Operating instructions

X
Select the seat (Y page 52).
X
Select Seat SurfaceSeat Surface by turning cVd the
COMAND Controller and press W to con-
firm.
A scale appears.
X
Turn cVd or slide ZVÆ the COMAND con-
troller and press W to confirm.
X
To exit the menu: press the k back
button.
Adjusting the seat contour in the lum-
bar region of the seat backrest
The availability of this function depends on
the type of seat and the vehicle model series.
This function allows you to adjust the air
cushions in the lumbar region of the backrest
(4-way lumbar support).
X
Select the seat (Y page 52).
X
Select LumbarLumbar by turning cVd the
COMAND controller and press W to con-
firm.
A crosshair appears. You can make two
settings:
R
Vertical: to move the point of greatest
lumbar support up or down
R
Horizontal: to adjust the amount of sup-
port
X
Slide ZVÆ or XVY the COMAND controller
and press W to confirm.
X
To exit the menu: press the k back
button.
Adjusting the sides of the seat backrest
(backrest side bolsters)
The availability of this function depends on
the type of seat and the vehicle model series.
X
Select the seat (Y page 52).
X
Select Seatb. SidesSeatb. Sides by turning cVd the
COMAND controller and press W to con-
firm.
A scale appears.
X
Turn cVd or slide ZVÆ the COMAND con-
troller and press W to confirm.
X
To exit the menu: press the k back
button.
i
For vehicle model series with a dynamic
multicontour seat: if the driving dynamics
are activated and respond to a change of
direction (e.g. when cornering), the back-
rest side bolsters cannot be temporarily
adjusted.
Adjusting the seat side bolsters
The availability of this function depends on
the type of seat and the vehicle model series.
Seat functions
53
Vehicle functions