Operating instructions

X
Turn cVd or slide ZVÆ the COMAND con-
troller and press W to confirm.
The massage function runs for approx-
imately 15 to 25 minutes, depending on the
setting.
X
To exit the menu: press the k back
button.
Adjusting the driving dynamics
This function is available on vehicle model
series with a dynamic multicontour seat.
X
Select the seat (Y page 52).
X
Select Dynamic SeatDynamic Seat by turning cVd the
COMAND controller and press W to con-
firm.
A scale appears.
You can select:
R
00: Off
R
11: level 1 (medium setting)
R
22: level 2 (high setting)
X
Turn cVd or slide ZVÆ the COMAND con-
troller and press W to confirm.
X
To exit the menu: press the k back
button.
Resetting all adjustments
X
Select the seat (Y page 52).
X
Select Reset AllReset All by turning cVd the
COMAND controller and press W to con-
firm.
A prompt appears.
X
Select YesYes or NoNo and press W to confirm.
If you select NoNo, the process will be can-
celed.
After you select YesYes, all seat adjustments
are reset to the default values (factory set-
ting).
Rear view camera
The rear view camera is only an aid. It is not
a replacement for your attention to your
immediate surroundings. You are always
responsible for safe maneuvering and park-
ing. When maneuvering or parking, make sure
that there are no persons, animals or objects
in the area in which you are maneuvering.
The image from the rear view camera is
shown in the COMAND display when reverse
gear is engaged if:
R
your vehicle is equipped with a rear view
camera.
R
COMAND is switched on
R
the Activation by R gearActivation by R gear function is
activated.
If the function is activated, the COMAND dis-
play will automatically switch back to the pre-
Rear view camera
55
Vehicle functions