Owner's manual

correcting brake application is not sufficient
to bring your vehicle back to the original lane.
In such cases, you must steer the vehicle
yourself to ensure that it does not leave the
lane.
Active Lane Keeping Assist does not detect
road and traffic conditions. Always make sure
that there is sufficient distance to the side for
other traffic or obstacles. In rare cases,
unclear markings or particular structures on
the roadway can be recognized as solid lane
markings. An inappropriate brake application,
e.g. after intentionally driving over a solid lane
marking, may be interrupted at any time by
steering slightly in the opposite direction.
Active Lane Keeping Assist cannot take
account of weather conditions.
You are responsible for the vehicle's speed,
braking in good time, and steering correctly.
Always adapt your driving style to suit the
prevailing road and weather conditions.
Always pay attention to traffic conditions and
your surroundings. Otherwise, you may fail to
recognize dangers in time, cause an accident
and injure yourself and others.
No lane-correcting brake application occurs
if:
R
you clearly and actively steer, brake, or
accelerate.
R
you cut the corner on a sharp bend.
R
you switch on the turn signals.
R
a driving safety system intervenes, such as
ESP
®
, PRE-SAFE
®
Brake or Active Blind
Spot Assist.
R
you have adopted a sporty driving style with
high cornering speeds or high rates of
acceleration.
R
ESP
®
is deactivated.
R
the transmission is not in position D.
R
a loss of tire pressure or a defective tire has
been detected and displayed.
Active Lane Keeping Assist does not detect
road and traffic conditions. An inappropriate
brake application may be interrupted at any
time if you:
R
steer slightly in the opposite direction
R
use a turn signal
R
clearly brake or accelerate
A lane-correcting brake application is
interrupted automatically if:
R
a driving safety system intervenes, such as
ESP
®
, PRE-SAFE
®
Brake or Active Blind
Spot Assist.
R
lane markings can no longer be recognized.
Activating Active Lane Keeping Assist
X
Activate Active Lane Keeping Assist using
the on-board computer .
Symbol : appears in the instrument
cluster.
If you drive at speeds above
40 mph (60 km/h) and lane markings are
detected, symbol : is displayed in green.
Active Lane Keeping Assist is ready for use.
Driving systems
325
Driving and parking
Z