on seat heater: 1 Normal seat heating mode. One indicator lamp in the switch lights up. 1 2 2 Rapid seat heating mode. Both indicator lamps in the switch light up. After approximately 5 minutes in the rapid seat heating mode, the seat heater automatically switches to normal operation and only one indicator lamp will stay on.
Vehicles with seat ventilation Rapid heating mode: Press button (3) once. Both red indicator lamps above the button light up. The system switches over to normal heating mode automatically after approximately 5 minutes. Normal heating mode: Press button (3) twice. One red indicator lamp above the button lights up. The seat heater will be automatically switched off after approximately 30 minutes. Turning off the heater: Press the button (3) again. The indicator lamps go out. The seat heater is switched off.
Instruments and controls Operation Driving Instrument cluster display Seats Practical hints Car care Technical data 58 Seat ventilation Level 3 ventilation setting (maximum): Press button (1). Three blue indicator lamps beside the button light up. The level of ventilation is decreased one step approximately every 10 minutes. Level 2 ventilation setting (middle): Press button (1) again. Two blue indicator lamps beside the button light up.
Notes: When in operation, the seat ventilation consumes a large amount of electrical power. It is not advisable to use the seat ventilation longer than necessary. The seat ventilation may automatically switch off if too many power consumers are switched on at the same time or if the battery charge is low. When this occurs, one or more indicator lamps in the switch will blink. The seat ventilation will switch on again automatically as soon as sufficient voltage is available.
Instruments and controls Operation Driving Instrument cluster display Restraint systems Practical hints Car care Technical data 60 Seat belts and integrated restraint system Warning! Your vehicle is equipped with seat belts for all seats, emergency tensioning retractors for all outboard seat belts, dual front airbags, door mounted side impact airbags and head protective window curtain airbags. Their protective functions are designed to complement one another.
Warning! Warning! Never ride in a moving vehicle with the backrest reclined. Sitting in an excessively reclined position can be dangerous. You could slide under the seat belt in a collision. If you slide under it, the belt would apply force at the abdomen or neck. That could cause serious or even fatal injuries. The backrest and seat belt provide the best restraint when the wearer is in an upright position and the belt is properly positioned on the body.
Instruments and controls Operation Restraint systems Fastening of seat belts Driving Instrument cluster display Practical hints Car care Technical data 62 Push latch plate (1) into buckle (2) until it clicks. Do not twist the belt. A twisted seat belt may cause injury. To help avoid severe or fatal injuries, the lap belt should be positioned as low as possible on your hips and not across the abdomen. Warning! Always fasten your seat belt before driving off.
4 P91.40-2060-26 P91-10-2077-26 4 Button for belt outlet Tighten the lap portion to a snug fit by pulling shoulder portion up. Raising: Slide belt outlet upward. The shoulder portion of the seat belt must be pulled snug and checked for snugness immediately after engaging it. Lowering: Press button (4) and slide belt outlet downward. Adjust seat belt so that shoulder portion is located as close as possible to the middle of your shoulder (it should not touch the neck).
Instruments and controls Operation Driving Instrument cluster display Restraint systems Unfastening of seat belts Practical hints Car care Technical data 64 Warning! USE SEAT BELTS PROPERLY. • Seat belts can only work when used properly. Never wear seat belts in any other way than as described in this section, as that could result in serious injuries in case of an accident. Push the release button (3) in the belt buckle (2).
• Never wear belts over rigid or breakable objects in or on your clothing, such as eyeglasses, pens, keys etc., as these might cause injuries. • Each seat belt should never be used for more than one person at a time. Do not fasten a seat belt around a person and another person or other objects. • Position the lap belt as low as possible on your hips and not across the abdomen. If the belt is positioned across your abdomen, it could cause serious injuries in a crash. • Belts should not be worn twisted.
Instruments and controls Operation Driving Instrument cluster display Restraint systems Warning! USE CHILD RESTRAINTS PROPERLY. Children 12 years old and under must never ride in the front seat, except in a Mercedes-Benz authorized BabySmartTM compatible child seat, which operates with the BabySmartTM system installed in the vehicle to deactivate the passenger front airbag when it is properly installed. Otherwise they will be struck by the airbag when it inflates in a crash.
BabySmartTM airbag deactivation system The passenger front airbag will not deploy only if the 7 indicator lamp remains illuminated. Special BabySmartTM compatible child seats, designed for use with the Mercedes-Benz system and available at any authorized Mercedes-Benz Center are required for use with the BabySmartTM airbag deactivation system. Please be sure to check the indicator every time you use the special system child seat.
Instruments and controls Operation Driving Instrument cluster display Restraint systems Supplemental restraint system (SRS) Airbags are intended as a supplement to seat belts. Airbags alone cannot protect as well as airbags plus seat belts in impacts for which the airbags were designed to operate, and do not afford any protection whatsoever in crashes for which the airbags are not designed to deploy.
Emergency tensioning retractor (ETR) In cases of other frontal impacts, angled impacts, rollovers, certain side impacts, or other accidents without sufficient frontal or rear forces, the emergency tensioning retractors will not be activated. The driver and passengers will then be protected by the fastened seat belts and inertia reel in the usual manner. The seat belts for the front and outer rear seats are equipped with emergency tensioning retractors.
Instruments and controls Operation Driving Instrument cluster display Restraint systems Practical hints Car care Technical data 70 Airbags The most effective occupant restraint system yet developed for use in production vehicles is the seat belt. In some cases, however, the protective effect of a seat belt can be further enhanced by an airbag.
The following system components are monitored or undergo a selfcheck: crash-sensor(s), airbag ignition circuits, front seat belt buckles, emergency tensioning retractors, seat sensor. Warning! In the event a malfunction of the “SRS” is indicated as outlined above, the “SRS” may not be operational.
Instruments and controls Operation Driving Instrument cluster display Restraint systems Front airbags Practical hints Car care Technical data 72 Side impact airbags, window curtain airbags The driver and passenger front airbags are designed to activate only in certain frontal impacts exceeding a preset threshold. The front passenger airbag deploys only if the front passenger seat is occupied and the 7 indicator lamp on the center console is not illuminated.
Side impact airbags Important! The side impact airbags are designed to activate only in certain side impacts exceeding a preset threshold. Only the side impact airbags on the impacted side of the vehicle deploy. Airbags are designed to activate only in certain frontal (front airbags) impacts, or side (side impact and head protection window curtain airbags) impacts which exceed preset thresholds. The side impact airbag for the front passenger deploys only if the front passenger seat is occupied.
Instruments and controls Operation Driving Instrument cluster display Restraint systems Warning! Airbags are designed to reduce the potential of injury in certain frontal (front airbags) impacts, or side (side impact and head protection window curtain airbags) impacts which may cause significant injuries, however, no system available today can totally eliminate injuries and fatalities. The activation of the “SRS” temporarily releases a small amount of dust from the airbags.
• Sit properly belted in an upright position with your back against the backrest. • Occupants, especially children, should never lean their heads in the area of the door where the side airbag inflates. This could result in serious injuries or death should the airbag be triggered. Always sit upright, properly use the seatbelts and appropriate size infant or child restraint system • Adjust the driver’s seat as far as possible rearward, still permitting proper operation of vehicle controls.
Instruments and controls Operation Driving Instrument cluster display Restraint systems Warning! Accident research shows that the safest place for children in an automobile is in the rear seat. Should you choose to place a child 12 years old or under in the front passenger seat of your vehicle, you must properly use a BabySmartTM child restraint which will turn off the passenger side front airbag. BabySmartTM will not, however, turn off the vehicle’s side impact airbag.
• Airbags and “ETR’s” are designed to function on a one-time-only basis. An airbag or emergency tensioning retractor (ETR) that was activated must be replaced. • Improper work on the system, including incorrect installation and removal, can lead to possible injury through an unintended activation of the “SRS”. • No modifications of any kind may be made to any components or wiring of the “SRS”.
Instruments and controls Operation Driving Instrument cluster display Restraint systems Infant and child restraint systems We recommend all infants and children be properly restrained at all times while the vehicle is in motion. All lap-shoulder belts except the driver’s seat belt have special seat belt retractors for secure fastening of child restraints. To activate, pull shoulder belt out completely and let it retract.
Warning! Infants and small children should never share a seat belt with another occupant. During an accident, they could be crushed between the occupant and seat belt. Children 12 years old and under must never ride in the front seat, except in a Mercedes-Benz authorized BabySmartTM compatible child seat, which operates with the BabySmartTM system installed in the vehicle to deactivate the passenger front airbag when it is properly installed.
Instruments and controls Operation Driving Instrument cluster display Restraint systems Practical hints Car care Technical data 80 Installation of infant and child restraint systems 1 This vehicle is provided with tether anchorages for a top tether strap at each of the rear seating positions. Prior to installing a tether strap, remove cover (1) from anchorage ring (2) and store in a convenient place (e.g. glove box).
Steering wheel adjustment Note: The steering wheel position can be stored in memory together with the seat/head restraint /exterior rear view mirror positions, see page 49. Warning! Do not adjust the steering wheel while driving. Adjusting the steering wheel while driving could cause the driver to lose control of the vehicle. P46.
Instruments and controls Operation Driving Instrument cluster display Rear view mirrors Practical hints Car care Technical data 82 Rear view mirrors Note: Inside rear view mirror The automatic antiglare function does not react, if incoming light is not aimed directly at sensors in the mirror. Manually adjust the mirror. Use your inside mirror to determine the size and distance of objects seen in the passenger-side convex mirror.
Exterior rear view mirrors Turn electronic key in steering lock to position 1 or 2. First select the mirror to be adjusted – press button: % Left mirror & Right mirror To adjust, toggle the switch forward, backward or to either side. With the electronic key in steering lock position 2, the driver’s side mirror reflection brightness responds to changes in light sensitivity.
Instruments and controls Operation Driving Instrument cluster display Rear view mirrors Practical hints Car care Technical data 84 Note: Important! The exterior mirrors have electrically heated glass. The heater switches on automatically, depending on outside temperature. Electrolyte drops coming into contact with the vehicle paint finish can only be completely removed while in their liquid state, by applying plenty of water.
Parking position One passenger-side mirror position can be stored in memory. To do so: The passenger-side exterior mirror can be adjusted and programmed to assist the driver during parking maneuvers (e.g. to observe the curb or other objects close to the vehicle). 1. Turn electronic key to steering lock position 2. The vehicle must be stationary.
Instruments and controls Operation Instrument cluster Instrument cluster Driving Instrument cluster display Practical hints 86 Car care Technical data Index
1 Push buttons for intensity of instrument lamps, see page 89 8 Speedometer 9 Trip odometer, see page 91 and 96 2 Push button for resetting trip odometer, see page 91, or to acknowledge a malfunction warning message, see page 108 10 Main odometer, see page 96 11 Multifunction indicator, see page 92, or FSS indicator, see page 114, or engine oil level indicator, see page 117 3 Coolant temperature gauge, see page 90 4 Fuel gauge with reserve and fuel cap placement warning lamp, see page 236 12 Right turn
Instruments and controls Operation Driving Instrument cluster display Instrument cluster Practical hints Technical data 88 Indicator lamps in the instrument cluster High beam CHECK ENGINE ABS malfunction, see page 237 ABS BRAKE Car care Brake fluid low (except Canada). Parking brake engaged, see page 202 Brake fluid low (Canada only). Parking brake engaged, see page 202 BAS malfunction, see page 237 ESP malfunction, see page 237 SRS Engine malfunction indicator lamp.
Activating instrument cluster display Instrument cluster illumination The instrument cluster is activated by: • Opening the door. • Pressing button J, V or W on the instrument cluster. • Turning the electronic key in steering lock to position 1 or 2. • Switching on the exterior lamps. P54.30-2767-26 Activating the instrument cluster. Press V or W button to vary intensity of instrument lamps.
Instruments and controls Operation Driving Instrument cluster display Instrument cluster Practical hints Car care Technical data 90 Coolant temperature gauge (3) Outside temperature indicator (5) During severe operating conditions and stop-and-go city traffic, the coolant temperature may rise close to the red marking. The temperature sensor is located in the front bumper area. Due to its location, the sensor can be affected by road or engine heat during idling or slow driving.
Trip odometer (9) Tachometer (13) To reset to “0” miles/km: The red marking on tachometer denotes excessive engine speed. Activate the instrument cluster if it is not already activated, see page 89. Avoid this engine speed, as it may result in serious engine damage that is not covered by the Mercedes-Benz Limited Warranty. Press button è or ÿ on the multifunction steering wheel repeatedly until the trip odometer appears if it is not displayed, see page 96.
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Multifunction steering wheel, multifunction display Practical hints 92 Car care Technical data Index
Press the è or ÿ button repeatedly until the required system is displayed. Depending on your vehicle’s equipment, you may use the buttons on the multifunction steering wheel to call up, control and set the following systems in the multifunction display: Pressing the è button advances the display to the next system. Pressing the ÿ button returns the display to the previous system.
Instruments and controls Operation Instrument cluster display Driving Multifunction steering wheel, multifunction display Practical hints Car care Technical data 94 Turn the electronic key in steering look to position 1 or 2.
Press the è or ÿ button repeatedly until the required system is displayed. Note: The displays in the multifunction display can be set to German, English, French, Italian or Spanish language. See the “TEXT” individual setting on page 110 for instructions on changing the language setting. Pressing the è button advances the display to the next system. Pressing the ÿ button returns the display to the previous system.
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Trip and main odometer, vehicle speed, FSS and engine oil level display Practical hints Car care Technical data 96 1 Trip odometer and main odometer See page 91 for instructions on resetting the trip odometer.
Audio systems 1 Audio system is switched off. Radio 2 The radio is switch on. 3 Wave band setting and memory location number, where appropriate. 4 Station frequency. 5 This only appears when “MEMORY” rather than “FREQUENCY” has been selected in the Individual settings. See page 110. The radio must be switched on. Press the è or ÿ button repeatedly until display (2) appears. Press button j or k repeatedly until the required station or frequency is displayed.
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display CD player (optional) Practical hints Car care Technical data 98 1 Audio system is switched off. 2 The CD player is switched on. 3 The number of the CD currently playing is displayed if you are using a CD changer. 4 Track number. The radio must be switched on. The CD player must be switched on. Press the è or ÿ button repeatedly until display (2) appears.
Cassette player 1 Audio system is switched off. 2 The cassette player is switched on. 3 Side being played. The radio must be switched on. The cassette player must be switched on. Press the è or ÿ button repeatedly until display (2) appears. Pressing the j button fast forwards on to the next track. Pressing the k button rewinds the cassette to the beginning of the current track. Pressing the è or ÿ button displays the next or previous system.
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Practical hints Car care Technical data 100 Telephone 1 The telephone is switched off. Telephone book 2 The vehicle is currently outside the transmitter or receiver range. 3 The telephone is ready for use. 4 Name selected from the telephone book. 5 Number for the name selected. Dialing commences. 6 Dialing is completed. The name is displayed.
Press the í button when the name you require appears in the display (4). The telephone number (5) is dialed. The telephone must be switched on. Press the è or ÿ button repeatedly until display (3) appears. Refer to the separate telephone instruction manual. The name will be displayed when dialing is completed. Display (6) remains for the duration of the call. Pressing j or k “browses” alphabetically forwards or backwards through the telephone book, providing it was previously downloaded.
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Redialing Practical hints Car care Technical data 102 1 The telephone is ready for use. 2 Number or name stored in the redial memory. 3 Number in the redial memory — redialing has commenced. 4 Dialing is completed and the name stored in the telephone book is displayed or the number dialed will remain displayed if no name has been stored.
Press the í button when the required number or name appears in the display (2). The telephone number (3) is dialed. The telephone is switched on. Press the è or ÿ button repeatedly until the display (1) appears. Once dialing is completed the name (4) is displayed if the name is stored in the telephone book; failing that the number dialed will remain displayed. The display remains for the duration of the call.
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Incoming call Practical hints Car care Technical data 104 1 “CALL” — you are being called Press the í button to answer the call. Press the ì button to hang up or if you do not wish to answer the incoming call. The telephone must be switched on.
Navigation system (optional) 1 The navigation system is switched off. 2 The navigation system is switched on but no destination has been specified. 3 The navigation system is switched on and destination guidance is active. Press the è or ÿ button repeatedly until the required system is displayed. See the separate COMAND (Cockpit Management and Data System) operator’s manual for notes on the navigation system. Pressing the è or ÿ button displays the next or previous system. P54.
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Trip computer Practical hints Car care Technical data 106 1 “AFTER START” — trip odometer records distance from first engine start after more than five hours of electronic key not being in steering lock position 2 2 “AFTER RESET” — trip odometer records distance from first engine start until it is reset 3 Estimated driving range remaining and fuel tank contents 4 Distance covered
Press the button è or ÿ repeatedly until the display (1) appears. To reset the “AFTER START” (1) or “AFTER RESET” (2) odometer memory at any time: Press the j or k button until the display for trip odometer memory “AFTER START” (1) and “AFTER RESET” (2), or the display (3) for estimated driving range remaining and fuel tank contents appears. Call up the relevant display (1 or 2) using the j or k button and press the J button in the instrument cluster until the values are reset.
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Malfunction message memory Practical hints Car care Technical data 108 1 There are no messages stored in the system 2 Number of messages stored in the system Press the è or ÿ button repeatedly until the malfunction message memory (1 or 2) is displayed. Press the j or k button if display (2) appears. The stored malfunction messages will now be displayed in order.
Important! Should any malfunctions be stored while driving, they will reappear in the display (2) when the electronic key is in steering lock position 0 or removed from the steering lock. Malfunctions and warning messages are only indicated for certain systems and displayed to a low level of detail.
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Individual settings R 8 Practical hints 110 Car care Technical data Index
1 Preliminary display of the individual settings 8 “STATION SEARCH USING” — radio adjustment 2 “SET TIME – HOURS” (Only vehicles without COMAND) “FREQUENCY” – use the j or k button to select a frequency 3 “SET TIME – MINUTES” (Only vehicles without COMAND) “MEMORY” – use the j or k button to select a stored station (preset memory) 9 See page 113 for instructions on returning the setting menus to the factory settings 4 “12/24 O’CLOCK”, the unit set is displayed in the instrument cluster (Only vehicles
Instruments and controls Operation Driving Instrument cluster display Multifunction steering wheel, multifunction display Press the è or ÿ button repeatedly until the individual setting preliminary display (1) appear. Press the j or k button until the required setting menu (2 to 8) is displayed. Pressing the æ or ç button sets the time in setting menus (2, 3) and controls the selection marker in setting menus (4 to 8). The settings made are stored and applied immediately.
Setting the audio volume To return setting menus (4 to 8) to their factory settings: You can only adjust the volume of the system currently in use. The volume setting for each system (audio, telephone, navigation and voice recognition system) is stored separately. • Call up the individual setting preliminary display (1). • Press the J button in the instrument cluster for approximately 3 seconds. Display (9) will appear.
Instruments and controls Operation Instrument cluster display Driving Flexible service system Practical hints Car care Technical data 114 Flexible service system (FSS) (service indicator) 60 100 80 40 60 20 80 120 140 The message is displayed for approximately 10 seconds when turning the electronic key in steering lock to position 2, or while driving when reaching the service warning threshold.
The service indicator disappears automatically after 30 seconds or if button J on the instrument cluster is pressed. Note: When disconnecting vehicle battery for one or more days at a time, such days will not be counted. Any such days not counted by the FSS can be added by your Mercedes-Benz Center. Calling up service indicator manually: Turn the electronic key in steering lock to position 1. The interval between services is determined by the type of driving for which the vehicle is used.
Instruments and controls Operation Driving Instrument cluster display Flexible service system Practical hints Car care Technical data 116 Following a completed A or B service the Mercedes-Benz Center sets the counter mileage to 10 000 miles (Canada: 15 000 km) and 365 days. The multifunction display will show the question: “DO YOU WANT TO RESET SERVICE INTERVAL? CONFIRM BY PRESSING R” The counter can also be set by any individual.
Engine oil level indicator Turn the electronic key in steering lock to position 2. To call up the trip odometer and main odometer, press button è or ÿ on the multifunction steering wheel until the display appears. See page 96. Press button j or k on the multifunction steering wheel repeatedly until the “MEASUREMENT CORRECT – ONLY IF VEH. LEVEL” engine oil level indicator appears. This indicator is only a reminder.
Instruments and controls Operation Driving Instrument cluster display Engine oil level indicator One of the following messages will subsequently appear on the indicator: “ENGINE OIL LEVEL – O.K.” No oil needs to be added. “ENGINE OIL LEVEL – ADD 1.0 QUART” (Canada: 1.0 L) “ENGINE OIL LEVEL – ADD 1.5 QUART” (Canada: 1.5 L) “ENGINE OIL LEVEL – ADD 2.0 QUART” (Canada: 2.0 L) See page 260 for instructions on adding engine oil. “ENGINE OIL LEVEL – REDUCE OIL LEVEL” Do not overfill the engine.
B Parking lamps plus low beam or high beam headlamps (combination switch pushed forward). Exterior lamp switch ˆ Standing lamps, right (turn left one stop) ‚ Standing lamps, left (turn left two stops) ‡ Front fog lamps (pull out one stop) with parking lamps and/ or low beam headlamps on. Green indicator in lamp switch comes on. † Rear fog lamp (pull out to second detent) in addition to the front fog lamps. Yellow indicator in lamp switch comes on.
Instruments and controls Operation Driving Instrument cluster display Exterior lamp switch Note: With the electronic key removed and the driver’s door open, a warning sounds and the message “SWITCH OFF LIGHTS!” in the multifunction indicator appears if the vehicle’s exterior lamps (except standing lamps) are not switched off. Fog lamps will operate with the parking lamps and/or the low beam headlamps on. Fog lamps should only be used in conjunction with low beam headlamps.
Headlamp cleaning system (optional) The switch is located in the center console. The headlamp washer can be activated with the electronic key in steering lock position 2. Briefly press symbol side of switch. P82.
Instruments and controls Operation Driving Instrument cluster display Combination switch Practical hints Car care Technical data 122 Combination switch 4 Turn signals, right 5 Turn signals, left To signal minor directional changes, such as changing lanes on a highway, move combination switch to the point of resistance only and hold it there. 4 4 3 1 2 To operate the turn signals continuously, move the combination switch past the point of resistance (up or down).
7 Windshield wiper 0 Wiper off I Intermittent wiping Vehicles with optional rain sensor: One initial wipe, pauses between wipes are automatically controlled by a rain sensor monitoring the wetness of the windshield. Notes: With switch in this position, one wipe occurs when turning the electronic key in steering lock from position 0. P54.
Instruments and controls Operation Driving Instrument cluster display Combination switch Practical hints Car care Technical data 124 Note: Blocked windshield wiper The windshield washer reservoir, hoses and nozzles are automatically heated. If the windshield wiper becomes blocked (for example, due to snow), switch off the wiper. For windshield and headlamp washer fluid mixing ratio see page 263.
Hazard warning flasher switch The hazard warning flasher can be activated with the switch located in the dashboard. To activate hazard warning flasher, press switch once. To deactivate, press switch again. Note: With the hazard warning flasher activated, the combination switch in position for either left or right turn, and the electronic main key in steering lock position 2, only the respective left or right side turn signals will operate.
Instruments and controls Operation Driving Automatic climate control Instrument cluster display Practical hints Car care 126 Automatic climate control 5 4 3 3 1 6 2 Technical data Index
1 Air volume control for center air outlets, turn wheel up to open. The system is always at operational readiness, except when manually switched off. 2 Air volume control for side air outlet and side window defroster outlet. The automatic climate control only operates with the engine running. The temperature selector should be left at the desired temperature setting. The temperature selected is reached as quickly as possible. To open side air outlets: Turn wheel to position i.
Instruments and controls Operation Driving Instrument cluster display Automatic climate control Practical hints Car care Technical data 128 Display and controls Press the desired button to activate, indicator lamp is on while activated. U Automatic mode f Raise temperature g Lower temperature P Defrost O Air recirculation e Activated charcoal filter 0 F Rear window defroster MAX b Air distribution, manual P83.
Basic setting - automatic mode Special settings (use only for short duration) Press left and right U button for automatic mode. Simultaneously press both f and g buttons for temperature setting of 72°F. Defogging windows Q Press left and right U buttons. Switch off O button. Press b button repeatedly until air is directed upward. Air volume and distribution are controlled automatically. S This setting can be used all year around.
Instruments and controls Operation Driving Instrument cluster display Automatic climate control Practical hints Car care 130 Rear window defroster Air distribution Turn electronic key in steering lock to position 2. U To select, press F button. To cancel, press F button again. Notes: Heavy accumulation of snow and ice should be removed before activating the defroster. The rear window defroster uses a large amount of power.
Air recirculation Dust filter This mode can be selected to temporarily reduce the entry of annoying odors or dust into the vehicle’s interior. Nearly all dust particles and pollen are filtered out before outside air enters the passenger compartment through the air distribution system. Outside air is not supplied to the car’s interior. Notes: To select, press O button. To cancel, press O button again.
Instruments and controls Operation Driving Instrument cluster display Automatic climate control Practical hints Car care Technical data 132 Activated charcoal filter Residual engine heat utilization An activated charcoal filter markedly reduces bad odors and removes pollutants from the air entering the passenger compartment. With the engine switched off, it is possible to continue heating the interior for a short while. To select, press e button. To cancel, press e button again.
Front center console compartment ventilation Note: The compartment can get very warm due to its confined space. When storing heat sensitive objects in the compartment, close the air outlet while heating the passenger compartment. The front center console compartment has its own air outlet. To open: Push lever down. Also, do not obstruct the air outlet. To close: Push lever up.
Instruments and controls Operation Driving Instrument cluster display Automatic climate control Practical hints Car care Technical data 134 Rear passenger compartment adjustable air outlet Important This vehicle is equipped with an air conditioner system that uses R-134a (HFC: hydrofluorocarbon) as a refrigerant. Repairs should always be performed by a qualified technician, and refrigerant should be collected in a recovery system for recycling. 1 P68.
Operating safety Operation – audio and telephone These instructions are intended to help you become acquainted with your Mercedes- Benz car radio. They contain useful tips and a detailed description of the user functions. Warning! Any alternations made to electronic components can cause malfunctions The radio, cassette deck, CD changer1 and telephone1 are interconnected.
Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 136 Operating and display elements 1 On/off, volume, see page 139 6 CD mode selector, see page 148 2 Telephone mode selector, see page 151 7 Display panel, see page 143 3 Seek, see page 141, 145 and 149 8 Alpha-numeric keypad for station storage and frequency entry, see page 142 CD/ Track access, see page 145 and 150 optional telephone, see page 151 4 Radio mode selector
10 Soft keys for radio band selection, see page 141 tone controls, see page 139 scan, see page 142 Tape eject, see page 144 Tape track select, see page 144 Dolby, see page 146 CD random /repeat, see page 150 11 Tape mode selector, see page 143 Anti-theft system If the power supply to the radio has been interrupted,“CODE” will appear on the display when it is next switched on. The radio will only work after the five-digit code has been entered using the buttons on the right-hand control panel.
Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 138 Entering the code number Button and soft key operation Switch on the radio.“CODE” will appear on the display. Using the buttons on the alpha-numeric keypad, enter the five digit code. Confirm by pressing the “OK” key.
Operation Audio functions The AUD key is used to select the BASS, TREBLE, FADER and BALANCE functions. Settings for bass and treble are stored separately for the cassette and CD modes. Tone level settings are identified by the vertical bars. The center (flat) setting is shown by one longer bar in the center of the display. Switching on and off Press the control knob . The radio is switched off when the ignition key is turned to position 0 or removed from the ignition.
Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 140 Fader 1 Centering all audio functions Press the AUD key repeatedly until “FADER” appears on the display. Press the “R” key to move the sound to the rear speakers or the “F” key to move the sound to the front speakers. Push and hold down the “AUD” key.
Radio mode Manual tuning Press either the or button. Step-by-step tuning in ascending or descending order of frequency will take place. Selecting radio mode Press button. Selecting the band The first three tuning steps will take place without muting. The radio will then be muted and high-speed tuning will take place until the button is released. The following tuning intervals will be shown on the display: Press the key located below the desired band.
Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 142 Scan tuning Storing stations Press the SC key. Each strong receivable station on the band selected will be tuned in for 8 seconds. The first scan will tune only the stations with a high signal strength. The second scan will tune every receivable station. By pressing either the , , or buttons, or the “SC” key the scan mode can be cancelled.
Cassette mode Playing cassettes Press the “TAPE” button. When the eject (EJ) key is pressed, the display folds down and the cassette slot becomes visible. Push the cassette into the slot until it engages. The cassette will be pulled in automatically. Note: Vehicles equipped with the COMAND system do not come with a factory installed cassette mechanism.
Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 144 Important! Cassette eject If the display is in the down position for more than 20 seconds, 2 successive beeps will be heard. This will continue at 5 second intervals until the display is returned to its normal position. Press the eject (EJ) key. The display will fold down and the cassette will be ejected. Remove the cassette, then fold the display back up manually.
Track search forwards /backwards Fast forward /reverse Press the button. “SEEK FWD” will be shown on the display and the track search will run the tape forwards to the start of the next track. Press the button. “FORWARD” will appear on the display and fast forward will start. Press the button. “REWIND” will appear on the display and fast reverse will start. Press the button.
Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 146 Dolby NR 1 (noise reduction system) Scanning Press the “SC” key. Each track on the cassette will be played for 8 seconds in ascending order. Note: The beginning of a track can only be located if there is a break of at least 4 seconds between tracks. Scan will be interrupted if the , buttons or the “SC” key is pressed.
CD mode Replace the CD in its container after use. Protect CDs from heat and direct sunlight. General notes on CD mode Warning! Should excessive temperatures occur while in CD mode, “TEMP HIGH” will appear in the display and muting will take place. The unit will then switch back to radio mode until the temperature has decreased to a safe operating level. The CD changer 1 is a Class 1 laser product. There is a danger of invisible laser radiation if the cover is opened or damaged.
Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 148 Loading /emptying the CD magazine CD changer installed Slide the changer door to the right and press the eject button . The magazine will be ejected. Remove the magazine. Pull out the CD tray until its stop is reached and place the CDs in the recess of the tray, label side up. Push the tray into the magazine in the direction shown by the arrow.
Fast forward /reverse If there is no CD in the selected magazine slot, “NO CD” and the corresponding slot number will be displayed (e.g.“NO CD3”). After the last track on a CD has been played, the next CD will automatically be selected and played. button. The next track on the CD will be Press the button. If the track has been playing for more than 10 seconds, it will revert to the start of that track. If it has been playing for less than ten seconds it will revert to the preceding track.
Instruments and controls Operation Driving Instrument cluster display Audio system Practical hints Car care Technical data 150 Random play/repeat function Direct track selection The tracks of the current CD are played in random order when the random feature (RDM) is selected. Press the RDM key to switch on, and press RDM again to switch off. Tracks can be selected directly using the buttons on the alpha-numeric keypad. Press the “ function button, followed by the track number.
Entering telephone number and starting dialing process Telephone operation Various functions of the Mercedes-Benz integrated cellular telephone 1 can be performed and displayed via the car radio. Further instructions for operating the car telephone can be found in the operation guide for the cellular telephone 1. Enter the desired telephone number using the alphanumeric keypad. The number can have up to 32 digits, but only 13 of these can be displayed.
Instruments and controls Operation Driving Instrument cluster display Audio system Switching between name search and number search Press ABC key - Name search Press NUM key - Number search Practical hints Car care Technical data 152 Placing a call When a number or a name has been selected using the method described above, press the SND key. Searching and selecting phone book entries by name Press the ABC key. The current name is shown on the display.
Accepting incoming call in telephone mode Component malfunctions With an incoming call, the ringing tone will be heard and the message “CALL” appears in the display. Press the SND key to answer the call. The radio, CD changer 1, and Mercedes-Benz integrated cellular telephone 1 are part of a fiberoptic networked system. Failure of one of the components can lead to malfunctions of the other components.
Instruments and controls Operation Instrument cluster display Driving Interior equipment Practical hints Car care Technical data 154 Power windows 1 3 5 2 4 P54.25-2119-26 Power window switches located on center console Switches for: 1 left, front 2 left, rear Power window switches located in rear doors 6 Individual switches (rear doors) Turn electronic key in steering lock to position 1 or 2.
Express opening and closing Blocking of rear door window operation Press switch k or j past resistance point and release — window opens or closes completely. If no operation of the rear windows by switch (6) (for instance by children) is desired, slide override switch (5) to right, symbol N becomes visible. To interrupt procedure, briefly press k or j.
Instruments and controls Operation Driving Instrument cluster display Interior equipment Synchronizing power windows Practical hints Technical data Car care 156 Sliding/pop-up roof (optional) If the power supply was interrupted (battery disconnected or low), the windows cannot be opened or closed by the Express feature. To resynchronize the express feature, press j side of power window switch until the window is completely closed and hold for additional 2 seconds. Repeat procedure for each window.
Release the switch when the roof has reached the required position. The switch is illuminated when the exterior lamps are switched on (except standing lamps). Warning! When closing the sliding/pop-up roof, be sure that there is no danger of anyone being harmed by the closing procedure. The closing procedure can be immediately reversed by either moving the switch in direction (1) or (3), or pressing button Πon the remote control, and holding it.
Instruments and controls Operation Driving Instrument cluster display Interior equipment Practical hints Car care Technical data 158 Express opening of sliding /pop-up roof Synchronizing sliding/pop-up roof Move switch past resistance point and release — the sliding/pop-up roof slides open automatically. If the power supply was interrupted (battery disconnected or low), or if the sliding/pop-up roof is blocked during closing/opening procedure, the system has to be synchronized.
Interior lighting 2 Press to switch interior and reading lamps on or off. 3 Press to switch rear passenger compartment lamp (including reading lamps) on or off. 4 Press to switch reading lamp on or off. Notes: To prevent the vehicle battery from being discharged, with reading lamps switched on manually and electronic key in steering lock position 0 or removed, the reading lamps go out after approximately 30 minutes.
Instruments and controls Operation Driving Interior equipment Rear window sunshade (optional) Instrument cluster display Practical hints Car care Technical data 160 1 Hold to raise 2 Hold to lower The switch is located on center console. Turn electronic key in steering lock to position 1 or 2. The sunshade should always be either fully raised or fully lowered.
Sun visors Illuminated vanity mirrors P68.60-2026-26 P68.00-2430-26 Swing sun visors down to protect against sun glare. With the visor engaged in its inner mounting, the lamp is switched on by opening the cover. If sunlight enters through a side window, disengage visor from inner mounting, pivot to the side and slide it to the desired position. Warning! Do not use the vanity mirror while driving. The lamp goes out automatically after approximately 5 minutes.
Instruments and controls Operation Driving Instrument cluster display Interior equipment Interior Practical hints Car care Technical data 162 Cup holder in rear bench armrest Warning To help avoid personal injury during a collision or sudden maneuver, exercise care when stowing things. Put luggage or cargo in the trunk if possible. Do not pile luggage or cargo higher than the seat backs. Do not place anything on the shelf below the rear window. 1 Luggage nets cannot secure hard or heavy objects.
Glove box Cup holder and coin holder in glove box lid P68.10-2383-26 1 Unlocking: Turn mechanical key to vertical position and remove. Caution! Keep glove box lid closed while traveling. Place only containers that fit into the cup holder to prevent spills. 2 Locking: Turn mechanical key to the right and remove. 3 Opening: Pull on handle. The glove box can be locked and unlocked with the mechanical key. See page 25 for instructions on how to remove the mechanical key from the electronic main key (e.g.
Instruments and controls Operation Driving Instrument cluster display Interior equipment Practical hints Car care Technical data 164 Storage compartment above ashtray in center console Storage compartments in center console P68.20-2259-26 To open: Touch bottom of cover slightly. The cover opens automatically. To open compartment in armrest: Lift lid with handle (4). To open compartment under armrest: Lift lid with handle (5). To close: Lower lid until it engages in lock.
Cup holder in center console Note: The right claw is adjustable to accommodate most container sizes. An additional second (smaller size) container can be placed in the cup holder. Spilling liquids (e.g. soda or coffee) could restrict the movement of the claw. Refer to page 304 for cleaning the cup holder. Caution! Keep cup holder closed while traveling. Place only containers that fit into the cup holder to prevent spills.
Instruments and controls Operation Driving Instrument cluster display Interior equipment Ashtrays Practical hints Car care Technical data 166 Warning! Remove front ashtray only with vehicle standing still. With the gear selector lever in position “N”, turn off the engine and set the parking brake. Otherwise the vehicle might move as a result of unintended contact with the gear selector lever. To remove ashtray: Push sliding knob (1) toward the right to eject the insert.
Rear doors To remove ashtray: Push left and right sides down and pull out the ashtray. To install ashtray: Install top of ashtray, push bottom part in to engage.
Instruments and controls Operation Driving Instrument cluster display Interior equipment Lighter Practical hints Car care Technical data 168 Warning! Never touch the heating element or sides of the lighter, they are extremely hot, hold at knob only. When leaving the vehicle always remove the electronic key from the steering lock. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause serious personal injury.
Cargo tie-down hooks Parcel net in front passenger footwell A small convenience parcel net is located in the front passenger footwell. It is for small and light items, such as road maps, mail, etc.. Warning! Do not place heavy or fragile objects, or objects having sharp edges, in the parcel net. In an accident, during hard braking or sudden maneuvers, they could be thrown around inside the vehicle, and cause injury to vehicle occupants. Inside the trunk are six cargo tie-down hooks.
Instruments and controls Operation Driving Instrument cluster display Interior equipment Practical hints Car care 170 Cellular telephone Shelf below rear window The vehicle is prepared for the installation of a cellular telephone. For further information and installation contact your authorized Mercedes-Benz Center. Warning! Warning! Some jurisdictions prohibit the driver from using a cellular telephone while driving a vehicle.
Garage door opener The built-in remote control is capable of operating up to three separately controlled objects. Note: Certain types of garage door openers are incompatible with the integrated opener. If you should experience difficulties with programming the transmitter, contact your authorized Mercedes-Benz Center, or call Mercedes-Benz Client Assistance Center (in the USA only) at 1-800-FOR-MERCedes, or Customer Service (in Canada) at 1-800-387-0100.
Instruments and controls Operation Driving Instrument cluster display Garage door opener Programming or reprogramming the integrated remote control: 1. Turn electronic key in steering lock to position 1 or 2. 2. Hold the end of the hand-held transmitter of the device you wish to train approximately 2 to 5 inches (5 cm to 12 cm) away from the surface of the integrated remote control located on the inside rear view mirror, keeping the indicator lamp in view. 3.
Operation of remote control: Note: Following step 2, there are 30 seconds to initiate step 3. 1. Turn electronic key in steering lock to position 1 or 2. 3. Firmly press and release the programmed integrated remote control transmit button. Press and release same button a second time to complete the training process. (Some garage door openers may require you to do this procedure a third time to complete the training.) 2. Select and press the appropriate button to activate the remote controlled device.
Driving Control and operation of radio transmitters ................ 176 The first 1 000 miles (1 500 km) ................................. 177 Maintenance ................................... 177 Tele Aid ........................................... 178 Catalytic converter ........................ 188 Emission control ............................ 189 Steering lock ................................... 190 Starting and turning off the engine .................................. 192 Automatic transmission ........
Instruments and controls Operation Driving Instrument cluster display Control and operation of radio transmitters Practical hints Car care Technical data 176 Control and operation of radio transmitters COMAND, radio and telephone Telephones and two-way radio Warning! Warning! Please do not forget that your primary responsibility is to drive the vehicle. Only operate the COMAND (Cockpit Management and Data System), radio or telephone 1 if road and traffic conditions permit.
The first 1 000 miles (1 500 km) Maintenance The more cautiously you treat your vehicle during the break-in period, the more satisfied you will be with its performance later on. Therefore, drive your vehicle during the first 1 000 miles (1 500 km) at moderate vehicle and engine speeds. Approximately 30 days or 2000 miles (2000 km) prior to the next recommended service, the remaining distance or days are displayed in the multifunction indicator. See Flexible service system (FSS) on page 114.
Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 178 Tele Aid Important! The initial activation of the Tele Aid system may only be performed by completing the subscriber agreement and placing an acquaintance call using the “SOS” button. Failure to complete either of these steps will result in a system that is not activated.
Important! Once the emergency call is in progress, the indicator lamp in the “SOS” button will begin to flash. The message “EMERGENCY CALL – CONNECTING CALL” appears in the multifunction display. When the connection is established, the message “EMERGENCY CALL – CALL CONNECTED” appears in the multifunction display. All information relevant to the emergency, such as the location of the vehicle (determined by the GPS satellite location system), vehicle model, identification number and color are generated.
Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 180 The Tele Aid system is available if: • it has been activated and is operational. Activation requires a subscription for monitoring services and cellular air time • the relevant cellular phone network and GPS signals are available and pass the information on to the response center.
Initiating an emergency call manually Briefly press on cover (1) – the cover will open. Press the SOS button (2) briefly (for longer than 2 seconds). The indicator lamp in the SOS button (2) will flash until the emergency call is concluded. Wait for a voice connection to the Response Center. Close the cover (1) after the emergency call is concluded. Warning! If you feel at any way in jeopardy when in the vehicle (e.g.
Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 182 Roadside Assistance button • Located below the center armrest cover is the Roadside Assistance button •. Pressing and holding the button (for longer than 2 seconds) will initiate a call to a Mercedes-Benz Roadside Assistance dispatcher. The button will flash while the call is in progress.
If the indicator lamp in the Roadside Assistance button • is illuminated continuously and there was no voice connection to the Response Center established, then the Tele Aid system could not initiate an Roadside Assistance call (e.g. the relevant cellular phone network is not available). The message “ROADSIDE ASSISTANCE – CALL FAILED” appears in the multifunction display. A voice connection between the Client Assistance Center representative and the occupants of the vehicle will be established.
Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 184 If the indicator lamp in the Information button ¡ is illuminated continuously and there was no voice connection to the Response Center established, then the Tele Aid system could not initiate an Information call (e.g. the relevant cellular phone network is not available). The message “INFO – CALL FAILED” appears in the multifunction display.
Important! When a Tele Aid call has been initiated, the audio system or the COMAND system audio (only vehicles with COMAND) is muted and the selected mode (radio, tape or CD) pauses. The optional cellular phone (if installed) switches off. If you must use this phone, the vehicle must be parked. Disconnect the coiled cord and place the call. The navigation system (if engaged) will continue to run.
Instruments and controls Operation Driving Instrument cluster display Tele Aid Practical hints Car care Technical data 186 Remote door unlock Notes: In the case you have your vehicle locked unintentionally (e.g. key inside vehicle), and the reserve key is not handy, contact the Mercedes-Benz Response Center at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in Canada). You will be asked to provide your password which you provided when you completed the subscriber agreement.
Stolen vehicle tracking services Once information is available, the message “NEW INFO RECEIVED - READ LATER WHEN STOPPED?” will appear. Select “Yes”. With the vehicle stopped in a safe location press SVC, then select “View Info Service of mm.dd.yyyy hh.mm”. Messages will be retained for 30 minutes once the ignition is switched off. In the event your vehicle was stolen, report the incident to the police who will issue a numbered incident report. Pass this number on to the Mercedes-Benz Response Center.
Instruments and controls Operation Driving Instrument cluster display Catalytic converter Practical hints Car care Technical data 188 Catalytic converter Warning! Your Mercedes-Benz is equipped with monolithic type catalytic converters, an important element in conjunction with the oxygen sensors to achieve substantial control of the pollutants in the exhaust emissions.
Emission control Warning! Certain systems of the engine serve to keep the toxic components of the exhaust gases within permissible limits required by law. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide, and inhaling it can cause unconsciousness and lead to death. These systems, of course, will function properly only when maintained strictly according to factory specifications.
Instruments and controls Operation Driving Instrument cluster display Steering lock Practical hints Car care Technical data 190 Steering lock 1 Steering is unlocked. (If necessary, move steering wheel slightly to allow the electronic key to be turned clockwise to position 1.) Most electrical consumers can be operated. For detailed information see respective subjects. 2 Driving position. 3 Starting position. See page 192 for instructions on starting and stopping the engine. Warning! P82.
Important! Notes: If the electronic key is left in the steering lock position 0 for an extended period of time, it can no longer be turned in the lock. In this case, remove electronic key from steering lock and reinsert. A warning sounds when the driver’s door is opened while the electronic key is in steering lock position 1 or 0. With the engine at idle speed, the charging rate of the alternator (output) is limited.
Instruments and controls Operation Driving Instrument cluster display Starting and turning off the engine Practical hints Car care Technical data 192 Starting and turning off the engine Important! Before starting Due to the installed starter non-repeat feature, the electronic key must be turned completely to the left before attempting to start the engine again. Ensure that parking brake is engaged and that selector lever is in position “P” or “N”.
Automatic transmission The automatic transmission selects individual gears automatically, dependent upon • Selector lever position • Program mode selector • Accelerator position • Vehicle speed The gear shifting process is continuously adapted, dependent on the driving style, the driving situation and the road characteristics. Important! When parking the vehicle or before working on the vehicle with the engine running, firmly depress the parking brake pedal and shift the selector lever into “P”.
Instruments and controls Operation Driving Instrument cluster display Automatic transmission Practical hints Car care Technical data 194 Driving Important! The selector lever is automatically locked while in position “P”. To move the selector lever out of position “P”, the service brake pedal must be firmly depressed before the shift lock will release.
Stopping Rocking a vehicle free in this manner may cause the ABS or traction system malfunction indicator lamp to come on. Turn off and restart the engine to clear the malfunction indication. For brief stops, e.g. at traffic lights, leave the transmission in gear and hold vehicle with the service brake. For longer stops with the engine idling, shift into “N” or “P” and hold the vehicle with the service brake.
Instruments and controls Operation Driving Instrument cluster display Automatic transmission Selector lever position 10 Practical hints Car care Technical data 196 Park position The park position is to be used when parking the vehicle. Engage only with the vehicle stopped. The park position is not intended to serve as a brake when the vehicle is parked. Rather, the driver should always use the parking brake in addition to placing the selector lever in park to secure the vehicle.
Gear selection for special circumstances Dependent on the program mode selector switch position “S” or “W” the maximum speed in the reverse gear is different. However, it is not possible to change the program mode while in reverse. The transmission gear ranges for special circumstances can be selected by pressing the selector lever to the right or the left with the selector lever in position “D”. The gear range currently selected is indicated in the instrument cluster display.
Instruments and controls Operation Driving Instrument cluster display Automatic transmission Press and hold selector lever in the æ direction: The transmission will shift from the current gear directly to gear range “D”. Warning! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle’s ABS will not prevent this type of loss of control.
Gear ranges: Upshift through 2nd gear only. For driving in mountainous regions or under extreme operating conditions. This gear selection will allow use of the engine’s braking power when descending steep grades. Upshift through 4th gear only. Suitable for performance driving. Upshift through 3rd gear only. Suitable for moderately steep hills. Since the transmission does not shift higher than 3rd gear, this gear selection will allow use of the engine’s braking power downhill.
Instruments and controls Operation Driving Instrument cluster display Automatic transmission Program mode selector switch Practical hints Car care Technical data 200 S Standard mode Press switch on symbol “S”. Use this mode for all regular driving. The vehicle starts out in 1st gear.
W Emergency operation (Limp home mode) Winter/Wet (snow and ice) mode Press switch on symbol “W”. The vehicle starts out in 2nd gear, except with selector lever in 1st gear, or with accelerator pedal in kick-down position. If vehicle acceleration worsens or the transmission no longer shifts, the transmission is most likely operating in Limp Home Mode which engages when there is a malfunction of the transmission.
Instruments and controls Operation Driving Instrument cluster display Parking brake Practical hints Car care Technical data 202 Parking brake To engage, firmly depress parking brake pedal. When the electronic key is in steering lock position 2, the brake warning lamp in the instrument cluster should come on brightly. To release the parking brake, pull handle on instrument panel. The brake warning lamp in the instrument cluster should go out.
Driving instructions Drinking and driving Drive sensibly - Save Fuel Warning! Fuel consumption, to a great extent, depends on driving habits and operating conditions. Drinking or taking drugs and driving can be a very dangerous combination. Even a small amount of alcohol or drugs can affect your reflexes, perceptions and judgement. To save fuel you should: The possibility of a serious or even fatal accident is sharply increased when you drink or take drugs and drive.
Instruments and controls Operation Driving Instrument cluster display Driving instructions Power assistance Warning! Practical hints Car care Technical data 204 The condition of the parking brake system is checked each time the vehicle is in the shop for the required maintenance service. When the engine is not running, the brake and steering systems are without power assistance. Under these circumstances, a much greater effort is necessary to stop or steer the vehicle.
Caution! Parking When driving down long and steep grades, relieve the load on the brakes by shifting into a lower gear to use the engine’s braking power. This helps prevent overheating of the brakes and reduces brake pad wear.
Instruments and controls Operation Driving Instrument cluster display Driving instructions Practical hints Car care Technical data 206 Tires Warning! If you feel a sudden significant vibration or ride disturbance, or you suspect that possible damage to your vehicle has occurred, you should turn on the hazard warning flashers, carefully slow down, and drive with caution to an area which is a safe distance from the roadway. Inspect the tires and under the vehicle for possible damage.
Tire traction Specified tire pressures must be maintained. This applies particularly if the tires are subjected to high loads (e.g. high speeds, heavy loads, high ambient temperatures). The safe speed on a wet, snow covered or icy road is always lower than on a dry road. You should pay particular attention to the condition of the road whenever the outside temperatures are close to the freezing point. Warning! Do not drive with a flat tire. A flat tire affects the ability to steer or brake the vehicle.
Instruments and controls Operation Driving Instrument cluster display Driving instructions Tire speed rating E 320 and E 430: Your vehicle is factory equipped with “H”-rated tires, which have a speed rating of 130 mph (210 km/ h). An electronic speed limiter for models E 320 and E 430 prevents your vehicle from exceeding the speed rating. Model E 55 AMG: Your vehicle is factory equipped with “Z”-rated tires. An electronic speed limiter prevents your vehicle from exceeding a speed of 155 mph (250 km/ h).
Winter driving instructions Warning! The most important rule for slippery or icy roads is to drive sensibly and to avoid abrupt acceleration, braking and steering maneuvers. Do not use the cruise control system under such conditions. If the vehicle becomes stuck in snow, make sure that snow is kept clear of the exhaust pipe and from around the vehicle with engine running. Otherwise, deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death.
Instruments and controls Operation Driving Instrument cluster display Driving instructions Winter driving Have your vehicle winterized at your authorized Mercedes-Benz Center before the onset of winter. • Change the engine oil if the engine contains an oil which is not approved for winter operation. For viscosity (SAE/CCMC class) and filling quantity, see page 318. • Check engine coolant anticorrosion/ antifreeze concentration.
Deep water Traveling abroad Abroad, there is a widely-spread Mercedes-Benz service network at your disposal. If you plan to travel into areas which are not listed in the index of your Mercedes-Benz Center directory, you should request pertinent information from your authorized Mercedes-Benz Center. Caution! Do not drive through flooded areas or water of unknown depth.
Instruments and controls Operation Driving Instrument cluster display Driving systems Cruise control Practical hints Car care Technical data 212 1 Accelerate and set: Lift lever briefly to set speed. Hold lever up to accelerate. 2 Decelerate and set: Depress lever briefly to set speed. Hold lever down to decelerate. Normally the vehicle is accelerated to the desired speed with the accelerator. Speed is set by briefly pushing the lever to position 1 or 2. The accelerator can then be released.
3 Canceling Important! To cancel the cruise control, briefly push lever to position 3. Moving gear selector lever to position “N” switches the cruise control off. When you step on the brake pedal or the vehicle speed drops below approximately 25 mph (40 km / h), for example when driving upgrade, the cruise control will be canceled. Warning! Only use the cruise control if the traffic and weather conditions make it advisable to travel at a steady speed.
Instruments and controls Operation Driving Instrument cluster display Driving systems Notes: If the engine does not brake the vehicle sufficiently while driving on a downgrade, the speed you set on the cruise control may be exceeded. In this case the automatic transmission shifts down (max. to 3rd gear) to maintain the set cruise control speed by using the engine’s braking power.
Brake assist system (BAS) The BAS is designed to maximize the vehicle’s braking capability during emergency braking maneuvers by having maximum power boost applied to the brakes more quickly in emergency braking conditions than might otherwise be afforded solely by the driver’s braking style. This can help reduce braking distances over what ordinary driving and braking style might do. The BAS complements the antilock brake system (ABS).
Instruments and controls Operation Driving Instrument cluster display Driving systems The malfunction indicator lamps for the ESP are combined with the BAS malfunction indicator lamp. The BAS/ESP malfunction indicator lamp in the instrument cluster comes on with the electronic key in steering lock position 2 and should go out with the engine running. If the BAS/ESP malfunction indicator lamp comes on permanently while the engine is running, a malfunction has been detected in either system.
Antilock brake system (ABS) At the instant one of the wheels is about to lock up, a slight pulsation can be felt in the brake pedal, indicating that the ABS is in the regulating mode. Keep firm and steady pressure on the brake pedal while experiencing the pulsation. Warning! Do not pump the brake pedal, rather use firm, steady brake pedal pressure. Pumping the brake pedal defeats the purpose for ABS and significantly reduces braking effectiveness.
Instruments and controls Operation Driving Instrument cluster display Driving systems ABS control The ABS malfunction indicator lamp - in the instrument cluster comes on with the electronic key in steering lock position 2 and should go out with the engine running. When the ABS malfunction indicator lamp in the instrument cluster comes on while the engine is running, it indicates that the ABS has detected a malfunction and has switched off.
Four Wheel Electronic Traction System (4MATIC) with Electronic Stability Program (ESP) (Model with All Wheel Drive [AWD]) Caution! Operational tests with the engine running can only be conducted on a 2-axle dynamometer.Otherwise the ESP will immediately be engaged and will apply the brakes to the spinning wheels. The 4MATIC improves vehicle’s ability to use available traction, e.g. during winter operation in mountains under snowy conditions, by applying power to all four wheels.
Instruments and controls Operation Driving Instrument cluster display Driving systems Electronic stability program (ESP) Warning! ESP cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded. The ESP cannot prevent accidents, including those resulting from excessive speed in turns, or aquaplaning. Only a safe, attentive, and skillful driver can prevent accidents.
Notes: Driving the vehicle with varied size tires will cause the wheels to rotate at different speeds, therefore the ESP may activate (yellow ESP warning lamp in speedometer dial comes on). For this reason, all wheels, including the spare wheel, must have the same tire outside diameter. The malfunction indicator lamp for the ESP is combined with that of the BAS.
Instruments and controls Operation Driving Instrument cluster display Driving systems ESP control switch Practical hints Car care Technical data 222 To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand or gravel, switch off ESP by pressing the upper half (1) of the ESP switch. The ESP warning lamp v, located in the speedometer dial, is continuously illuminated. Warning! When the ESP warning lamp is illuminated continuously, the ESP is switched off.
Note: Warning! Avoid spinning of one drive wheel. This may cause serious damage to the drive train which is not covered by the Mercedes-Benz Limited Warranty. ESP should not be switched off during normal driving other than in circumstances described above. Disabling of the system will reduce vehicle stability in standard driving maneuvers. The ESP warning lamp, located in the speedometer dial, starts to flash at any vehicle speed as soon as the tires lose traction and the wheels begin to spin.
Instruments and controls Operation Driving Instrument cluster display Parking system Parking assist (Parktronic) (optional) The Parktronic system assists the driver during parking maneuvers. It visually and audibly indicates the distance between the vehicle and an obstacle. The front area of the vehicle is monitored when driving forward. When reversing, the front as well as the rear areas are monitored.
Sensors A total of 10 sensors (1) monitor the vehicle’s front and rear areas. Six sensors are located in the front bumper, four sensors in the rear bumper. For proper operation of the Parktronic always keep the sensors clean, especially at times of snow and ice. See page 303 for instructions on cleaning the sensors in the bumpers. 1 1 1 P88.
Instruments and controls Operation Driving Parking system Instrument cluster display Practical hints Car care Technical data 226 Warning indicators Visual and audible signals indicate to the driver the relative distance between the vehicle and an obstacle. Warning indicators for the front area are located above the center air outlets in the dashboard. 1 2 1 2 Warning indicators for the rear area are located in the rear passenger compartment lamp.
Monitoring reach of sensors P54.65-2298-26 P54.65-2297-26 Front bumper: Center approx. 40 in (100 cm) Corner approx. 24 in (60 cm) The first yellow segment lights up at these distances. Additional segments light up as the vehicle comes closer to the obstacle. Minimum distance between vehicle and obstacle at which the system stops indicating: Rear bumper: Front corners Center approx. 48 in (120 cm) Corner approx. 32 in (80 cm) Parking system Instruments and controls approx.
Instruments and controls Operation Driving Instrument cluster display Parking system The obstacle may not be recognized if outside the shaded sensor field, and no longer be indicated when approaching it any closer (warning indicators go out). Practical hints Car care Technical data 228 Parktronic switch Parktronic malfunction All red segments of the warning indicators light up, and a warning sounds for 3 seconds, if Parktronic does not function properly. 3 A dirty sensor could be the reason.
What you should know at the gas station Open flap by pushing near front (arrow). Turn fuel cap to the left and hold on to it until possible pressure in tank has been released, then remove cap. Failure to remove slowly could result in personal injury. See page 296 for notes on fuel filler flap, manual release. Fuel To prevent fuel vapors from escaping into open air, fully insert filler nozzle unit. Only fill fuel tank until the filler nozzle unit cuts out — do not top up or overfill.
Instruments and controls Operation Driving Instrument cluster display What you should know at the gas station Fuel tank capacity approximately 21.1 US gal (80.0 l). This includes approximately 2.6 US gal (10.0 l) reserve. Use premium unleaded gasoline: Posted Octane Index 91 (Average of 96 RON/ 86 MON). Practical hints Car care Technical data 230 Tire pressure For tire pressure, refer to tire pressure label inside the fuel filler flap.
Check regularly and before a long trip 1 Windshield washer system For refilling reservoir see page 263. 2 Headlamp cleaning system Auxiliary tank connected to windshield washer reservoir. Open filler caps on both reservoirs during refilling. 3 3 Coolant level See “Adding coolant”, page 262. 5 4 4 Engine oil level See “Checking engine oil level”, page 260. 1 2 5 Brake fluid See “Brake fluid”, page 320. Opening hood, see page 257. E 320 shown Vehicle lighting: Check function and cleanliness.
Instrument cluster display Malfunction and indicator lamps in the instrument cluster ....................234 On-board diagnostic system .....234 Check engine malfunction indicator lamp .............................234 Brake warning lamp ..................235 Supplemental restraint system (SRS) indicator lamp .............................236 Fuel reserve and fuel cap placement warning ....................236 Electronic stability program (ESP) — warning lamp ...............
Instruments and controls Operation Driving Instrument cluster display Malfunction and indicator lamps Malfunction and indicator lamps in the instrument cluster General information: If a bulb in the instrument cluster fails to light up during the bulb self-check when turning the electronic key in steering lock to position 2, have it checked and replaced if necessary. On-board diagnostic system Check engine malfunction indicator lamp Engine malfunction indicator lamp.
An on-board diagnostic connector is located in the passenger compartment near to the parking brake pedal, allowing the accurate identification of system malfunctions through the readout of diagnostic trouble codes. Warning! Driving with the brake warning lamp illuminated can result in an accident. Have your brake system checked immediately if the brake warning lamp stays on. Don’t add brake fluid before checking the brake system.
Instruments and controls Operation Driving Instrument cluster display Malfunction and indicator lamps Supplemental restraint system (SRS) indicator lamp The operational readiness of the airbag system is verified by the indicator lamp “SRS” in the instrument cluster when turning the electronic key in steering lock to position 1 or 2.
Electronic stability program (ESP) — warning lamp ABS malfunction indicator lamp The yellow ESP warning lamp in the speedometer dial comes on with the electronic key in steering lock position 2. It should go out with engine running. The ABS malfunction indicator lamp in the instrument cluster comes on with the electronic key in steering lock position 2 and should go out with the engine running. See page 219 and 220 if the warning lamp lights up or flashes when the vehicle is moving.
Instruments and controls Operation Driving Instrument cluster display Malfunction and indicator lamps Seat belt warning lamp With the electronic key in steering lock position 2, the seat belt warning lamp comes on and a warning sounds for approximately 6 seconds if the driver’s seat belt is not fastened.
Malfunction and warning messages in the multifunction display Notes: Malfunction and warning messages for the following systems will be displayed immediately in the multifunction display. Certain malfunction and warning messages are accompanied by an audible signal. Malfunction and warning messages in red are always accompanied by an audible signal.
Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 240 DISPLAY DEFECTIVE (engine control unit) DISPLAY DEFECTIVE (several systems) Line 1 Line 2 Line 1 Line 2 DISPLAY DEFECTIVE VISIT WORKSHOP! DISPLAY DEFECTIVE VISIT WORKSHOP! This message is displayed to indicate that the information being relayed by the engine control unit is no longer complete.
BATTERY/ALTERNATOR This message indicates a malfunction which must be repaired immediately. It may indicate that the poly-V-belt has broken. Should this condition occur, the poly-V-belt must be replaced before continuing to operate the vehicle. Otherwise, the engine will overheat due to an inoperative water pump which may result in damage to the engine. Do not continue to drive the vehicle with this message displayed.
Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 242 ABS-SYSTEM BRAKE ASSIST P54.30-2938-21 Line 1 Line 2 Line 1 Line 2 ABS-SYSTEM VISIT WORKSHOP! BRAKE ASSIST VISIT WORKSHOP! A malfunction has been detected in the system. The brake system functions in the usual manner, but without antilock assistance. With the ABS malfunctioning, the BAS and ESP are also switched off.
BRAKE FLUID BRAKE LINING WEAR Line 1 Line 2 Line 1 Line 2 BRAKE LINING WEAR VISIT WORKSHOP! BRAKE FLUID VISIT WORKSHOP! When this message appears during braking, it indicates that the brake pads are worn down. Warning! Driving with this message displayed can result in an accident. Have your brake system checked immediately. Don’t add brake fluid before checking the brake system.
Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 244 PARKING BRAKE ENGINE FAN Line 1 Line 2 Line 1 Line 2 PARKING BRAKE RELEASE BRAKE! ENGINE FAN VISIT WORKSHOP!1 Parking brake, see page 202. 1 The cooling fan for the coolant is faulty. Observe the coolant temperature gauge while driving, see page 90.
COOLANT (coolant level) The low engine coolant level warning should not be ignored. Extended driving with the symbol displayed may cause serious engine damage not covered by the Mercedes-Benz Limited Warranty. In cases of major or frequent minor coolant loss, have the cooling system checked at your authorized Mercedes-Benz Center as soon as possible. Notes: Line 1 Line 2 COOLANT CHECK LEVEL! Do not drive without coolant in the cooling system. The engine will overheat causing major engine damage.
Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 246 COOLANT TEMP. During severe operating conditions and stop-and-go city traffic, the coolant temperature may rise close to the red marking. The engine should not be operated with the coolant temperature in the red zone. Doing so may cause serious engine damage which is not covered by the Mercedes-Benz Limited Warranty.
LIGHTING SYSTEM When the message appears after starting the engine, or if it come on while driving, this indicates a failure in the parking lamp, taillamp, stop lamp, or low beam headlamp. See page 285 for instructions on replacing bulbs. If an exterior lamp fails, the message will appear only when that lamp is switched on. If a brake lamp fails, the message will appear when applying the brake and stays on until the engine is turned off.
Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages LIGHT SENSOR Practical hints Car care Technical data 248 REMOVE KEY P54.30-3573-21 With the electronic key removed and the driver’s door open, a warning sounds and the message “SWITCH OFF LIGHTS!” appears in the multifunction indicator if the vehicle’s exterior lamps (except standing lamps) are not switched off.
TELE AID STEERING GEAR OIL Line 1 Line 2 Line 1 Line 2 TELE AID VISIT WORKSHOP! STEERING GEAR OIL VISIT WORKSHOP! System without or with insufficient steering gear oil level. Danger of damage to steering gear exists. 1 The Tele Aid system consists of three types of response; automatic and manual emergency, roadside assistance and information. With this message displayed, one or more functions may not be available.
Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages Practical hints Car care Technical data 250 ENGINE OIL LEVEL 3 There is a risk of damaging the engine or catalytic converter. The engine oil level must be checked immediately. See Engine oil level indicator on page 117. 4 The engine oil level has dropped to a critical level. Check the engine oil level immediately.
WASHER FLUID When this message appears while the engine is running, the level of the reservoir has dropped to approximately 1/3 of the total volume. The reservoir should be refilled with the prescribed mixture of MB Windshield Washer Concentrate “S” and water or the Concentrate and commercially available premixed windshield washer solvent/antifreeze, depending on ambient temperature, at the next opportunity. The reservoir for the windshield and headlamp washer systems is located in the engine compartment.
Instruments and controls Operation Driving Instrument cluster display Malfunction and warning messages 252 ELEC. STABIL. PROG. (Electronic stability program) Line 1 Line 2 DISPLAY DEFECTIVE VISIT WORKSHOP! ELEC. STABIL. PROG. VISIT WORKSHOP!1, 2, 3 1 A malfunction has been detected in the system. Pressing the accelerator pedal will require greater effort. Only partial engine output will be available.
Practical hints First aid kit .....................................254 Stowing things in the vehicle ......254 Fuses ................................................255 Hood .................................................257 Checking engine oil level .............260 Automatic transmission fluid level ................................... 261 Coolant level ................................... 261 Adding coolant ...........................262 Windshield and headlamp washer system ...........................
Instruments and controls Operation Driving Instrument cluster display First aid kit Practical hints Car care Technical data 254 First aid kit Stowing things in the vehicle Warning! To help avoid personal injury during a collision or sudden maneuver, exercise care when stowing things. Put luggage or cargo in the trunk if possible. Do not pile luggage or cargo higher than the seat backs. Do not place anything on the shelf below the rear window. 1 P91.
Fuses Before replacing a blown fuse, determine the cause of the short circuit. Spare fuses are supplied inside the main fuse box. Observe amperage and color of fuse. 1 A special fuse puller is supplied with the vehicle tools. Always use a new fuse for replacement. Never attempt to repair or bridge a blown fuse. A fuse chart can be found inside the corresponding fuse box cover. P54.
Instruments and controls Operation Driving Instrument cluster display Fuses Practical hints Car care Technical data 256 2 Auxiliary fuse box below rear seat bench 3 Auxiliary fuse box to left of exterior lamp switch To gain access, remove rear seat bench. See page 294. To again access, open door, pry off cover and remove.
Hood If you see flames or smoke coming from the engine compartment, or if the coolant temperature gauge indicates that the engine is overheated, do not open the hood. Move away from vehicle and do not open the hood until the engine has cooled. If necessary, call a fire department. Warning! To help prevent personal injury, stay clear of moving parts when the hood is open and the engine is running. Be sure the hood is properly closed before driving.
Instruments and controls Operation Driving Instrument cluster display Engine compartment Practical hints Car care Technical data 258 To open: To unlock the hood, pull release lever (1) under the driver’s side of the instrument panel. At the same time a handle will extend out of the radiator grill (it may be necessary to lift the hood up slightly). Caution! To avoid damage to the windshield wiper or hood, open the hood only with wiper in the parked position. P68.
To close: Lower hood and let it drop into lock from a height of approximately 1 ft. (30 cm), assisting with hands placed flat on edges of hood (3). To avoid hood damage, please make sure that hood is fully closed. If not, repeat closing procedure. Do not push down on hood to attempt to fully close it. Pull handle (2) to its stop out of radiator grill and open hood (do not pull up on handle).
Instruments and controls Operation Driving Instrument cluster display Engine compartment Practical hints Car care Technical data 260 Checking engine oil level The engine oil level can be checked by either the oil dipstick or via the multifunction display in the instrument cluster. Wipe oil dipstick clean prior to checking the engine oil level. Fully insert dipstick in tube, and remove after three seconds to obtain accurate reading.
Automatic transmission fluid level Coolant level The transmission has a permanent fill of automatic transmission fluid. Regular automatic transmission fluid level checks and changes are not required. For this reason the dipstick is omitted. If you notice fluid leaks or gear shifting malfunctions, have your authorized Mercedes-Benz Center check the transmission fluid level. To check the coolant level, the vehicle must be parked on level ground and the engine stopped.
Instruments and controls Operation Driving Instrument cluster display Engine compartment Adding coolant If coolant has to be added, a 50/50 mixture of water and MB anticorrosion/antifreeze should be added. The drain plugs for the cooling system are located on the right side of the engine block and at the bottom of the radiator. Anticorrosion/antifreeze, see page 322.
Windshield and headlamp washer system Windshield and headlamp washer fluid mixing ratio For temperatures above freezing: MB Windshield Washer Concentrate “S” and water. 1 part “S” to 100 parts water (40 ml “S” to 1 gallon water). For temperature below freezing: MB Windshield Washer Concentrate “S” and commercially available premixed windshield washer solvent/ antifreeze. 1 2 1 part “S” to 100 parts solvent (40 ml “S” to 1 gallon solvent).
Instruments and controls Operation Driving Instrument cluster display Spare wheel Practical hints Car care Technical data 264 Spare wheel, vehicle tools, storage compartment 2 To remove spare tire: Turn luggage bowl counterclockwise and remove. 1 To store spare tire: Place spare tire in wheel well and secure it with luggage bowl. Turn luggage bowl clockwise to its stop. 3 Note: Always lower trunk floor before closing trunk lid. 4 P40.
Vehicle jack Warning! The jack is designed exclusively for jacking up the vehicle at the jack tubes built into either side of the vehicle. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change. Never get beneath the vehicle while it is supported by the jack. Keep hands and feet away from the area under the lifted vehicle. Always firmly set parking brake and block wheels before raising vehicle with jack. 2 1 Do not disengage parking brake while the vehicle is raised.
Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Practical hints Car care Technical data 266 Wheels Warning! Replace rims or tires with the same designation, manufacturer and type as shown on the original part. See your authorized Mercedes-Benz Center for further information. Worn, old tires can cause accidents. If the tire tread is badly worn, or if the tires have sustained damage, replace them.
Rotating wheels Notes: Rotation of wheels does not apply to model E 55 AMG with summer tires. Thoroughly clean the inner side of the wheels any time you rotate the wheels or wash the vehicle underside. The wheels can be rotated according to the degree of tire wear while retaining the same direction of travel. The use of retread tires is not recommended. Retread tires may adversely affect the handling characteristics and safety of the vehicle.
Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Practical hints Car care Technical data 268 Spare wheel Steel spare wheel rim (E 320 without sport package) 1 Important! Unidirectional tires must always be mounted with arrow on tire sidewall pointing in direction of vehicle forward movement.
Spare wheel (E 320 with sport package, E 430) Unidirectional tires must always be mounted with arrow on tire sidewall pointing in direction of vehicle forward movement. Important! If the arrow on tire side wall does not point in direction of vehicle forward movement when using the spare wheel, observe the following restrictions: The spare wheel rim is mounted with a full size tire of the same type as on the vehicle, and is fully functional.
Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Spare wheel (E 55 AMG) The spare wheel rim size is 7 1/2 J x 17 H 2 with tire size 235/45 R 17 93 W. Important! In the case of a flat tire or breakdown, you may temporarily use the wheel when observing the following restrictions: • Do not exceed vehicle speed of 50 mph (80 km/ h). • Drive to the nearest repair facility to have the flat tire repaired or replaced as appropriate.
Changing wheels Move vehicle to a level area which is a safe distance from the roadway. Warning! 1. Set parking brake and turn on hazard warning flasher. The jack is designed exclusively for jacking up the vehicle at the jack tubes built into either side of the vehicle. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change. Never get beneath the vehicle while it is supported by the jack. Keep hands and feet away from the area under the lifted vehicle.
Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Practical hints Car care Technical data 272 P40.10-2132-26 4. Using the wrench, loosen but do not yet remove the wheel bolts. 5. Remove the protective cover from the jack support tube opening by inserting the screwdriver (supplied in the tool kit) in the opening and prying it out. The tube openings are located directly behind the front wheel housings and in front of the rear wheel housings.
1 P40.10-2133-26 P40.10-2134-26 8. Unscrew upper-most wheel bolt and install alignment bolt (1) supplied in the tool kit. Remove the remaining bolts. Keep bolt threads protected from dirt and sand. 6. Insert jack arm fully into the tube hole up to the stop. Place jack on firm ground. Position the jack so that it is always vertical (plumb-line) as seen from the side (see arrow), even if the vehicle is parked on an incline. 9. Remove wheel. Grip wheel from the sides. Keep hands from beneath the wheels.
Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Practical hints Car care Technical data 274 10. Clean contact surfaces of wheel and wheel hub. Install wheel on wheel hub. Insert wheel bolts and tighten them slightly. To avoid paint damage, place wheel flat against hub and hold it there while installing first wheel bolt. 1 Unscrew the alignment bolt (1) to install the last wheel bolt. P40.
Warning! Always replace wheel bolts that are damaged or rusted. Never apply oil or grease to wheel bolts. 3 Damaged wheel hub threads should be repaired immediately. 1 5 4 Incorrect mounting bolts or improperly tightened mounting bolts can cause the wheel to come off. This could cause an accident. Be sure to use the correct mounting bolts. 2 P40.10-2136-26 Warning! 11. Lower vehicle. Remove jack and insert jack tube cover.
Instruments and controls Operation Driving Instrument cluster display Tires, Wheels Tire inflation pressure A table (see fuel filler flap) lists the tire inflation pressures specified for Mercedes-Benz recommended tires as well as for the varying operating conditions. Important! Tire pressure changes by approximately 1.5 psi (0.1 bar) per 18°F (10°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage especially in the winter.
If a tire constantly loses air, it should be inspected for damage. Battery The spare tire should be checked periodically for condition and inflation. Spare tire will age and become worn over time even if never used, and thus should be inspected and replaced when necessary. Warning! Failure to follow these instructions can result in severe injury or death. Never lean over batteries while connecting, you might get injured. Warning! Battery fluid contains sulfuric acid.
Instruments and controls Operation Driving Instrument cluster display Battery Practical hints Car care Technical data 278 must not leak acid when upside down for at least 15 minutes. Your authorized Mercedes-Benz Center can provide such a special battery. operation. During removal and installation always protect the disconnected battery positive (+) terminal with the cover attached to the battery. The service life of the battery is dependent on its condition of charge.
Jump starting Important! A discharged battery can freeze at approximately +14°F (-10°C). In that case, it must be thawed out before jumper cables are used. Attempting to jump start a frozen battery can result in it exploding, causing personal injury. Warning! Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries while connecting or jump starting, you might get injured.
Instruments and controls Operation Driving Instrument cluster display Jump starting Practical hints Car care Technical data 280 Proceed as follows: 1. Position the vehicle with the charged battery so that the jumper cables will reach, but never let the vehicles touch. Make sure the jumper cables do not have loose or missing insulation. 2. On both vehicles: • Turn off engine and all lights and accessories, except hazard warning flashers or work lights.
4. Clamp one end of the second jumper cable to the grounded negative (–) terminal of the charged battery and the final connection to the negative (–) under hood terminal (3) of the disabled vehicle. 6. After the engine has started, remove jumper cables by exactly reversing the above installation sequence, starting with the last connection made first. When removing each clamp, make sure that it does not touch any other metal while the other end is still attached. Important! 5.
Instruments and controls Operation Driving Instrument cluster display Towing the vehicle Practical hints Car care Technical data 282 Towing the vehicle Prior to towing the vehicle with all wheels on the ground, make certain that the electronic key is in steering lock position 2. If the electronic key is left in the steering lock position 0 for an extended period of time, it can no longer be turned in the lock. In this case, the steering is locked.
We recommend that the vehicle be transported using flat bed equipment. This method is preferable to other types of towing. Note: To signal turns while being towed with hazard warning flasher in use, turn electronic key in steering lock to position 2 and activate combination switch for left or right turn signal in usual manner – only the selected turn signal will operate.
Instruments and controls Operation Driving Instrument cluster display Towing the vehicle Transmission selector lever, manually unlocking Practical hints Car care Technical data 284 To do so, insert a pin (1), e.g. ball point pen, into the covered opening below the position “D” of the shift pattern. While pushing the pin down, move selector lever from position “P”. After removal of the pin from the opening, the cover will not close fully.
Exterior lamps Notes: Replacing bulbs To prevent a possible electrical short circuit, switch off lamp prior to replacing a bulb. Warning! When replacing bulbs, install only 12 volt bulbs with the specified watt rating. Bulbs and bulb holder can be very hot. Allow the lamp to cool down before changing a bulb. When replacing halogen bulbs do not touch glass portion of bulb with bare hands. Use plain paper or a clean cloth. Halogen lamps contain pressurized gas.
Instruments and controls Operation Driving Instrument cluster display Exterior lamps Practical hints Technical data Car care 286 Headlamp assembly 3 1 2 1 4 5 1 1 6 P82.
Bulbs for high and low beam H7 (55 W) Bulbs for high beam H7 (55 W) Open hood. Open hood. Twist cover (1 or 2) counterclockwise and remove. Twist cover (2) counterclockwise and remove. Pull off electrical connector (4) or (5). Pull off electrical connector. Twist bulb holder counterclockwise and remove bulb from it. Twist bulb holder counterclockwise and remove bulb from it. Insert the new bulb so that its base fits in recess of the holder.
Instruments and controls Operation Driving Instrument cluster display Exterior lamps Practical hints Car care Technical data 288 Turn signal lamp 1156 NA (26.9/5 W/32/4 cp bulb) Parking and standing lamp H 6W (6 W bulb) Open hood. Open hood. Twist bulb socket (3) counterclockwise and pull out. Push bulb into socket, turn counterclockwise and remove. Twist cover (2) counterclockwise and remove. Insert new bulb in socket, push in and twist clockwise. Reinstall bulb socket.
Taillamp assemblies 1 3 2 P82.10-2204-26 4 Driver’s side: Rear fog lamp (21 W/32 cp bulb) Open trunk lid. Swing cover aside. 5 Backup lamp (21 W/32 cp bulb) 1 Turn signal lamp (21 W/24 cp bulb) Twist bulb socket counterclockwise and pull out. Push bulb into socket, turn counterclockwise and remove. 2 Stop, tail and parking lamp (21/4 W bulb) 3 Tail, parking and side marker lamp (5 W/4 cp bulb) Exterior lamps Instruments and controls Insert new bulb in socket, push in and twist clockwise.
Instruments and controls Operation Driving Instrument cluster display Exterior lamps Side marker lamp, front Practical hints Car care Technical data 290 High mounted stop lamp, Additional turn signals on the exterior mirror The high mounted stop lamp (3rd brake lamp), and the additional turn signals on the exterior mirrors are equipped with LED’s. Have the system checked at an authorized Mercedes-Benz Center if a malfunction occurs.
Changing batteries in the electronic main key 2 1 3 4 P80.20-2201-26 P80.35-2029-26 1 Transmit buttons Changing batteries 2 Lamp for battery check and function control Move locking tab (3) in direction of right arrow and remove mechanical key (4, left arrow). Checking batteries If one of the transmit buttons (1) is pressed, the battery check lamp (2) lights up briefly – indicating that the batteries are in order. Change batteries if the battery check lamp (2) does not light up briefly.
Instruments and controls Operation Driving Instrument cluster display Electronic main key Practical hints Technical data Car care 292 7 8 5 4 6 P80.35-2025-26 Insert mechanical key (4) in side opening (5) to open latch. Press briefly (do not use mechanical key as lever) to release battery compartment. Remove mechanical key from side opening. Carefully remove battery compartment in direction of arrow (6). P80.
Important! Emergency engine shut-down Batteries contain materials that can harm the environment if disposed of improperly. Recycling of batteries is the preferred method of disposal. For disposal, please follow manufacturer’s recommendation on battery package. If the engine can no longer be stopped using the electronic key, the engine can be turned off by removing two fuses. Replacement Battery: Lithium, type CR 2025 or equivalent.
Instruments and controls Operation Driving Instrument cluster display Rear seat cushion Practical hints Car care Technical data 294 Rear seat cushion Removal: Pull locking tabs up (on left and right side of seat) and lift seat at the front. Installation: Guide seat belt buckles through openings in seat cushion. Slide rear edge of cushion under the backrest as far as it will go, and push front of cushion down until it locks in place.
Emergency operation of sliding /pop-up roof 1 P77.20-2037-26 The sliding/pop-up roof can be opened or closed manually should an electrical malfunction occur. To slide the roof closed or to raise the roof at the rear: turn crank clockwise. The sliding/pop-up roof drive is located behind the lens of the left interior lamp between the sun visors. To slide the roof open or to lower the roof at the rear: turn crank counterclockwise. 1. Pry off lens (1) by using a screw driver. Note: 2. Remove cover (2).
Instruments and controls Operation Driving Instrument cluster display Manual release for fuel filler flap Practical hints Car care Technical data 296 Manual release for fuel filler flap Replacing wiper blade insert For safety reasons, remove electronic key from steering lock before replacing the wiper blade, otherwise the motor can suddenly turn on and cause injury. Notes: Do not open engine hood with wiper arm folded forward.
Removal: Installation: Fold wiper arm forward. Press safety tab down (1), push wiper blade downward (2) and remove. Slide (direction of arrow) wiper blade insert into retainer claws until tabs are engaged. Place wiper blade on firm support. Press down both tabs and slide (direction of arrow) the wiper blade insert out of the retainer claws. Insert wiper blade between tabs (3) on the wiper arm, and slide into end of wiper arm. Press safety tab upward until it locks in place.
Instruments and controls Operation Driving Instrument cluster display Trunk lamp, Roof rack Practical hints Car care Technical data 298 Trunk lamp Roof rack If the trunk is to remain open for a long period of time, the trunk lamp can be switched off by pulling out the plunger in the switch (arrow). This prevents the vehicle battery from being discharged. Use only those roof racks approved by Mercedes-Benz to avoid damage to the vehicle. Follow manufacturer’s installation instructions.
Vehicle care Cleaning and care of the vehicle .............................300 Power washer ..............................301 Tar stains .....................................301 Paintwork, painted body components .................................301 Engine cleaning ..........................302 Vehicle washing .........................302 Ornamental moldings ................302 Headlamps, taillamps, turn signal lenses ......................302 Cleaning the parktronic system sensors .........................
Instruments and controls Operation Driving Instrument cluster display Cleaning and care of the vehicle Cleaning and care of the vehicle Warning! Many cleaning products can be hazardous. Some are poisonous, others are flammable. Always follow the instructions on the particular container. Always open your vehicle’s doors or windows when cleaning the inside. Never use fluids or solvents that are not designed for cleaning your vehicle.
Tar stains Scratches, corrosive deposits, corrosion or damage due to negligent or incorrect care cannot always be removed or repaired with the car-care products recommended here. In such cases it is best to seek aid at your authorized Mercedes-Benz Center. Quickly remove tar stains before they dry and become more difficult to remove. A tar remover is recommended.
Instruments and controls Operation Driving Instrument cluster display Cleaning and care of the vehicle Engine cleaning Prior to cleaning the engine compartment make sure to protect electrical components and connectors from the intrusion of water and cleaning agents. Corrosion protection, such as MB Anticorrosion Wax should be applied to the engine compartment after every engine cleaning. Before applying, all control linkage bushings and joints should be lubricated.
Cleaning the parktronic system sensors Window cleaning Use a window cleaning solution on all glass surfaces. An automotive glass cleaner is recommended. Note: For safety reasons, remove electronic key from steering lock before cleaning the windshield, otherwise the wiper motor can suddenly turn on and cause injury. Wiper blade 1 1 Clean the wiper blade rubber with a clean cloth and detergent solution. 1 P88.
Instruments and controls Operation Driving Instrument cluster display Cleaning and care of the vehicle Practical hints Car care Technical data 304 Light alloy wheels Cup holder Mercedes-Benz approved Wheel Care should be used for regular cleaning of the light alloy wheels. Use a gentle dishwashing detergent or mild detergent for delicate fabrics as a washing solution. Wipe with a cloth moistened in lukewarm solution. Do not use scouring agents.
Upholstery Hard plastic trim items Using aftermarket seat covers or wearing clothing that have the tendency to give off coloring (e.g. when wet etc.) may cause the upholstery to become permanently discolored. By lining the seats with a proper intermediate cover, contact-discoloration will be prevented. Pour Mercedes-Benz approved Interior Care onto soft lint-free cloth and apply with light pressure. Plastic and rubber parts Do not use oil or wax on these parts.
Technical data Spare parts service ........................308 Warranty coverage .........................308 Identification labels .......................309 Layout of poly-V-belt drive ............ 311 Technical data ................................ 312 Fuels, coolants, lubricants etc. - capacities .......................... 318 Contents - Technical data Instruments and controls Operation Engine oils ...................................... 320 Engine oil additives ......................
Instruments and controls Operation Driving Instrument cluster display Technical data Practical hints Car care Technical data 308 Spare parts service Warranty coverage All authorized Mercedes-Benz Centers maintain a stock of original spare parts required for maintenance and repair work. In addition, strategically located parts distribution centers provide quick and reliable parts service.
Identification labels P63.20-2368-26 1 Certification label 2 Vehicle Identification Number (VIN) When ordering spare parts, please specify vehicle identification and engine number.
Instruments and controls Operation Driving Instrument cluster display Technical data Practical hints Car care Technical data 310 3 VIN, visible (lower edge of windshield) 3 6 7 4 4 Engine number 5 Body number and paintwork number 6 Emission control label 7 Information label, California version Vacuum line routing for emission control system 5 E 320 shown Index
Layout of poly-V-belt drive 1 Automatic belt tensioner 2 Crankshaft 3 Air conditioner compressor 5 4 Generator (alternator) 6 5 Idler pulley 1 6 Power steering pump 7 7 Coolant pump 4 2 3 Technical data Instruments and controls 311 Operation Driving Instrument cluster display Practical hints Car care Technical data Index
Instruments and controls Operation Instrument cluster display Driving Technical data Practical hints Car care Technical data 312 Technical data Model E 320 (210.065)1 E 320 AWD (210.082)1 E 430 (210.070)1 E 430 AWD (210.270) 1 E 55 AMG (210.074)1 Engine 112 113 113 Mode of operation 4-stroke engine, gasoline injection 4-stroke engine, gasoline injection 4-stroke engine, gasoline injection No. of cylinders 6 8 8 Bore 3.54 in (89.90 mm) 3.54 in (89.90 mm) 3.82 in (97.
Rims – Tires Model E 320 (without Sport Package) Rims (light alloy) Wheel offset 71/2 J x 16 H 2 1.6 in (41 mm) All season tires: Radial-ply tires 215/55 R 16 93 H Winter tires: Radial-ply tires 215/55 R 16 93 H M+S Spare wheel Rim (steel) Wheel offset 71/2 J x 16 H 2 1.
Instruments and controls Operation Driving Instrument cluster display Technical data Practical hints Car care Technical data 314 Model E 320 (Sport Package) E 430 (without Sport Package) E 430 (Sport Package) Rims (light alloy) Wheel offset 8 J x 17 H2 1.46 in (37 mm) 71/2 J x 17 H2 1.46 in (37 mm) 8 J x 17 H2 1.
Model E 55 AMG Rims and summer tires Spare wheel Rims front axle (AMG light alloy) Wheel offset 8 J x 18 H 2 1.2 in (31 mm) Rims rear axle (AMG light alloy) Wheel offset 9 J x 18 H 2 1.4 in (35 mm) Radial-ply tires, front axle Radial-ply tires, rear axle 245/40 ZR 184 275/35 ZR 184 Rim (AMG light alloy) Wheel offset 71/2 J x 17 H 2 1.46 in (37 mm) Summer tire: Radial-ply tire 235/45 R 17 94 W3 3 Also permissible 235/ 45 ZR 17. 4 Must not be used with snow chains.
Instruments and controls Operation Driving Instrument cluster display Technical data Practical hints Car care Technical data 316 Electrical system Model E 320 E 430 E 55 AMG Generator (alternator) 14 V/ 115 A 14 V/ 150 A 14 V/150 A Starter motor 12V/1.7 kW 12V/1.7 kW 12V/ 1.7 kW Battery 12V/100 Ah 12V/100 Ah 12V/ 100 Ah Spark plugs Bosch F 8 DPER Beru 14 FGH 8 DPUR X 2 NGK PFR 5 R-11 0.039 in (1.0 mm) 15 – 22 ft.
Main Dimensions Model E 320 E 320 AWD E 55 AMG Overall vehicle length 189.4 in (4810 mm) 189.4 in (4810 mm) 190 in (4818 mm) Overall vehicle width 70.8 in (1799 mm) 70.8 in (1799 mm) 70.8 in (1799 mm) Overall height 56.7 in (1439 mm) 56.7 in (1439 mm) 56.9 in (1445 mm) Wheel base 111.5 in (2833 mm) 111.5 in (2833 mm) 111.5 in (2833 mm) Track, front 60.2 in (1529 mm) 60.2 in (1529 mm) 61.4 in (1560 mm) Track, rear 59.9 in (1521 mm) 59.9 in (1521 mm) 60.
Instruments and controls Operation Driving Instrument cluster display Fuels, coolants, lubricants etc. - capacities Practical hints Car care Technical data 318 Fuels, coolants, lubricants etc. - capacities Vehicle components and their respective lubricants must match. Therefore use only brands tested and recommended by us. Please refer to the Factory Approved Service Products pamphlet, or inquire at your authorized Mercedes-Benz Center. Model Capacity Fuels, coolants, lubricants etc.
Model Capacity Fuels, coolants, lubricants etc. Windshield washer system approx. 5.8 US qt (5.5 l) MB Windshield washer concentrate “S” 1 Headlamp washer system approx. 1.9 US qt (1.8 l) MB Windshield washer concentrate “S” 1 approx. 10.6 US qt (10 l) approx. 11.8 US qt (11.2 l) MB Anticorrosion/antifreeze approx. 21.1 US gal (80.0 l) approx. 2.6 US gal (10.0 l) Premium unleaded gasoline: Posted Octane 91 (Avg.
Instruments and controls Operation Driving Instrument cluster display Fuels, coolants, lubricants etc. - capacities Practical hints Car care Technical data 320 Engine oils Air conditioner refrigerant Engine oils are specifically tested for their suitability in our engines. Therefore, use only engine oils recommended by Mercedes-Benz. Information on recommended brands is available at your authorized Mercedes-Benz Center.
Premium unleaded gasoline Fuel requirements Caution! Use only Premium unleaded meeting ASTM standard D 439: To maintain the engine‘s durability and performance, premium unleaded gasoline must be used. If premium unleaded is not available and low octane fuel is used, follow these precautions: The octane number (posted at the pump) must be 91 min. It is an average of both the Research (R) octane number and the Motor (M) octane number: [(R+M)/2]. This is also known as ANTI-KNOCK INDEX.
Instruments and controls Operation Driving Instrument cluster display Fuels, coolants, lubricants etc. - capacities Practical hints Car care Technical data 322 Gasoline additives Coolants A major concern among engine manufacturers is carbon build up caused by gasoline. Mercedes-Benz recommends the use of only quality gasoline containing additives that prevent the build up of carbon deposits.
the engine temperature will increase due to the lower heat transfer capability of the solution. Therefore, do not use more than this amount of anticorrosion/ antifreeze. Before the start of the winter season (or once a year in the hot southern regions), you should have the anticorrosion/antifreeze concentration checked. The coolant is also regularly checked each time you bring your vehicle to your authorized Mercedes-Benz Center for service.
Instruments and controls Operation Driving Instrument cluster display Consumer information Practical hints Car care Technical data 324 Consumer information Treadwear This has been prepared as required of all manufactures of passenger cars under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the “National Traffic and Motor Vehicle Safety Act of 1966”.
Temperature The temperature grades are “A” (the highest), “B”, and “C”, representing the tire‘s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 326 Index A ABS (Antilock brake system) ....................................... 217 Malfunction indicator lamp .....................................237 ABS-SYSTEM malfunction and warning messages ......................242 Adjusting steering wheel ................................................ 81 Air conditioner refrigerant ...........................................
Block heater .................................................................... 210 BRAKE ASSIST malfunction and warning messages ..................... 242 Brake assist system (BAS) ............................................ 215 Malfunction indicator lamp .................................... 237 Brake fluid ..................................................................... 320 BRAKE FLUID - malfunction and warning messages ...................................................
Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 328 Choosing global or selective mode ........................... 32 Electronic main key ....................................................25 Electronic reserve key ................................................ 26 Locking and unlocking .............................................. 31 Mechanical keys .......................................................... 34 Remote control ....
E CHECK ENGINE malfunction indicator lamp ...................................................... 234 Engine Oil Additives ..................................................... 320 Engine oil consumption ................................................ 118 Engine oil level Checking ............................................................. 117, 260 Warning ..................................................................... 250 ENGINE OIL LEVEL malfunction and warning messages ..........................
Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 330 Parking lamps ..................................................288, 289 Replacing bulbs .........................................................285 Side marker lamp, front ...........................................290 Standing lamps .................................................288, 289 Taillamp assemblies .................................................
I K Identification labels .......................................................309 Illuminated vanity mirrors ........................................... 161 Indicator lamps in the instrument cluster ............................................. 88, 234 Individual settings ..........................................................110 Infant and child restraint systems ................................ 78 Information call See Tele Aid ...............................................................
Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 332 M Maintenance ................................................................... 177 Malfunction and indicator lamp in the center console ................................................238 Malfunction and indicator lamps in the instrument cluster .........................................234 Malfunction and warning messages ...........................239 ABS-SYSTEM ..............
N Power assistance ........................................................... 204 Power seats front ..............................................................46 Power windows ...............................................................154 Blocking of rear door window operation ...............155 Opening and closing ...................................................33 Synchronizing power windows ............................... 156 Problems with your vehicle .........................................
Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 334 REMOVE KEY malfunction and warning messages ......................248 Replacing bulbs ..............................................................285 Replacing wiper blade insert .......................................296 Reporting Safety Defects ................................................ 15 Reserve key .......................................................................
Roadside Assistance .................................................182 TELE AID - malfunction and warning messages ................................................... 249 Telephone ........................................................................100 General notes ............................................................. 176 Incoming call .............................................................104 Redialing ....................................................................
Instruments and controls Operation Driving Instrument cluster display Index Practical hints Car care Technical data 336 Trunk .................................................................................39 Remote opening .......................................................... 29 Separately locked ........................................................40 Trunk lamp .....................................................................298 Trunk lid Emergency release ............................
Service and Literature Your authorized Mercedes-Benz Center has trained technicians and original Mercedes-Benz parts to service your vehicle properly. For expert advice and quality service, see your authorized Mercedes-Benz Center. If your are interested in obtaining service literature for your vehicle, please contact your authorized Mercedes-Benz Center. We consider this the best way for you to obtain accurate information for your vehicle.
Order No. 6515 1078 13 Part No.
