Operating instructions

Importing/exporting data

Insert the SD memory card (Y page 191).

Connect a USB device (e.g. a USB memory

stick) (Y page 191).

Press W.

The system menu appears.

Select SettingsSettings by turning cVd the

COMAND controller and press W to con-

firm.

Select Import/Export DataImport/Export Data and press

W to confirm.

Select Import DataImport Data or Export DataExport Data and

press W to confirm.

If PIN protection is activated, a PIN prompt

appears when you select Export DataExport Data.

Enter the PIN, select¬and press W to

confirm.

You can now proceed in the same way as if

PIN protection was deactivated.

To select a preset: select MemoryMemory CardCard or

USB StorageUSB Storage and press W to confirm.

Select All DataAll Data and press W to confirm.

This function exports all the data to the

selected disc.

Select the data type and press W to con-

firm.

Depending on the previous entry, select the

data type for the export O or not ª.

Select Cont.Cont. and press W to confirm.

Personal music files in the MUSIC REG-

ISTER cannot be saved and imported again

using this function.

Reset function

You can completely reset COMAND to the

factory settings. Amongst other things, this

will delete all personal COMAND data. This

includes the station presets, entries in the

destination memory and in the list of previous

destinations in the navigation system and

address book entries. In addition, any acti-

vated PIN protection, which you have used to

protect your data against unwanted export,

will be deactivated. Resetting is recom-

Reset function

System settings