Operating instructions

X
Select the list symbol to the right of the
entry by sliding VY the COMAND control-
ler and press W to confirm.
X
Select Assign Speed Dial PresetAssign Speed Dial Preset and
press W to confirm.
The speed dial list appears. The selected
phone book entry is listed as the first entry.
The next available speed dial preset is high-
lighted.
X
Select the speed dial preset by turning
cVd the COMAND controller and press
W to confirm.
The phone book entry is saved in the speed
dial preset.
Making a call via speed dial
The speed dial list contains stored phone
book entries (Y page 143).
Option 1:
X
Hold down one of the number keys for lon-
ger than two seconds.
The telephone basic menu displays the
selected entry. This initiates dialing.
Option 2:
X
Call up the telephone basic menu
(Y page 131).
X
Select CallCall ListsLists by sliding VÆ and turn-
ing cVd the COMAND controller and press
W to confirm.
The speed dial list appears.
X
Select SpeedSpeed DialDial PresetPreset ListList by turn-
ing cVd the COMAND controller and press
W to confirm.
The speed dial list appears.
X
Select preset and press W to confirm.
The telephone basic menu displays the
selected entry. This initiates dialing.
Deleting a speed dial number
X
To delete a speed dial number: select
Delete Speed Dial PresetDelete Speed Dial Preset in the
"Speed dial" menu by turning cVd the
COMAND controller and press W to con-
firm.
The speed dial number is deleted.
X
To delete all speed dial numbers: select
Delete All Speed Dial PresetsDelete All Speed Dial Presets in the
"Speed dial" menu by turning cVd the
COMAND controller and press W to con-
firm.
You will be asked whether you want to con-
tinue.
X
Select YesYes or NoNo and press W to confirm.
If you select YesYes, all speed dial presets will
be deleted from the speed dial list.
If you select NoNo, the process will be can-
celed.
Text messages
Information and requirements
In order to be able to use the text message
function, the mobile phone has to support the
MAP Bluetooth
®
profile (Message Access
Profile).
If the above conditions are met, new incoming
text messages appear in the COMAND text
message inbox. The / symbol appears in
the status bar. The symbol disappears once
you have read the text message. The ú
mail symbol is displayed if the text message
memory is full. The symbol is no longer dis-
144
Text messages
Telephone