Operating instructions

i The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order
to work properly:
R
route guidance on routes with time-
dependent traffic guidance
R
calculation of expected time of arrival
i
With this function, you can set the time
for every display in the vehicle.
Setting the time/date format
X
Press the W button.
X
Select TimeTime by turning cVdthe COMAND
controller and press W to confirm.
X
Select FormatFormat and press W to confirm.
The # symbols show the current settings.
X
Set the format by turning cVdthe
COMAND controller and press W to con-
firm.
Abbreviation Meaning
DDDD . MMMM . YYYY
Day . Month . Year
(date format, two digits)
MMMM / DDDD / YYYYYYYY
Month/Day/Year
date format, year (all
four digits)
YYYY / MMMM / DDDD
Year/Month/Day
date format, year (two
digits)
HHHH : MM (24MM (24
hrs)hrs)
Hours : Minutes
(24 hour time format)
HHHH : MMMM (AM/PM)(AM/PM)
Hours : Minutes
(AM/PM time format)
Adjusting the time zone and switching
to Daylight Savings Time (Summer)
X
Press W.
X
Select TimeTime by turning cVdthe COMAND
controller and press W to confirm.
X
Select TimeTime ZoneZone and press W to confirm.
A list of countries or time zones appears.
The # dot indicates the current setting.
X
Select the country or time zone by turning
cVd the COMAND controller and press
W to confirm.
A time zone list may also be displayed,
depending on the country selected.
X
Select the time zone and press W to con-
firm.
The entry for the Automatic Time Set‐Automatic Time Set‐
tingstings is accepted.
Subsequent operation depends on whether
the automatic changeover function to
summer time is available.
X
To change manually: select ONON or OFFOFF and
press W to confirm.
X
To change to automatic time: select
AutomaticAutomatic and press W to confirm.
The entry for the Automatic Time Set‐Automatic Time Set‐
tingstings is accepted.
X
To switch the automatic time setting
off/on: press the W button.
X
Select TimeTime by turning cVdthe COMAND
controller and press W to confirm.
X
Press W to confirm the AutomaticAutomatic TimeTime
SettingsSettings.
Switch the automatic time setting off ª or
on again O.
To switch on: the menu item is switched
on as the default setting. If the AutomaticAutomatic
Time SettingsTime Settings is switched off and you
switch it on again, the last settings for the
time zone and summer time changeover
are selected.
To switch off: the time zone is deselected
and the summer time is switched off. If
AutomaticAutomatic is set for the summer time
changeover, a prompt will appear asking
whether this should be maintained.
X
Select YesYes or NoNo and press W to confirm.
Time settings
43
System settings