Owners Manual Owner manual

X
Press the : or 9 button to set Off,
Standard or Adaptive.
X
Press the a button to save the setting.
When Lane Keeping Assist or Active Lane
Keeping Assist is activated, the
multifunction display shows the lane
markings as bright lines in the assistance
graphic.
For further information about Lane Keeping
Assist, see (Y page 194).
For further information about Active Lane
Keeping Assist, see (Y page 199).
Maintenance menu
In the Service menu, you have the following
options:
R
Calling up display messages
(Y page 222)
R
Restarting the tire pressure loss warning
system (Canada only) (Y page 321)
R
Checking the tire pressure electronically
(Y page 322)
R
Calling up the service due date
(Y page 286)
Settings menu
Introduction
In the Settings menu, you have the following
options:
R
Changing the instrument cluster settings
(Y page 215)
R
Changing the light settings (Y page 216)
R
Changing the vehicle settings
(Y page 217)
R
Changing the convenience settings
(Y page 218)
R
Restoring the factory settings
(Y page 219)
Instrument cluster
Selecting the unit of measurement for
distance
The Display Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in kilometers or miles
in the multifunction display.
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X
Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Instr. Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/Odometer:
function.
You will see the selected setting: km or
miles
.
X
Press the a button to save the setting.
The selected unit of measurement for
distance applies to:
R
the digital speedometer in the Trip menu
R
the odometer and the trip odometer
R
the trip computer
R
current consumption and the range
R
the navigation instructionsinthe Navi
menu
R
cruise control
Menus and submenus
215
On-board computer and displays
Z