Owner's manual

stores the destination in the address book
with the complete navigable address data.
In this case, navigation can be started
without any further data input.
If the contact entry contains a postal
address, e.g. as a result of importing a
vCard, the system can also navigate to this
address. If the data is incomplete or
unclear, COMAND asks the user to enter
the relevant address data. After the entry
has been completed and navigation has
been started, COMAND replaces the
existing address with the navigable
address if necessary.
X
Search for an address book entry using the
¤ symbol.
X
Display the details about an entry and
highlight the address data field.
X
Select Options by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X
Select Navigate and press W to confirm.
X
Select Start and press W to confirm.
i
You may only select Navigate if the
address data field contains complete,
navigable data. This is indicated by the ¤
symbol.
Voice tags*
i
Voice tags are entered via Voice Control
System*; see the separate operating
instructions for Voice Control System*.
Adding or changing a voice tag
i
You can add one voice tag per address
book entry.
X
Search for an address book entry with or
without a voice tag (¦ symbol).
X
Select Options by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X
Select Voice tag and press W to confirm.
X
Select Add or Edit and press W to confirm.
Subsequent operation is controlled
by voice. Voice Control System* guides you
through the menus.
Deleting a voice tag
X
Search for an address book entry with a
voice tag.
X
Select Options by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X
Select Voice tag and press W to confirm.
X
Select Delete and press W to confirm.
A deletion prompt appears.
Listening to a voice tag
X
Search for an address book entry with a
voice tag.
X
Select Options by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X
Select Voice tag and press W to confirm.
X
Select Listen and press W to confirm.
You will hear the voice tag.
Using call lists
Introduction
COMAND displays calls received (including
missed calls) and made during phone
operation in lists.
i
The respective menu item can only be
selected if calls have already been made or
received in COMAND or if the call lists have
been imported from the telephone.
Opening the call list and selecting an
entry
X
To call up the telephone menu: press the
S function button.
X
Select Call lists in the telephone basic
menu by sliding VÆ and turning cVd the
192
Telephone
COMAND
* optional