Owner's manual
Setting the time/date format
X
Select Vehicle in the main function bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select System by turning cVd the
COMAND controller and press W to
confirm.
X
Select Time by turning cVd the COMAND
controller and press W to confirm.
X
Select Format and press W to confirm.
The # symbols show the current settings.
Abbreviation Meaning
DD/MM/YYYY
Day/Month/Year
(date format)
HH/MM
Hours/Minutes
(time format)
You can set the 24-hour or the AM/PM
format.
X
Set the format by turning cVd the
COMAND controller and press W to
confirm.
Setting the time zone and switching
between summer and standard time
X
Select Vehicle in the main function bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select System by turning cVd the
COMAND controller and press W to
confirm.
X
Select Time by turning cVd the COMAND
controller and press W to confirm.
X
Select Time zone and press W to confirm.
A list of time zones appears. The # dot
indicates the current setting.
X
Select the time zone and press W to
confirm.
X
To switch automatic changeover on/
off: select Automatic summer/winter
time changeover or Automatic summer/
winter time changeover by turning
cVd the COMAND controller and press
W to confirm.
The # dot indicates the current setting.
Read-aloud settings
Setting the text reader speed
X
Select Vehicle by turning cVd the
COMAND controller and press W to
confirm.
X
Select System and press W to confirm.
X
Select Text reader and press W to
confirm.
X
Select Set text reader speed and press
W to confirm.
A list appears. The # dot indicates the
current setting.
X
Select a setting by turning cVd the
COMAND controller and press W to
confirm.
Voice Control System settings
Opening/closing the help window
The help window shows you additional
information during individualization and voice
control operation.
X
Select Vehicle in the main function bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select System by turning cVd the
COMAND controller and press W to
confirm.
130
System settings
COMAND