Owner's manual

If DISTRONIC PLUS detects a vehicle in front,
the speedometer dial lights up between
speed of the vehicle in front : and stored
speed ;.
DISTRONIC PLUS displays in the
multifunction display
General notes
In the Assistance menu (Y page 339) of the
on-board computer, you can select the
distance display and activate or deactivate
PRE-SAFE
®
Brake.
Display when DISTRONIC PLUS is
deactivated
X
Select the Distance display function
using the on-board computer
(Y page 339).
When DISTRONIC PLUS is deactivated, you
will see the following in the multifunction
display:
:
Symbol for activated PRE-SAFE
®
Brake
;
Vehicle in front, if detected
=
Distance indicator, current distance to
the vehicle in front
?
Specified minimum distance to the
vehicle in front, adjustable
A
Own vehicle
Display when DISTRONIC PLUS is
activated
X
Select the Distance display function
using the on-board computer
(Y page 339).
You will see the stored speed for about five
seconds when you activate DISTRONIC PLUS.
After this time, you will see the following in
the multifunction display while DISTRONIC
PLUS is activated:
:
DISTRONIC PLUS activated
;
Own vehicle
=
Specified minimum distance to the
vehicle in front, adjustable
?
Vehicle in front, if detected
Deactivating DISTRONIC PLUS
There are several ways to deactivate
DISTRONIC PLUS:
X
Briefly press the cruise control lever
forwards :.
or
X
Brake, unless the vehicle is stationary.
i
The last speed stored remains stored until
you switch off the engine.
i
DISTRONIC PLUS is not deactivated if you
depress the accelerator pedal. If you
300
Driving systems
Driving and parking